Hi, I don't know exactly when but some time ago my 3/4g modem stopped working with 9-STABLE. I believe what I see is what is described here: http://forum.pfsense.org/index.php?topic=41055.0 If I insert the stick, this is logged kernel: ugen0.3: <Huawei Technologies> at usbus0 kernel: Ejecting Huawei Technologies HUAWEI Mobile using method 9 and ugen0.3: <HUAWEI Mobile Huawei Technologies> at usbus0, cfg=255 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x12d1 idProduct = 0x1505 bcdDevice = 0x0000 iManufacturer = 0x0003 <Huawei Technologies> iProduct = 0x0002 <HUAWEI Mobile> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Before it was identified as a 0x140c corresponding to a E180V according to usbdevs which is not really correct but it worked. With the new id 0x1505 no serial devices are a created. 0x1505 is a E392 in usbdevs, I guess that is a similar product but apparently Huawei sometimes uses the same id for more than one product. What can I do to get this back to working order except to roll back to 9-STABLE around October? What change to the usb system was done to break E398? Any hints welcome, I need this to work while travelling. Thank you, //per