freebsd stable - Oct 2012 - 9.1-RC2 ixgbe lagg problems

I'm testing out a networking configuration that creates a lagg1
interface that uses lacp with the ix0 and ix1 interfaces. The lagg1
interface I've set up always just reports:
laggport: ix1 flags=18<COLLECTING,DISTRIBUTING>
laggport: ix0 flags=18<COLLECTING,DISTRIBUTING>

Missing the ACTIVE flag that working lagg interfaces report.

The built in ixgbe driver is at version 2.4.8 in the 9.1-RC2 release I
upgraded to. The problem is very similar to this blog post:
http://christopher-technicalmusings.blogspot.com/2012/03/freebsd-90-and-intel-x520s-ixgbe-2311.html

and this mailing list thread:
http://comments.gmane.org/gmane.os.freebsd.stable/79650

I've tried the 2.4.4 driver from Intel's site, but it still has the
same problems. Is a lagg using lacp with the ix interfaces working for
anyone else?

Thanks

In article
<CAKVzWmwu2MOUq7H5xA1AQXdOMTMLJ6fG98Trsd5xmLfpCp5RbA at mail.gmail.com>,
wynnwilkes at gmail.com writes:
>I've tried the 2.4.4 driver from Intel's site, but it still has the
>same problems. Is a lagg using lacp with the ix interfaces working for
>anyone else?
You bet.

lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 9120
       
options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
        ether 04:7d:7b:a5:88:f0
        inet 128.30.3.34 netmask 0xffffff00 broadcast 128.30.3.255
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: active
        laggproto lacp lagghash l2,l3,l4
        laggport: ix1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
        laggport: ix0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>

Configured with:

cloned_interfaces="lagg0"
ifconfig_ix0="mtu 9120 up"
ifconfig_ix1="mtu 9120 up"
ifconfig_lagg0="laggproto lacp laggport ix0 laggport ix1"
ipv4_addrs_lagg0="128.30.x.x/24"

-GAWollman