The third RC build of the 10.0-RELEASE release cycle is now available
on the FTP servers for the amd64, i386, ia64, powerpc, powerpc64 and
sparc64 architectures.
The image checksums follow at the end of this email.
ISO images and, for architectures that support it, the memory stick images
are available here (or any of the FreeBSD mirror sites):
ftp://ftp.freebsd.org/pub/FreeBSD/releases/ISO-IMAGES/10.0/
If you notice problems you can report them through the normal GNATS PR
system or here on the -stable mailing list.
If you would like to use SVN to do a source based update of an existing
system, use the "releng/10.0" branch.
Important note to freebsd-update(8) users: Please be sure to follow the
instructions in the following FreeBSD Errata Notices before upgrading
the system to 10.0-RC3:
- EN-13:04.freebsd-update:
http://www.freebsd.org/security/advisories/FreeBSD-EN-13:04.freebsd-update.asc
- EN-13:05.freebsd-update:
http://www.freebsd.org/security/advisories/FreeBSD-EN-13:05.freebsd-update.asc
Pre-installed virtual machine images for 10.0-RC3 are also available
for amd64 and i386 architectures.
The images are located under the 'snapshots' directory on FTP, here:
ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/VM-IMAGES/10.0-RC3/
The disk images are available in both QCOW2, VHD, and VMDK format. The
image download size is approximately 135 MB, which decompress to a 20GB
sparse image.
The partition layout is:
- 512k - freebsd-boot GPT partition type (bootfs GPT label)
- 1GB - freebsd-swap GPT partition type (swapfs GPT label)
- ~17GB - freebsd-ufs GPT partition type (rootfs GPT label)
Changes between -RC2 and -RC3 include:
- Several minor bugfixes and functionality enhancements to bhyve.
- Add new sysctl, kern.supported_archs, containing the list of
FreeBSD MACHINE_ARCH values whose binaries this kernel can run.
- Add a pkg(8) repository configuration file for cdrom-based package
installation.
- Implement a fix to allow bsdconfig(8) to be able to install
packages included on the DVD.
- Fix pkg(8) multi-repository support by properly respecting 'enabled'
flag.
- Fix Xen build without INET.
- Several bugfixes to bsdinstall(8).
- Fix a ZFS-related panic triggered by an incorrect assertion.
- Fix mountroot> prompt eating most of the characters by not enabling
RXRDY interrupts in the attach routine.
- Fix a regression in ng_ksocket(4).
- Apply patch from upstream Heimdal for encoding fix
The freebsd-update(8) utility supports binary upgrades of amd64 and i386
systems running earlier FreeBSD releases. Systems running earlier
FreeBSD releases can upgrade as follows:
# freebsd-update upgrade -r 10.0-RC3
During this process, freebsd-update(8) may ask the user to help by
merging some configuration files or by confirming that the automatically
performed merging was done correctly.
# freebsd-update install
The system must be rebooted with the newly installed kernel before
continuing.
# shutdown -r now
After rebooting, freebsd-update needs to be run again to install the new
userland components:
# freebsd-update install
It is recommended to rebuild and install all applications if possible,
especially if upgrading from an earlier FreeBSD release, for example,
FreeBSD 9.x. Alternatively, the user can install misc/compat9x and
other compatibility libraries, afterwards the system must be rebooted
into the new userland:
# shutdown -r now
Finally, after rebooting, freebsd-update needs to be run again to remove
stale files:
# freebsd-update install
== ISO CHECKSUMS =
- 10.0-RC3 amd64:
SHA256 (FreeBSD-10.0-RC3-amd64-bootonly.iso) =
a446af2ca4da7b5a5f7513f025fc5727abf0dac051540b1f04596223700e60cd
SHA256 (FreeBSD-10.0-RC3-amd64-disc1.iso) =
a4b16d3e4e04f1dbb9184fdbe18d6587124a6ea2a1794f79122d57373865ab6b
SHA256 (FreeBSD-10.0-RC3-amd64-dvd1.iso) =
ce4edab5d5b485f6478e6171c1de64e9b337109256c5eb5257aceccd78224255
SHA256 (FreeBSD-10.0-RC3-amd64-memstick.img) =
642ff8ad66ead06b18bcf171be79f3f42e6c36bbe0b741c6d98d32a89fb6724a
MD5 (FreeBSD-10.0-RC3-amd64-bootonly.iso) =
584745fc67ca974c146065aa3b3a9a94
MD5 (FreeBSD-10.0-RC3-amd64-disc1.iso) =
fc93de26dc0b2ca1e88cc2fcda18ec05
MD5 (FreeBSD-10.0-RC3-amd64-dvd1.iso) = ed93640aca43b484697d203c7b6f0ab3
MD5 (FreeBSD-10.0-RC3-amd64-memstick.img) =
416ca9f9973e405afba58c11a90c6d7a
- 10.0-RC3 i386:
SHA256 (FreeBSD-10.0-RC3-i386-bootonly.iso) =
1c191afa34e4a8119362c7b08b4e6265fcb0017afd508b060c49de7bcbd5ece3
SHA256 (FreeBSD-10.0-RC3-i386-disc1.iso) =
2d03929465da9042a5424cf97577c4811500a0df4a454631a2aaef41350fe211
SHA256 (FreeBSD-10.0-RC3-i386-dvd1.iso) =
517aced324eac22fe6e65716d63b6d112c0fbac33c243ff327f97e7b6b7cd584
SHA256 (FreeBSD-10.0-RC3-i386-memstick.img) =
d4edc43daf0026d2914f8960a81a2511d8cf8a99c7b8537a7354dfce5066f4ab
MD5 (FreeBSD-10.0-RC3-i386-bootonly.iso) =
adddd854699dcd6855386f7ae4ad4784
MD5 (FreeBSD-10.0-RC3-i386-disc1.iso) = f378f7b7c209a3cc13d54aa671233b69
MD5 (FreeBSD-10.0-RC3-i386-dvd1.iso) = bc8e9feb4efd802ce2175c7258055afc
MD5 (FreeBSD-10.0-RC3-i386-memstick.img) =
edffe1cf1bf9c04da31cf4e0ef2c7afd
- 10.0-RC3 ia64:
SHA256 (FreeBSD-10.0-RC3-ia64-bootonly.iso) =
11559db413ca7dae9bb5315277ab0f443dae62222602eae7c4cad0aa201b2976
SHA256 (FreeBSD-10.0-RC3-ia64-disc1.iso) =
9404774d7084cfe57c4eddf57983db25c5c07d1b7798cd1c29b0bcf41d3b7f12
SHA256 (FreeBSD-10.0-RC3-ia64-memstick.img) =
81738d2da1db0d8bc04979e1bed4e55ebeda5efebc3cbd6b2e7d2d24f4b87ceb
MD5 (FreeBSD-10.0-RC3-ia64-bootonly.iso) =
84743bcddda1aa953c837f9f5f4446cd
MD5 (FreeBSD-10.0-RC3-ia64-disc1.iso) = 5ad4b133c3bf7674f4961ec70bb2db47
MD5 (FreeBSD-10.0-RC3-ia64-memstick.img) =
194c35bbfb7b215c597de839b9fc15f9
- 10.0-RC3 powerpc:
SHA256 (FreeBSD-10.0-RC3-powerpc-bootonly.iso) =
8fd8f787afd3eebe869a9476bb3451927480f670bd75d6f526e5d24cbe5c6aba
SHA256 (FreeBSD-10.0-RC3-powerpc-disc1.iso) =
398b62480e308556faab80fe5e3ba6923ed70e02b86ad79b5b239b51fcedcada
SHA256 (FreeBSD-10.0-RC3-powerpc-memstick.img) =
d4a7374cc70dc1de66c55eafc849fedadd9ac14018425836c2a964e9edf8bb41
MD5 (FreeBSD-10.0-RC3-powerpc-bootonly.iso) =
c9586f8c6ea86c1355d9199b63e66bc0
MD5 (FreeBSD-10.0-RC3-powerpc-disc1.iso) =
353b94e352f8f4375bf0b0f3dd598f9f
MD5 (FreeBSD-10.0-RC3-powerpc-memstick.img) =
8d301fc18497e268e5c402632e93072a
- 10.0-RC3 powerpc64:
SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-bootonly.iso) =
f1b17c61c5b372b8d8f4db380768e46f89ba7d6763f17166cb89e624db85fa42
SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-disc1.iso) =
f3e8e2ee07ae63c2de93804024d3befa1493e6b2513d508e46831a952a3fc083
SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-memstick.img) =
4b8dcec616873cf4d07cfbb1432df6c1a782dbb02322172b7ce97d05ee991bc3
MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-bootonly.iso) =
7d4dbbde1f53cdfb3e51e30116be5951
MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-disc1.iso) =
69b95751cd4dd721b7ccd9d41999cb86
MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-memstick.img) =
1b7251b6c8b1aa43fe36f4f8679cbef6
- 10.0-RC3 sparc64:
SHA256 (FreeBSD-10.0-RC3-sparc64-bootonly.iso) =
76ed5346bd2bf4fc65503c7beca039fa4c93ea3dd175e0d6d9026f63eaf5049a
SHA256 (FreeBSD-10.0-RC3-sparc64-disc1.iso) =
c18504c4d0626309e41be70477dc7b97ab9c58517479cd2ebd4d7c3b68e3a31b
MD5 (FreeBSD-10.0-RC3-sparc64-bootonly.iso) =
dddcd2c1ecb37e57e4f458bf24ba5d40
MD5 (FreeBSD-10.0-RC3-sparc64-disc1.iso) =
caad20dbabd38ffdfce7d1d92b37e40a
== VM IMAGE CHECKSUMS =
- 10.0-RC3 amd64:
SHA256 (FreeBSD-10.0-RC3-amd64.qcow2.xz) =
a0731577a9563658bc1bafab8cfb3c29a98329e664db96fae13e40630223ee8e
SHA256 (FreeBSD-10.0-RC3-amd64.vhd.xz) =
4e564b4f74d0016d299254f5b5723bf1fb25a9c06d25f93994fe0b52fa9dcfb4
SHA256 (FreeBSD-10.0-RC3-amd64.vmdk.xz) =
2e3c325cb508b62a37c9d7debed58fb833ef61cc2148b5f7a4842177d0a2b45d
MD5 (FreeBSD-10.0-RC3-amd64.qcow2.xz) = e5bfe57a98cc2d323d64dd195e58dc9b
MD5 (FreeBSD-10.0-RC3-amd64.vhd.xz) = d8138f97da9d68f09841bb1a33833e98
MD5 (FreeBSD-10.0-RC3-amd64.vmdk.xz) = 38437fd384c4812953ce9f19c9a4a0d9
- 10.0-RC3 i386:
SHA256 (FreeBSD-10.0-RC3-i386.qcow2.xz) =
057610738176e19eab80b4a127e34ba4a2d1f1e8760c093c016a7f20c7d208d3
SHA256 (FreeBSD-10.0-RC3-i386.vhd.xz) =
4c798503632ae625ddf616a0006ff6039376e3dca0c2ac2375e5980beed99145
SHA256 (FreeBSD-10.0-RC3-i386.vmdk.xz) =
0edc8aaa7b7e968f560fa7dbf5dcad8a5e588f62dd793f0ebbecbc349db85084
MD5 (FreeBSD-10.0-RC3-i386.qcow2.xz) = 5857e8613c3b0685826a2b006d25564a
MD5 (FreeBSD-10.0-RC3-i386.vhd.xz) = da0acf0bf5b3412fa4922e625a1c651e
MD5 (FreeBSD-10.0-RC3-i386.vmdk.xz) = f4f0d948d4fd3afc3e41bbf511fd5240
Glen
Love FreeBSD? Support this and future releases with a donation to
the FreeBSD Foundation! https://www.freebsdfoundation.org/donate/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL:
<http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20131226/e952d5c4/attachment.sig>
On Thu, Dec 26, 2013 at 11:25 AM, Glen Barber <gjb at freebsd.org> wrote:> The third RC build of the 10.0-RELEASE release cycle is now available > on the FTP servers for the amd64, i386, ia64, powerpc, powerpc64 and > sparc64 architectures. > > The image checksums follow at the end of this email. > > ISO images and, for architectures that support it, the memory stick images > are available here (or any of the FreeBSD mirror sites): > > ftp://ftp.freebsd.org/pub/FreeBSD/releases/ISO-IMAGES/10.0/ > > If you notice problems you can report them through the normal GNATS PR > system or here on the -stable mailing list. > > If you would like to use SVN to do a source based update of an existing > system, use the "releng/10.0" branch. > > Important note to freebsd-update(8) users: Please be sure to follow the > instructions in the following FreeBSD Errata Notices before upgrading > the system to 10.0-RC3: > > - EN-13:04.freebsd-update: > > http://www.freebsd.org/security/advisories/FreeBSD-EN-13:04.freebsd-update.asc > > - EN-13:05.freebsd-update: > > http://www.freebsd.org/security/advisories/FreeBSD-EN-13:05.freebsd-update.asc > > Pre-installed virtual machine images for 10.0-RC3 are also available > for amd64 and i386 architectures. > > The images are located under the 'snapshots' directory on FTP, here: > > ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/VM-IMAGES/10.0-RC3/ > > The disk images are available in both QCOW2, VHD, and VMDK format. The > image download size is approximately 135 MB, which decompress to a 20GB > sparse image. > > The partition layout is: > > - 512k - freebsd-boot GPT partition type (bootfs GPT label) > - 1GB - freebsd-swap GPT partition type (swapfs GPT label) > - ~17GB - freebsd-ufs GPT partition type (rootfs GPT label) > > Changes between -RC2 and -RC3 include: > > - Several minor bugfixes and functionality enhancements to bhyve. > - Add new sysctl, kern.supported_archs, containing the list of > FreeBSD MACHINE_ARCH values whose binaries this kernel can run. > - Add a pkg(8) repository configuration file for cdrom-based package > installation. > - Implement a fix to allow bsdconfig(8) to be able to install > packages included on the DVD. > - Fix pkg(8) multi-repository support by properly respecting 'enabled' > flag. > - Fix Xen build without INET. > - Several bugfixes to bsdinstall(8). > - Fix a ZFS-related panic triggered by an incorrect assertion. > - Fix mountroot> prompt eating most of the characters by not enabling > RXRDY interrupts in the attach routine. > - Fix a regression in ng_ksocket(4). > - Apply patch from upstream Heimdal for encoding fix > > The freebsd-update(8) utility supports binary upgrades of amd64 and i386 > systems running earlier FreeBSD releases. Systems running earlier > FreeBSD releases can upgrade as follows: > > # freebsd-update upgrade -r 10.0-RC3 > > During this process, freebsd-update(8) may ask the user to help by > merging some configuration files or by confirming that the automatically > performed merging was done correctly. > > # freebsd-update install > > The system must be rebooted with the newly installed kernel before > continuing. > > # shutdown -r now > > After rebooting, freebsd-update needs to be run again to install the new > userland components: > > # freebsd-update install > > It is recommended to rebuild and install all applications if possible, > especially if upgrading from an earlier FreeBSD release, for example, > FreeBSD 9.x. Alternatively, the user can install misc/compat9x and > other compatibility libraries, afterwards the system must be rebooted > into the new userland: > > # shutdown -r now > > Finally, after rebooting, freebsd-update needs to be run again to remove > stale files: > > # freebsd-update install > > > == ISO CHECKSUMS => > - 10.0-RC3 amd64: > SHA256 (FreeBSD-10.0-RC3-amd64-bootonly.iso) > a446af2ca4da7b5a5f7513f025fc5727abf0dac051540b1f04596223700e60cd > SHA256 (FreeBSD-10.0-RC3-amd64-disc1.iso) > a4b16d3e4e04f1dbb9184fdbe18d6587124a6ea2a1794f79122d57373865ab6b > SHA256 (FreeBSD-10.0-RC3-amd64-dvd1.iso) > ce4edab5d5b485f6478e6171c1de64e9b337109256c5eb5257aceccd78224255 > SHA256 (FreeBSD-10.0-RC3-amd64-memstick.img) > 642ff8ad66ead06b18bcf171be79f3f42e6c36bbe0b741c6d98d32a89fb6724a > > MD5 (FreeBSD-10.0-RC3-amd64-bootonly.iso) > 584745fc67ca974c146065aa3b3a9a94 > MD5 (FreeBSD-10.0-RC3-amd64-disc1.iso) > fc93de26dc0b2ca1e88cc2fcda18ec05 > MD5 (FreeBSD-10.0-RC3-amd64-dvd1.iso) > ed93640aca43b484697d203c7b6f0ab3 > MD5 (FreeBSD-10.0-RC3-amd64-memstick.img) > 416ca9f9973e405afba58c11a90c6d7a > > > - 10.0-RC3 i386: > SHA256 (FreeBSD-10.0-RC3-i386-bootonly.iso) > 1c191afa34e4a8119362c7b08b4e6265fcb0017afd508b060c49de7bcbd5ece3 > SHA256 (FreeBSD-10.0-RC3-i386-disc1.iso) > 2d03929465da9042a5424cf97577c4811500a0df4a454631a2aaef41350fe211 > SHA256 (FreeBSD-10.0-RC3-i386-dvd1.iso) > 517aced324eac22fe6e65716d63b6d112c0fbac33c243ff327f97e7b6b7cd584 > SHA256 (FreeBSD-10.0-RC3-i386-memstick.img) > d4edc43daf0026d2914f8960a81a2511d8cf8a99c7b8537a7354dfce5066f4ab > > MD5 (FreeBSD-10.0-RC3-i386-bootonly.iso) > adddd854699dcd6855386f7ae4ad4784 > MD5 (FreeBSD-10.0-RC3-i386-disc1.iso) > f378f7b7c209a3cc13d54aa671233b69 > MD5 (FreeBSD-10.0-RC3-i386-dvd1.iso) > bc8e9feb4efd802ce2175c7258055afc > MD5 (FreeBSD-10.0-RC3-i386-memstick.img) > edffe1cf1bf9c04da31cf4e0ef2c7afd > > > - 10.0-RC3 ia64: > SHA256 (FreeBSD-10.0-RC3-ia64-bootonly.iso) > 11559db413ca7dae9bb5315277ab0f443dae62222602eae7c4cad0aa201b2976 > SHA256 (FreeBSD-10.0-RC3-ia64-disc1.iso) > 9404774d7084cfe57c4eddf57983db25c5c07d1b7798cd1c29b0bcf41d3b7f12 > SHA256 (FreeBSD-10.0-RC3-ia64-memstick.img) > 81738d2da1db0d8bc04979e1bed4e55ebeda5efebc3cbd6b2e7d2d24f4b87ceb > > MD5 (FreeBSD-10.0-RC3-ia64-bootonly.iso) > 84743bcddda1aa953c837f9f5f4446cd > MD5 (FreeBSD-10.0-RC3-ia64-disc1.iso) > 5ad4b133c3bf7674f4961ec70bb2db47 > MD5 (FreeBSD-10.0-RC3-ia64-memstick.img) > 194c35bbfb7b215c597de839b9fc15f9 > > > - 10.0-RC3 powerpc: > SHA256 (FreeBSD-10.0-RC3-powerpc-bootonly.iso) > 8fd8f787afd3eebe869a9476bb3451927480f670bd75d6f526e5d24cbe5c6aba > SHA256 (FreeBSD-10.0-RC3-powerpc-disc1.iso) > 398b62480e308556faab80fe5e3ba6923ed70e02b86ad79b5b239b51fcedcada > SHA256 (FreeBSD-10.0-RC3-powerpc-memstick.img) > d4a7374cc70dc1de66c55eafc849fedadd9ac14018425836c2a964e9edf8bb41 > > MD5 (FreeBSD-10.0-RC3-powerpc-bootonly.iso) > c9586f8c6ea86c1355d9199b63e66bc0 > MD5 (FreeBSD-10.0-RC3-powerpc-disc1.iso) > 353b94e352f8f4375bf0b0f3dd598f9f > MD5 (FreeBSD-10.0-RC3-powerpc-memstick.img) > 8d301fc18497e268e5c402632e93072a > > > - 10.0-RC3 powerpc64: > SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-bootonly.iso) > f1b17c61c5b372b8d8f4db380768e46f89ba7d6763f17166cb89e624db85fa42 > SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-disc1.iso) > f3e8e2ee07ae63c2de93804024d3befa1493e6b2513d508e46831a952a3fc083 > SHA256 (FreeBSD-10.0-RC3-powerpc-powerpc64-memstick.img) > 4b8dcec616873cf4d07cfbb1432df6c1a782dbb02322172b7ce97d05ee991bc3 > > MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-bootonly.iso) > 7d4dbbde1f53cdfb3e51e30116be5951 > MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-disc1.iso) > 69b95751cd4dd721b7ccd9d41999cb86 > MD5 (FreeBSD-10.0-RC3-powerpc-powerpc64-memstick.img) > 1b7251b6c8b1aa43fe36f4f8679cbef6 > > > - 10.0-RC3 sparc64: > SHA256 (FreeBSD-10.0-RC3-sparc64-bootonly.iso) > 76ed5346bd2bf4fc65503c7beca039fa4c93ea3dd175e0d6d9026f63eaf5049a > SHA256 (FreeBSD-10.0-RC3-sparc64-disc1.iso) > c18504c4d0626309e41be70477dc7b97ab9c58517479cd2ebd4d7c3b68e3a31b > > MD5 (FreeBSD-10.0-RC3-sparc64-bootonly.iso) > dddcd2c1ecb37e57e4f458bf24ba5d40 > MD5 (FreeBSD-10.0-RC3-sparc64-disc1.iso) > caad20dbabd38ffdfce7d1d92b37e40a > > > == VM IMAGE CHECKSUMS => > - 10.0-RC3 amd64: > SHA256 (FreeBSD-10.0-RC3-amd64.qcow2.xz) > a0731577a9563658bc1bafab8cfb3c29a98329e664db96fae13e40630223ee8e > SHA256 (FreeBSD-10.0-RC3-amd64.vhd.xz) > 4e564b4f74d0016d299254f5b5723bf1fb25a9c06d25f93994fe0b52fa9dcfb4 > SHA256 (FreeBSD-10.0-RC3-amd64.vmdk.xz) > 2e3c325cb508b62a37c9d7debed58fb833ef61cc2148b5f7a4842177d0a2b45d > > MD5 (FreeBSD-10.0-RC3-amd64.qcow2.xz) > e5bfe57a98cc2d323d64dd195e58dc9b > MD5 (FreeBSD-10.0-RC3-amd64.vhd.xz) > d8138f97da9d68f09841bb1a33833e98 > MD5 (FreeBSD-10.0-RC3-amd64.vmdk.xz) > 38437fd384c4812953ce9f19c9a4a0d9 > > > - 10.0-RC3 i386: > SHA256 (FreeBSD-10.0-RC3-i386.qcow2.xz) > 057610738176e19eab80b4a127e34ba4a2d1f1e8760c093c016a7f20c7d208d3 > SHA256 (FreeBSD-10.0-RC3-i386.vhd.xz) > 4c798503632ae625ddf616a0006ff6039376e3dca0c2ac2375e5980beed99145 > SHA256 (FreeBSD-10.0-RC3-i386.vmdk.xz) > 0edc8aaa7b7e968f560fa7dbf5dcad8a5e588f62dd793f0ebbecbc349db85084 > > MD5 (FreeBSD-10.0-RC3-i386.qcow2.xz) > 5857e8613c3b0685826a2b006d25564a > MD5 (FreeBSD-10.0-RC3-i386.vhd.xz) > da0acf0bf5b3412fa4922e625a1c651e > MD5 (FreeBSD-10.0-RC3-i386.vmdk.xz) > f4f0d948d4fd3afc3e41bbf511fd5240 > > > Glen > Love FreeBSD? Support this and future releases with a donation to > the FreeBSD Foundation! https://www.freebsdfoundation.org/donate/ > >I take it that building world and kernel from source should present no problems, right? Is the latest CLang at 3.5 being used or will I need to "hack" the Makefile in /usr/ports/lang to build it?
> The third RC build of the 10.0-RELEASE release cycle is now availableNice :-) Has someone checked src/ + ports/ has been re-made a seamless functional combination for named/bind ? There were various loose ends earlier (paths, defaults etc), after removal from src/. I'm asking as I think I will not be able to catch up in time to look & check before release, ( I'm at RC2 & downloading RC3 images & rebuilding my svn tree that got corrupt, before I'll svn export & make kernel & world & cd /usr/ports/dns/bind9* ; make install ) Cheers, Julian -- Julian Stacey, BSD Unix Linux C Sys Eng Consultant, Munich http://berklix.com Interleave replies below like a play script. Indent old text with "> ". Send plain text, not quoted-printable, HTML, base64, or multipart/alternative.
On Thu, Dec 26, 2013 at 11:25:21AM -0500, Glen Barber wrote:> [...] > Pre-installed virtual machine images for 10.0-RC3 are also available > for amd64 and i386 architectures. > > The images are located under the 'snapshots' directory on FTP, here: > > ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/VM-IMAGES/10.0-RC3/ >> [...] > - 10.0-RC3 i386: > SHA256 (FreeBSD-10.0-RC3-i386.qcow2.xz) = 057610738176e19eab80b4a127e34ba4a2d1f1e8760c093c016a7f20c7d208d3 > SHA256 (FreeBSD-10.0-RC3-i386.vhd.xz) = 4c798503632ae625ddf616a0006ff6039376e3dca0c2ac2375e5980beed99145 > SHA256 (FreeBSD-10.0-RC3-i386.vmdk.xz) = 0edc8aaa7b7e968f560fa7dbf5dcad8a5e588f62dd793f0ebbecbc349db85084 > > MD5 (FreeBSD-10.0-RC3-i386.qcow2.xz) = 5857e8613c3b0685826a2b006d25564a > MD5 (FreeBSD-10.0-RC3-i386.vhd.xz) = da0acf0bf5b3412fa4922e625a1c651e > MD5 (FreeBSD-10.0-RC3-i386.vmdk.xz) = f4f0d948d4fd3afc3e41bbf511fd5240 >An issue with the 10.0-RC3 i386 virtual machine images was brought to our attention. It is still unclear what exactly went wrong, but the images with the checksums above appear to be incomplete. The virtual machine images for i386 have been recreated, and are propagating to FTP now. It may still be a while yet before they are picked up by all mirrors. Checksums for the corrected images are: - 10.0-RC3 i386: SHA256 (FreeBSD-10.0-RC3-i386-20131223-r259778.qcow2.xz) = 76092c843bd91037cf94d48007cd5a054b0ee2744f5475ee50c558ba880520fa SHA256 (FreeBSD-10.0-RC3-i386-20131223-r259778.vhd.xz) = da8632d78cc89e1812c20f18a6aaac727e78ef44f1c3aedd4ffbe9318e50030e SHA256 (FreeBSD-10.0-RC3-i386-20131223-r259778.vmdk.xz) = 137ae9e44e419fc78823ac8f3cc7c9e32bfe5d7a80b7997a96d857dc1f3bd4fb MD5 (FreeBSD-10.0-RC3-i386-20131223-r259778.qcow2.xz) = 936736ff87b11d99408b5b7135c8a025 MD5 (FreeBSD-10.0-RC3-i386-20131223-r259778.vhd.xz) = 770895367a4b22631f54c25d81e11608 MD5 (FreeBSD-10.0-RC3-i386-20131223-r259778.vmdk.xz) = ba62a266ab560711bed0ff53a3177b94 Sorry for the inconvenience to those who have downloaded the incomplete images. Glen -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 834 bytes Desc: not available URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20131227/01d019f9/attachment.sig>