freebsd stable - Jan 2013 - stable 9.1, bge and ipmi not cooperating

Hi,
the last batch of changes to bge caused the ipmi to stop working  on a
Sun Fire X2200 M2, and
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003>
mem
0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus2: <MII bus> on bge0

bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003>
mem
0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus3: <MII bus> on bge1

cheers,
	danny

On Wed, Jan 02, 2013 at 08:33:41AM +0200, Daniel Braniss
wrote:
> Hi,
> the last batch of changes to bge caused the ipmi to stop working  on a
> Sun Fire X2200 M2, and
> bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x009003> mem
> 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6
> bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
> miibus2: <MII bus> on bge0
> 
> bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x009003> mem
> 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6
> bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
> miibus3: <MII bus> on bge1
> 
Could you narrow down which revision broke IPMI?
And what problems are you seeing?
I don't have IPMI-capable controller to test. IPMI support for
old controllers(pre-5717 controllers) was not complete and it was
luck if it worked on a couple of controllers.