Hi, I have not noticed this before, but my system rebooted this morning and in the following security report I found a lot of messgaes in the dmesg-part like: +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 +(probe0:arcmsr0:0:16:1): CAM status: Command timeout +(probe0:arcmsr0:0:16:1): Retrying command +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 +(probe0:arcmsr0:0:16:1): CAM status: Command timeout +(probe0:arcmsr0:0:16:1): Retrying command And it seems that bus 16 is: +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device The system has been running FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed Nov 14 13:25:55 CET 2012 root at zfs.digiware.nl:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 for already a while. Anybody suggestions as to why I have these messages? They are during the boot sequence, so no smartd talking to the disks at that moment. --WjW ps: dmesg, config, etc.... at: http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS ps2: upgrading to the most recent 9.1
Hello :-) I have noticed similar behavior with one of my Toshiba DVD drives when disk was inserted, removing disk and/or drive solved the issue, but I guess it wtill exist in the driver..? Best regards, Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info On Dec 17, 2012 11:58 AM, "Willem Jan Withagen" <wjw at digiware.nl> wrote:> Hi, > > I have not noticed this before, but my system rebooted this morning and > in the following security report I found a lot of messgaes in the > dmesg-part like: > > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > > And it seems that bus 16 is: > +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 > +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device > > The system has been running > FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed > Nov 14 13:25:55 CET 2012 > root at zfs.digiware.nl:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 > for already a while. > > Anybody suggestions as to why I have these messages? > > They are during the boot sequence, so no smartd talking to the disks at > that moment. > > --WjW > > ps: dmesg, config, etc.... at: > http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS > ps2: upgrading to the most recent 9.1 > _______________________________________________ > freebsd-stable at freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org" >
Check the smart results of each disk in the array you may have a failing disk. ----- Original Message ----- From: "Willem Jan Withagen" <wjw at digiware.nl> To: "FreeBSD Stable Users" <freebsd-stable at freebsd.org> Sent: Monday, December 17, 2012 10:58 AM Subject: Strange CAM errors> Hi, > > I have not noticed this before, but my system rebooted this morning and > in the following security report I found a lot of messgaes in the > dmesg-part like: > > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > > And it seems that bus 16 is: > +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 > +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device > > The system has been running > FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed > Nov 14 13:25:55 CET 2012 > root at zfs.digiware.nl:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 > for already a while. > > Anybody suggestions as to why I have these messages? > > They are during the boot sequence, so no smartd talking to the disks at > that moment. > > --WjW > > ps: dmesg, config, etc.... at: > http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS > ps2: upgrading to the most recent 9.1 > _______________________________________________ > freebsd-stable at freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org" >===============================================This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337 or return the E.mail to postmaster at multiplay.co.uk.