Hi all,
the short story is that not always all the devices are discovered
correctly, i.e. there are 3 RealTek and sometimes all 3 are discovered,
sometimes 2,sometimes only one.
My guts are telling me it?s a timing issue, is there some delay I can put in?
I tried booting verbose but the problem is till there.
example:
?
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at device
0.0 on pci2
re1: MSI count : 1
re1: MSI-X count : 4
re1: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 260 to local APIC 0 vector 55
re1: using IRQ 260 for MSI-X
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: OUI 0x00e04c, model 0x0011, rev. 4
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-
FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: bpf attached
re1: Ethernet address: 00:0d:b9:34:28:c5
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3
pcib0: allocated type 3 (0xf7d00000-0xf7dfffff) for rid 20 of pcib3
pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 24 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x3000-0x3fff
pcib3: memory decode 0xf7d00000-0xf7dfffff
pcib3: prefetched decode 0xf7c00000-0xf7cfffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x10ec, dev=0x8168, revid=0x06
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled
pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:3:0:0
map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled
pcib3: allocated memory range (0xf7d00000-0xf7d00fff) for rid 18 of pci0:3:0:0
map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14,
enabled
pcib3: allocated prefetch range (0xf7c00000-0xf7c03fff) for rid 20 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at device
0.0 on pci3
re2: MSI count : 1
re2: MSI-X count : 4
re2: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 261 to local APIC 0 vector 56
re2: using IRQ 261 for MSI-X
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x80000000
re2: MAC rev. 0x00000000 <?????????------------ notice this is now zero!
re2: Unknown H/W revision: 0x80000000
device_attach: re2 attach returned 6
?
thanks,
danny
On Tuesday, June 24, 2014 6:48:56 am Daniel Braniss wrote:> Hi all, > the short story is that not always all the devices are discovered > correctly, i.e. there are 3 RealTek and sometimes all 3 are discovered, > sometimes 2,sometimes only one. > My guts are telling me it?s a timing issue, is there some delay I can put in? > I tried booting verbose but the problem is till there. > example: > ? > re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at device 0.0 on pci2 > re1: MSI count : 1 > re1: MSI-X count : 4 > re1: attempting to allocate 1 MSI-X vectors (4 supported) > msi: routing MSI-X IRQ 260 to local APIC 0 vector 55 > re1: using IRQ 260 for MSI-X > re1: Using 1 MSI-X message > re1: ASPM disabled > re1: Chip rev. 0x2c000000 > re1: MAC rev. 0x00200000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 > rgephy1: OUI 0x00e04c, model 0x0011, rev. 4 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-> FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > re1: bpf attached > re1: Ethernet address: 00:0d:b9:34:28:c5 > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 > pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3 > pcib0: allocated type 3 (0xf7d00000-0xf7dfffff) for rid 20 of pcib3 > pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 24 of pcib3 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0x3000-0x3fff > pcib3: memory decode 0xf7d00000-0xf7dfffff > pcib3: prefetched decode 0xf7c00000-0xf7cfffff > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=0, physical bus=3 > found-> vendor=0x10ec, dev=0x8168, revid=0x06 > domain=0, bus=3, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 4 messages in map 0x20 > map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled > pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:3:0:0 > map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled > pcib3: allocated memory range (0xf7d00000-0xf7d00fff) for rid 18 of pci0:3:0:0 > map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14, enabled > pcib3: allocated prefetch range (0xf7c00000-0xf7c03fff) for rid 20 of pci0:3:0:0 > pcib3: matched entry for 3.0.INTA > pcib3: slot 0 INTA hardwired to IRQ 18 > re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at device 0.0 on pci3 > re2: MSI count : 1 > re2: MSI-X count : 4 > re2: attempting to allocate 1 MSI-X vectors (4 supported) > msi: routing MSI-X IRQ 261 to local APIC 0 vector 56 > re2: using IRQ 261 for MSI-X > re2: Using 1 MSI-X message > re2: ASPM disabled > re2: Chip rev. 0x80000000 > re2: MAC rev. 0x00000000 <?????????------------ notice this is now zero! > re2: Unknown H/W revision: 0x80000000 > device_attach: re2 attach returned 6The chip rev also looks wrong. I don't know why you are not getting the correct values though. I don't see anything obviously wrong like resource issues with the BARs. -- John Baldwin
Hello, do have the last BIOS version? There were some bugs with PCI bus handling in the first revisions. With build 4/5/2014 I haven't seen such problems until now, but on the other hand I haven't rebooted often. Regards, Yamagi On Tue, 24 Jun 2014 13:48:56 +0300 Daniel Braniss <danny at cs.huji.ac.il> wrote:> Hi all, > the short story is that not always all the devices are discovered > correctly, i.e. there are 3 RealTek and sometimes all 3 are discovered, > sometimes 2,sometimes only one. > My guts are telling me it?s a timing issue, is there some delay I can put in? > I tried booting verbose but the problem is till there. > example: > ? > re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at device 0.0 on pci2 > re1: MSI count : 1 > re1: MSI-X count : 4 > re1: attempting to allocate 1 MSI-X vectors (4 supported) > msi: routing MSI-X IRQ 260 to local APIC 0 vector 55 > re1: using IRQ 260 for MSI-X > re1: Using 1 MSI-X message > re1: ASPM disabled > re1: Chip rev. 0x2c000000 > re1: MAC rev. 0x00200000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 > rgephy1: OUI 0x00e04c, model 0x0011, rev. 4 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT- > FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > re1: bpf attached > re1: Ethernet address: 00:0d:b9:34:28:c5 > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 > pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3 > pcib0: allocated type 3 (0xf7d00000-0xf7dfffff) for rid 20 of pcib3 > pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 24 of pcib3 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0x3000-0x3fff > pcib3: memory decode 0xf7d00000-0xf7dfffff > pcib3: prefetched decode 0xf7c00000-0xf7cfffff > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=0, physical bus=3 > found-> vendor=0x10ec, dev=0x8168, revid=0x06 > domain=0, bus=3, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 4 messages in map 0x20 > map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled > pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:3:0:0 > map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled > pcib3: allocated memory range (0xf7d00000-0xf7d00fff) for rid 18 of pci0:3:0:0 > map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14, enabled > pcib3: allocated prefetch range (0xf7c00000-0xf7c03fff) for rid 20 of pci0:3:0:0 > pcib3: matched entry for 3.0.INTA > pcib3: slot 0 INTA hardwired to IRQ 18 > re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at device 0.0 on pci3 > re2: MSI count : 1 > re2: MSI-X count : 4 > re2: attempting to allocate 1 MSI-X vectors (4 supported) > msi: routing MSI-X IRQ 261 to local APIC 0 vector 56 > re2: using IRQ 261 for MSI-X > re2: Using 1 MSI-X message > re2: ASPM disabled > re2: Chip rev. 0x80000000 > re2: MAC rev. 0x00000000 <?????????------------ notice this is now zero! > re2: Unknown H/W revision: 0x80000000 > device_attach: re2 attach returned 6 > ? > > thanks, > danny > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"-- Homepage: www.yamagi.org XMPP: yamagi at yamagi.org GnuPG/GPG: 0xEFBCCBCB -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 181 bytes Desc: not available URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20140625/77ea1358/attachment.sig>