On Fri, Jan 02, 2015 at 02:42:23PM -0700, Eric S Pulley
wrote:> On Fri, 2 Jan 2015 15:08:55 -0600
> Bob Willcox <bob at immure.com> wrote:
>
> > I just installed 10.1-release on a Samaung EVO 250 SSD using the
> > guided ZFS install steps. Unfortunately, the swap device (it
> > partition does exist on the drive) isn't being created:
> >
> > # cat /etc/fstab
> > # Device Mountpoint FStype Options
> > Dump Pass# /dev/ada0p2 none swap sw
> > 0 0
> >
> > # ls -l /dev/ada0*
> > crw-r----- 1 root operator 0x57 Jan 2 14:29 /dev/ada0
> >
> > # swapinfo
> > Device 1K-blocks Used Avail Capacity
> >
> > # gpart list
> > Geom name: diskid/DISK-S21NNSAFC51114F
> > modified: false
> > state: OK
> > fwheads: 16
> > fwsectors: 63
> > last: 488397134
> > first: 34
> > entries: 128
> > scheme: GPT
> > Providers:
> > 1. Name: diskid/DISK-S21NNSAFC51114Fp1
> > Mediasize: 524288 (512K)
> > Sectorsize: 512
> > Stripesize: 0
> > Stripeoffset: 17408
> > Mode: r0w0e0
> > rawuuid: ed197570-92ff-11e4-a9cb-6805ca13097a
> > rawtype: 83bd6b9d-7f41-11dc-be0b-001560b84f0f
> > label: gptboot0
> > length: 524288
> > offset: 17408
> > type: freebsd-boot
> > index: 1
> > end: 1057
> > start: 34
> > 2. Name: diskid/DISK-S21NNSAFC51114Fp2
> > Mediasize: 8589934592 (8.0G)
> > Sectorsize: 512
> > Stripesize: 0
> > Stripeoffset: 541696
> > Mode: r0w0e0
> > rawuuid: ed35488d-92ff-11e4-a9cb-6805ca13097a
> > rawtype: 516e7cb5-6ecf-11d6-8ff8-00022d09712b
> > label: swap0
> > length: 8589934592
> > offset: 541696
> > type: freebsd-swap
> > index: 2
> > end: 16778273
> > start: 1058
> > 3. Name: diskid/DISK-S21NNSAFC51114Fp3
> > Mediasize: 241468856832 (225G)
> > Sectorsize: 512
> > Stripesize: 0
> > Stripeoffset: 541696
> > Mode: r1w1e1
> > rawuuid: ed38d5f9-92ff-11e4-a9cb-6805ca13097a
> > rawtype: 516e7cba-6ecf-11d6-8ff8-00022d09712b
> > label: zfs0
> > length: 241468856832
> > offset: 8590476288
> > type: freebsd-zfs
> > index: 3
> > end: 488397134
> > start: 16778274
> > Consumers:
> > 1. Name: diskid/DISK-S21NNSAFC51114F
> > Mediasize: 250059350016 (233G)
> > Sectorsize: 512
> > Mode: r1w1e2
> >
> > So, what did I miss? Why isn't the /dev/ada0p2 device getting
created?
> >
> > Thanks for any help!
> >
> > Bob
> >
>
> I just mounted it by diskid under /dev/diskid/... dont know if that
> right but it works
Thanks for the quick response Eric, but I don't have a /dev/ada0p2 device to
'mount' it on (I thought that we used the swapon command to make a swap
device
available, not mount).
I suspect that something that is creates the /dev/ada0p2 device is what's
missing, but I don't know that that is at this point.
--
Bob Willcox | Men who cherish for women the highest
bob at immure.com | respect are seldom popular with them.
Austin, TX | -- Joseph Addison