Hi All,
I have a new Intel DH77DF mini-ITX motherboard with a Core i5 3550 CPU and am
having trouble getting X to run. This is on a 9-STABLE system just updated
today via cvsup. There appear to be two obvious problems: the first is that X
will no longer start (it used to with about a two week older 9-stable build);
and the second is that once I attempt to start X I seem to lose the console.
I'm left with a blue screen and am unable to switch to any other console
(neither Alt-Fx nor Ctl-Alt-Fx do anything). The system is, however, still
running as I can login via the network.
My 'uname -a' output is this:
FreeBSD yoda 9.0-STABLE FreeBSD 9.0-STABLE #4: Fri May 25 20:36:02 CDT 2012
bob@yoda:/usr/obj/usr/src/sys/YODA amd64
I have attached my dmesg output, a copy of my xorg.conf file, and the output
of 'pciconf -vl'.
Anyone have any idea of what's going wrong, or what I can do to get X to
work
on this system?
Thanks,
Bob
--
Bob Willcox The right half of the brain controls the left half
bob@immure.com of the body. This means that only left handed people
Austin, TX are in their right mind.
-------------- next part --------------
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #4: Fri May 25 20:36:02 CDT 2012
bob@yoda:/usr/obj/usr/src/sys/YODA amd64
CPU: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (3292.59-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a
Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8144031744 (7766 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq
16 at device 20.0 on pci0
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf080-0xf09f mem
0xf7d00000-0xf7d1ffff,0xf7d39000-0xf7d39fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: e8:40:f2:0b:45:53
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7d38000-0xf7d383ff irq
16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <1394 Open Host Controller Interface> port 0xe000-0xe0ff mem
0xf7c00000-0xf7c007ff irq 19 at device 0.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 e0:cb:4e:00:00:0f:c7:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xd9d44000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: e2:cb:4e:0f:c7:bc
fwe0: Ethernet address: e2:cb:4e:0f:c7:bc
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: e0:cb:4e:00:00:0f:c7:bc @ 0xfffe00000000, S400, maxrec
2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7d37000-0xf7d373ff irq
23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port
0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem
0xf7d36000-0xf7d367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <Logitech> at usbus1
uhub5: <Logitech Logitech BT Mini-Receiver, class 9/0, rev 2.00/49.00, addr
3> on usbus1
uhub5: 3 ports with 1 removable, bus powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HDS723020BLA642 MN6OA800> ATA-8 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 12861664 Hz quality 1000
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST BD-RE WH12LS39 1.00> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
Root mount waiting for: usbus1
ugen1.4: <Logitech> at usbus1
ukbd0: <Logitech Logitech BT Mini-Receiver, class 0/0, rev 2.00/49.00, addr
4> on usbus1
kbd2 at ukbd0
ugen1.5: <Logitech> at usbus1
ums0: <Logitech Logitech BT Mini-Receiver, class 0/0, rev 2.00/49.00, addr
5> on usbus1
ums0: 14 buttons and [XYZT] coordinates ID=2
ums0: 8 buttons and [XYZT] coordinates ID=5
Root mount waiting for: usbus1
ugen1.6: <vendor 0x17ef> at usbus1
ukbd1: <vendor 0x17ef Lenovo Multimedia Remote with Keyboard N5902, class
0/0, rev 2.00/0.01, addr 6> on usbus1
kbd3 at ukbd1
ums1: <vendor 0x17ef Lenovo Multimedia Remote with Keyboard N5902, class 0/0,
rev 2.00/0.01, addr 6> on usbus1
ums1: 5 buttons and [XYZT] coordinates ID=1
Trying to mount root from ufs:/dev/ada0p2 [rw]...
em0: link state changed to UP
oss_hdaudio: HDA codec 0x10ec0899 not known yet
oss_hdaudio: HDA codec 0x80862806 not known yet
oss_hdaudio: HDA codec 0x10ec0899 not known yet
oss_hdaudio: HDA codec 0x80862806 not known yet
oss_hdaudio: Too many output endpoints. Endpoint 8 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 0 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 1 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 2 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 3 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 4 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 5 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 6 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 7 ignored.
oss_hdaudio: Too many output endpoints. Endpoint 8 ignored.
oss_hdaudio0: <Intel HD Audio> mem 0xf7d30000-0xf7d33fff irq 22 at device
27.0 on pci0
-------------- next part --------------
hostb0@pci0:0:0:0: class=0x060000 card=0x20348086 chip=0x01508086 rev=0x09
hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x20348086 chip=0x01528086 rev=0x09
hdr=0x00
vendor = 'Intel Corporation'
device = 'Ivy Bridge Graphics Controller'
class = display
subclass = VGA
xhci0@pci0:0:20:0: class=0x0c0330 card=0x20348086 chip=0x1e318086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB xHCI Host Controller'
class = serial bus
subclass = USB
none0@pci0:0:22:0: class=0x078000 card=0x20348086 chip=0x1e3a8086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point MEI Controller'
class = simple comms
em0@pci0:0:25:0: class=0x020000 card=0x20348086 chip=0x15038086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '82579V Gigabit Network Connection'
class = network
subclass = ethernet
ehci0@pci0:0:26:0: class=0x0c0320 card=0x20348086 chip=0x1e2d8086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
oss_hdaudio0@pci0:0:27:0: class=0x040300 card=0x20348086 chip=0x1e208086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point High Definition Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x20348086 chip=0x1e108086 rev=0xc4
hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:7: class=0x060400 card=0x20348086 chip=0x1e1e8086 rev=0xc4
hdr=0x01
vendor = 'Intel Corporation'
device = 'Panther Point PCI Express Root Port 8'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x20348086 chip=0x1e268086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x20348086 chip=0x1e4a8086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x20348086 chip=0x1e028086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point 6 port SATA AHCI Controller'
class = mass storage
subclass = SATA
none1@pci0:0:31:3: class=0x0c0500 card=0x20348086 chip=0x1e228086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'Panther Point SMBus Controller'
class = serial bus
subclass = SMBus
fwohci0@pci0:2:0:0: class=0x0c0010 card=0x20348086 chip=0x34031106 rev=0x01
hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VT6315 Series Firewire Controller'
class = serial bus
subclass = FireWire
-------------- next part --------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AllowEmptyInput" "off"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "Intel Corporation"
BoardName "3rd Gen Core processor Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection