Hi, Just upgraded from 9.2-PRERELEASE to the following: FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 20:01:13 CST 2013 root at cognac:/usr/obj/usr/src/sys/GENERIC i386 and started seeing the following error when I insert a USB flash drive. This flash drive was working fine with 9.2-PRERELEASE. ugen6.2: <Lexar> at usbus6 umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted Anybody else seeing issues with the USB/CAM subsystem with the new the new 9.2-STABLE code?
Joseph Olatt <joji at eskimo.com>:> Hi, > > Just upgraded from 9.2-PRERELEASE to the following: > > FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 > 20:01:13 CST 2013 root at cognac:/usr/obj/usr/src/sys/GENERIC i386 > > and started seeing the following error when I insert a USB flash drive. > This flash drive was working fine with 9.2-PRERELEASE. > > ugen6.2: <Lexar> at usbus6 > umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on > usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x4101 > umass0:2:0:-1: Attached to scbus2 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > > > Anybody else seeing issues with the USB/CAM subsystem with the new the > new 9.2-STABLE code? > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"Joseph, did you find out any more information about this? Last night I ripped a few DVD's and I too saw these messages on the console. I was able to rip the data but still, I'd like to know/do more about this output. Cheers, Jamie -- James Griffin jmzgriffin at gmail.com
I did go from 9 pre to 10, and had a lot of those messages also. I needed to rebuild some ports like hal, smartmontools and other ports to notice the changes made to the cam subsystem. Maybe some of it got backported to 9 as well and you need to rebuild them also. Regards Johan Op 23 dec. 2013 19:45 schreef "Joseph Olatt" <joji at eskimo.com>:> Hi, > > Just upgraded from 9.2-PRERELEASE to the following: > > FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 > 20:01:13 CST 2013 root at cognac:/usr/obj/usr/src/sys/GENERIC i386 > > and started seeing the following error when I insert a USB flash drive. > This flash drive was working fine with 9.2-PRERELEASE. > > ugen6.2: <Lexar> at usbus6 > umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on > usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x4101 > umass0:2:0:-1: Attached to scbus2 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Retrying command > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error > (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > > > Anybody else seeing issues with the USB/CAM subsystem with the new the > new 9.2-STABLE code? > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org" >
Joseph Olatt <joji at eskimo.com> writes:> Hi, > > Just upgraded from 9.2-PRERELEASE to the following: > > FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 > 20:01:13 CST 2013 root at cognac:/usr/obj/usr/src/sys/GENERIC i386 > > and started seeing the following error when I insert a USB flash drive. > This flash drive was working fine with 9.2-PRERELEASE. > > ugen6.2: <Lexar> at usbus6 > umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on > usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x4101...> > > Anybody else seeing issues with the USB/CAM subsystem with the new the > new 9.2-STABLE code?Yes. I'm in the same situation. I went from 9.2-RELEASE to 9.2-STABLE. USB thumb drives worked fine, then after upgrading I see similar errors in /var/log/messages. Jan 7 20:22:18 phe kernel: umass0: <Lenovo USB Flash Drive, class 0/0,rev 2.00/11.00, addr 3> on usbus1 Jan 7 20:22:18 phe kernel: umass0: SCSI over Bulk-Only; quirks = 0x4101 Jan 7 20:22:18 phe kernel: umass0:3:0:-1: Attached to scbus3 Jan 7 20:22:23 phe kernel: (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 Jan 7 20:22:23 phe kernel: (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error Joseph
On Mo, 2013-12-23 at 10:36 -0800, Joseph Olatt wrote:> Hi, > > Just upgraded from 9.2-PRERELEASE to the following: > > FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22 > 20:01:13 CST 2013 root at cognac:/usr/obj/usr/src/sys/GENERIC i386 > > and started seeing the following error when I insert a USB flash drive. > This flash drive was working fine with 9.2-PRERELEASE. > > ugen6.2: <Lexar> at usbus6 > umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on > usbus6 > umass0: SCSI over Bulk-Only; quirks = 0x4101 > umass0:2:0:-1: Attached to scbus2 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 > (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an > error[...]> (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted > > > Anybody else seeing issues with the USB/CAM subsystem with the new the > new 9.2-STABLE code?Me too on a fresh amd64: Jan 8 20:27:51 atom330 kernel: ugen3.2: <OCZ Technology> at usbus3 Jan 8 20:27:51 atom330 kernel: umass0: <OCZ Technology ATV, class 0/0, rev 2.00/11.00, addr 2> on usbus3 Jan 8 20:27:51 atom330 kernel: umass0: SCSI over Bulk-Only; quirks = 0x4101 Jan 8 20:27:51 atom330 kernel: umass0:6:0:-1: Attached to scbus6 Jan 8 20:27:55 atom330 kernel: (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 Jan 8 20:27:55 atom330 kernel: (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error [...] Jan 8 20:28:17 atom330 kernel: (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted This is: $ uname -a FreeBSD atom330.das.netz 9.2-STABLE FreeBSD 9.2-STABLE #0: Tue Jan 7 04:01:28 CET 2014 root at atom330.das.netz:/usr/obj/usr/src/sys/GENERIC amd64 $ dmesg|head -n 20 Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.2-STABLE #0: Tue Jan 7 04:01:28 CET 2014 root at atom330.das.netz:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Atom(TM) CPU 330 @ 1.60GHz (1600.03-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Family = 0x6 Model = 0x1c Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2009550848 (1916 MB) Setup was done 2 days ago. Another machine running i386 from yesterday can flawlessly attach the same thumb drive. HTH anyhow, Marc -- Marc Santhoff <M.Santhoff at web.de>