Hi list. Trying to install 9.0 release with a USB stick. I use FreeBSD-9.0-RELEASE-amd64-memstick.img At first the bootup looks promising, but in the end it stops with "Root mount waiting for: usbus2 usbus1 usbus" To single out a bad USB stick I tried FreeBSD-8.3-BETA1-amd64-memstick.img with the same stick and there are no problems. The hardware is an older HP/Compaq DL145-G3, but why toss it in the trash? How can I debug this further? Any hints? Kai. ---- snip ---- SMAP type=01 base=0000000000000000 len=000000000009c000 SMAP type=02 base=000000000009c000 len=0000000000004000 SMAP type=02 base=00000000000ce000 len=0000000000032000 SMAP type=01 base=0000000000100000 len=00000000dbe60000 SMAP type=03 base=00000000dbf60000 len=0000000000007000 SMAP type=04 base=00000000dbf67000 len=0000000000019000 SMAP type=02 base=00000000dbf80000 len=0000000000080000 SMAP type=02 base=00000000e0000000 len=0000000010000000 SMAP type=02 base=00000000fec00000 len=0000000000003000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000fff80000 len=0000000000080000 SMAP type=01 base=0000000100000000 len=0000000124000000 Table 'FACP' at 0xdbf62be7 Table 'SPMI' at 0xdbf66bf5 Table 'SSDT' at 0xdbf66c35 Table 'HPET' at 0xdbf66e7d Table 'SSDT' at 0xdbf66eb5 Table 'MCFG' at 0xdbf66efe Table 'SPCR' at 0xdbf66f3a Table 'APIC' at 0xdbf66f8a APIC: Found table at 0xdbf66f8a APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Table 'FACP' at 0xdbf62be7 Table 'SPMI' at 0xdbf66bf5 Table 'SSDT' at 0xdbf66c35 Table 'HPET' at 0xdbf66e7d Table 'SSDT' at 0xdbf66eb5 Table 'MCFG' at 0xdbf66efe Table 'SPCR' at 0xdbf66f3a Table 'APIC' at 0xdbf66f8a ACPI: No SRAT table found Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813cf000. Calibrating TSC clock ... TSC clock: 2394059007 Hz CPU: Dual-Core AMD Opteron(tm) Processor 2216 HE (2394.06-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f13 Family = f Model = 41 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000001403000 - 0x00000000dbf5ffff, 3669348352 bytes (895837 pages) 0x0000000100000000 - 0x0000000213e45fff, 4628701184 bytes (1130054 pages) avail memory = 8244486144 (7862 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff8000220000 x86bios: EBDA 0x09c000-0x09ffff at 0xfffffe000009c000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf8510 00024 (v02 PTLTD ) ACPI: XSDT 0xdbf62b83 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) ACPI: FACP 0xdbf62be7 00084 (v02 HP TREX 06040000 MSFT 02000001) ACPI: DSDT 0xdbf62c6b 03F8A (v01 HP TREX 06040000 MSFT 02000002) ACPI: FACS 0xdbf6ffc0 00040 ACPI: SPMI 0xdbf66bf5 00040 (v05 HP TREX 06040000 PTL 00000001) ACPI: SSDT 0xdbf66c35 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) ACPI: HPET 0xdbf66e7d 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001) ACPI: SSDT 0xdbf66eb5 00049 (v01 PTLTD SSDT 06040000 AMD 02000001) ACPI: MCFG 0xdbf66efe 0003C (v01 PTLTD MCFG 06040000 AMD 02000001) ACPI: SPCR 0xdbf66f3a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) ACPI: APIC 0xdbf66f8a 00076 (v01 PTLTD APIC 06040000 LTP 00000000) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> kbd: new array size 4 kbd1 at kbdmux0 nfslock: pseudo-device mem: <memory> io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <PTLTD XSDT> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) unknown: I/O range not supported ACPI timer: 0/4 1/3 1/3 1/3 0/4 1/3 0/4 1/3 1/3 0/4 -> 6 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 11 Validation 0 255 N 0 5 7 11 After Disable 0 255 N 0 5 7 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 Validation 0 5 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 7 11 12 14 15 Validation 0 7 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 Validation 0 5 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 11 12 14 15 Validation 0 11 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 pci_link34: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 Validation 0 255 N 0 3 4 5 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 11 12 14 15 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x1166, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0xffffffff (0), periodic hpet0: t1: irqs 0xffffffff (0), periodic hpet0: t2: irqs 0xffffffff (0), periodic Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic1: routing intpin 0 (PCI IRQ 16) to lapic 0 vector 49 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 pcib0: <ACPI Host-PCI bridge> on acpi0 pcib0: decoding 4 range 0-0x3af pcib0: decoding 4 range 0x3e0-0xfff pcib0: decoding 4 range 0x3b0-0x3df pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 4 range 0x1000-0x2fff pcib0: decoding 4 range 0x3000-0xffff pcib0: decoding 3 range 0xdf000000-0xdfcfffff pcib0: decoding 3 range 0xde000000-0xdeffffff pcib0: decoding 3 range 0xfe000000-0xfebfffff pcib0: decoding 3 range 0xfec04000-0xfecfffff pcib0: decoding 3 range 0xfed00400-0xfed07fff pcib0: decoding 3 range 0xfed08008-0xfedfffff pcib0: decoding 3 range 0xfee01000-0xffffffff ACPI: Found matching pin for 0.3.INTA at func 0: 10 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 domain=0, bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 domain=0, bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:2:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:2:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:2:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:2:1 map[20]: type I/O Port, range 32, base 0x1c00, size 4, enabled pcib0: allocated type 4 (0x1c00-0x1c0f) for rid 20 of pci0:0:2:1 found-> vendor=0x1166, dev=0x0234, revid=0x00 domain=0, bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdfc05000, size 12, enabled pcib0: allocated type 3 (0xdfc05000-0xdfc05fff) for rid 10 of pci0:0:3:0 map[14]: type I/O Port, range 32, base 0x1000, size 8, enabled pcib0: allocated type 4 (0x1000-0x10ff) for rid 14 of pci0:0:3:0 pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdfc06000, size 12, enabled pcib0: allocated type 3 (0xdfc06000-0xdfc06fff) for rid 10 of pci0:0:3:1 map[14]: type I/O Port, range 32, base 0x1400, size 8, enabled pcib0: allocated type 4 (0x1400-0x14ff) for rid 14 of pci0:0:3:1 pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU found-> vendor=0x1166, dev=0x0223, revid=0x01 domain=0, bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xdfc07000, size 12, enabled pcib0: allocated type 3 (0xdfc07000-0xdfc07fff) for rid 10 of pci0:0:3:2 map[14]: type I/O Port, range 32, base 0x1800, size 8, enabled pcib0: allocated type 4 (0x1800-0x18ff) for rid 14 of pci0:0:3:2 pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU found-> vendor=0x102b, dev=0x0522, revid=0x02 domain=0, bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=5 powerspec 1 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xde000000, size 24, enabled pcib0: allocated type 3 (0xde000000-0xdeffffff) for rid 10 of pci0:0:4:0 map[14]: type Memory, range 32, base 0xdfc00000, size 14, enabled pcib0: allocated type 3 (0xdfc00000-0xdfc03fff) for rid 14 of pci0:0:4:0 map[18]: type Memory, range 32, base 0xdf000000, size 23, enabled pcib0: allocated type 3 (0xdf000000-0xdf7fffff) for rid 18 of pci0:0:4:0 pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 23 found-> vendor=0x1166, dev=0x0140, revid=0xa2 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 32 found-> vendor=0x1166, dev=0x0142, revid=0xa2 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 32 found-> vendor=0x1166, dev=0x0144, revid=0xa2 domain=0, bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.8.INTA pcib0: slot 8 INTA hardwired to IRQ 32 found-> vendor=0x1166, dev=0x0142, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 32 found-> vendor=0x1166, dev=0x0144, revid=0xa2 domain=0, bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 32 found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1166, dev=0x0104, revid=0xc0 domain=0, bus=1, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0 ata0: <ATA channel 0> on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 ata1: <ATA channel 1> on atapci0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0 ohci0: (New OHCI DeviceId=0x02231166) ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52 usbus0: <OHCI (generic) USB controller> on ohci0 usbus0: bpf attached ohci0: usbpf: Attached ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0 ohci1: (New OHCI DeviceId=0x02231166) usbus1: <OHCI (generic) USB controller> on ohci1 usbus1: bpf attached ohci1: usbpf: Attached ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0 ehci0: (New EHCI DeviceId=0x02231166) usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 usbus2: bpf attached ehci0: usbpf: Attached vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdfc00000-0xdfc03fff,0xdf000000-0xdf7fffff irq 23 at device 4.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0 pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xdfa00000-0xdfafffff) for rid 20 of pcib3 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xdfa00000-0xdfafffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x1000, dev=0x0058, revid=0x08 domain=0, bus=3, slot=0, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 1 message in map 0x14 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:3:0:0 map[14]: type Memory, range 64, base 0xdfa10000, size 14, enabled pcib3: allocated memory range (0xdfa10000-0xdfa13fff) for rid 14 of pci0:3:0:0 map[1c]: type Memory, range 64, base 0xdfa00000, size 16, enabled pcib3: allocated memory range (0xdfa00000-0xdfa0ffff) for rid 1c of pci0:3:0:0 pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 32 mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xdfa10000-0xdfa13fff,0xdfa00000-0xdfa0ffff irq 32 at device 0.0 on pci3 mpt0: attempting to allocate 1 MSI-X vectors (1 supported) msi: routing MSI-X IRQ 256 to local APIC 0 vector 53 mpt0: using IRQ 256 for MSI-X mpt0: MPI Version=1.5.20.0 mpt0: chain depth limited to 34 (from 2040) mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 mpt0: MsgLength=20 IOCNumber = 0 mpt0: IOCFACTS: GlobalCredits=483 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: domain=0, physical bus=6 pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0 pcib0: allocated type 3 (0xdfb00000-0xdfbfffff) for rid 20 of pcib7 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 8 pcib7: memory decode 0xdfb00000-0xdfbfffff pcib7: no prefetched decode pcib7: could not get PCI interrupt routing table for \_SB_.PCI0.EXB4 - AE_NOT_FOUND pci7: <ACPI PCI bus> on pcib7 pci7: domain=0, physical bus=7 found-> vendor=0x1166, dev=0x0103, revid=0xb5 domain=0, bus=7, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pcib7: allocated memory range (0xdfb00000-0xdfbfffff) for rid 20 of pcib8 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: memory decode 0xdfb00000-0xdfbfffff pcib8: no prefetched decode pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x14e4, dev=0x1678, revid=0xa3 domain=0, bus=8, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xdfb10000, size 16, enabled pcib8: allocated memory range (0xdfb10000-0xdfb1ffff) for rid 10 of pci0:8:4:0 map[18]: type Memory, range 64, base 0xdfb00000, size 16, enabled pcib8: allocated memory range (0xdfb00000-0xdfb0ffff) for rid 18 of pci0:8:4:0 pcib8: matched entry for 8.4.INTA pcib8: slot 4 INTA hardwired to IRQ 36 found-> vendor=0x14e4, dev=0x1678, revid=0xa3 domain=0, bus=8, slot=4, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xdfb30000, size 16, enabled pcib8: allocated memory range (0xdfb30000-0xdfb3ffff) for rid 10 of pci0:8:4:1 map[18]: type Memory, range 64, base 0xdfb20000, size 16, enabled pcib8: allocated memory range (0xdfb20000-0xdfb2ffff) for rid 18 of pci0:8:4:1 pcib8: matched entry for 8.4.INTB pcib8: slot 4 INTB hardwired to IRQ 36 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb10000-0xdfb1ffff,0xdfb00000-0xdfb0ffff irq 36 at device 4.0 on pci8 bge0: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 54 bge0: using IRQ 257 for MSI bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X miibus0: <MII bus> on bge0 brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: OUI 0x001018, model 0x0034, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:18:71:87:0f:ac bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb30000-0xdfb3ffff,0xdfb20000-0xdfb2ffff irq 36 at device 4.1 on pci8 bge1: attempting to allocate 1 MSI vectors (8 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 55 bge1: using IRQ 258 for MSI bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X miibus1: <MII bus> on bge1 brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: OUI 0x001018, model 0x0034, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:18:71:87:64:f6 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 56 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57 Event timer "i8254" frequency 1193182 Hz quality 100 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 uart0: fast interrupt uart0: console (9600,n,8,1) acpi0: wakeup code va 0xffffff8233373000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices powernow0: <PowerNow! K8> on cpu0 powernow1: <PowerNow! K8> on cpu1 Device configuration finished. procfs registered Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ugen0.1: <0x1166> at usbus0 uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x1166> at usbus1 uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <0x1166> at usbus2 uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 pass0 at mpt0 bus 0 scbus2 target 17 lun 0 pass0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device pass0: Serial Number 3QQ254BL000090107KK2 pass0: 300.000MB/s transfers pass0: Command Queueing enabled pass1 at mpt0 bus 0 scbus2 target 18 lun 0 pass1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device pass1: Serial Number 3QQ25C8600009010SDER pass1: 300.000MB/s transfers pass1: Command Queueing enabled da0 at mpt0 bus 0 scbus2 target 17 lun 0 da0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device da0: Serial Number 3QQ254BL000090107KK2 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) da1 at mpt0 bus 0 scbus2 target 18 lun 0 da1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device da1: Serial Number 3QQ25C8600009010SDER da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 TSC timecounter discards lower 8 bit(s) GEOM: new disk da0 Timecounter "TSC-low" frequency 9351792 Hz quality -100 GEOM: new disk da1 Root mount waiting for: usbus2 usbus1 usbus0
You may want to try playing around with BIOS settings regarding USB. Sean On Fri, 2012-03-02 at 13:01 -0800, Kai Gallasch wrote:> Hi list. > > Trying to install 9.0 release with a USB stick. > I use FreeBSD-9.0-RELEASE-amd64-memstick.img > > At first the bootup looks promising, but in the end it stops with "Root mount waiting for: usbus2 usbus1 usbus" > > To single out a bad USB stick I tried FreeBSD-8.3-BETA1-amd64-memstick.img with the same stick and there are no problems. > > The hardware is an older HP/Compaq DL145-G3, but why toss it in the trash? > > How can I debug this further? > Any hints? > > Kai. > > > ---- snip ---- > > SMAP type=01 base=0000000000000000 len=000000000009c000 > SMAP type=02 base=000000000009c000 len=0000000000004000 > SMAP type=02 base=00000000000ce000 len=0000000000032000 > SMAP type=01 base=0000000000100000 len=00000000dbe60000 > SMAP type=03 base=00000000dbf60000 len=0000000000007000 > SMAP type=04 base=00000000dbf67000 len=0000000000019000 > SMAP type=02 base=00000000dbf80000 len=0000000000080000 > SMAP type=02 base=00000000e0000000 len=0000000010000000 > SMAP type=02 base=00000000fec00000 len=0000000000003000 > SMAP type=02 base=00000000fee00000 len=0000000000001000 > SMAP type=02 base=00000000fff80000 len=0000000000080000 > SMAP type=01 base=0000000100000000 len=0000000124000000 > Table 'FACP' at 0xdbf62be7 > Table 'SPMI' at 0xdbf66bf5 > Table 'SSDT' at 0xdbf66c35 > Table 'HPET' at 0xdbf66e7d > Table 'SSDT' at 0xdbf66eb5 > Table 'MCFG' at 0xdbf66efe > Table 'SPCR' at 0xdbf66f3a > Table 'APIC' at 0xdbf66f8a > APIC: Found table at 0xdbf66f8a > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled > SMP: Added CPU 1 (AP) > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012 > root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > Table 'FACP' at 0xdbf62be7 > Table 'SPMI' at 0xdbf66bf5 > Table 'SSDT' at 0xdbf66c35 > Table 'HPET' at 0xdbf66e7d > Table 'SSDT' at 0xdbf66eb5 > Table 'MCFG' at 0xdbf66efe > Table 'SPCR' at 0xdbf66f3a > Table 'APIC' at 0xdbf66f8a > ACPI: No SRAT table found > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813cf000. > Calibrating TSC clock ... TSC clock: 2394059007 Hz > CPU: Dual-Core AMD Opteron(tm) Processor 2216 HE (2394.06-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x40f13 Family = f Model = 41 Stepping = 3 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> > AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> > L1 2MB data TLB: 8 entries, fully associative > L1 2MB instruction TLB: 8 entries, fully associative > L1 4KB data TLB: 32 entries, fully associative > L1 4KB instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 2MB unified TLB: 0 entries, disabled/not present > L2 4KB data TLB: 512 entries, 4-way associative > L2 4KB instruction TLB: 512 entries, 4-way associative > L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative > real memory = 8589934592 (8192 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages) > 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) > 0x0000000001403000 - 0x00000000dbf5ffff, 3669348352 bytes (895837 pages) > 0x0000000100000000 - 0x0000000213e45fff, 4628701184 bytes (1130054 pages) > avail memory = 8244486144 (7862 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > INTR: Adding local APIC 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 > x86bios: SSEG 0x001000-0x001fff at 0xffffff8000220000 > x86bios: EBDA 0x09c000-0x09ffff at 0xfffffe000009c000 > x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > ULE: setup cpu 0 > ULE: setup cpu 1 > ACPI: RSDP 0xf8510 00024 (v02 PTLTD ) > ACPI: XSDT 0xdbf62b83 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) > ACPI: FACP 0xdbf62be7 00084 (v02 HP TREX 06040000 MSFT 02000001) > ACPI: DSDT 0xdbf62c6b 03F8A (v01 HP TREX 06040000 MSFT 02000002) > ACPI: FACS 0xdbf6ffc0 00040 > ACPI: SPMI 0xdbf66bf5 00040 (v05 HP TREX 06040000 PTL 00000001) > ACPI: SSDT 0xdbf66c35 00248 (v01 PTLTD POWERNOW 06040000 LTP 00000001) > ACPI: HPET 0xdbf66e7d 00038 (v01 BRCM EXPLOSN 06040000 BRCM 02000001) > ACPI: SSDT 0xdbf66eb5 00049 (v01 PTLTD SSDT 06040000 AMD 02000001) > ACPI: MCFG 0xdbf66efe 0003C (v01 PTLTD MCFG 06040000 AMD 02000001) > ACPI: SPCR 0xdbf66f3a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) > ACPI: APIC 0xdbf66f8a 00076 (v01 PTLTD APIC 06040000 LTP 00000000) > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 > MADT: Found IO APIC ID 4, Interrupt 32 at 0xfec02000 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0: intpin 9 polarity: low > ioapic0: intpin 9 trigger: level > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] > feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 > wlan: <802.11 Link Layer> > random: <entropy source, Software, Yarrow> > kbd: new array size 4 > kbd1 at kbdmux0 > nfslock: pseudo-device > mem: <memory> > io: <I/O> > null: <null device, zero device> > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 > acpi0: <PTLTD XSDT> on motherboard > PCIe: Memory Mapped configuration base @ 0xe0000000 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > acpi0: Power Button (fixed) > unknown: I/O range not supported > ACPI timer: 0/4 1/3 1/3 1/3 0/4 1/3 0/4 1/3 1/3 0/4 -> 6 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu0: switching to generic Cx mode > cpu1: <ACPI CPU> on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 10 11 > Validation 0 10 N 0 10 11 > After Disable 0 255 N 0 10 11 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 10 11 > Validation 0 255 N 0 10 11 > After Disable 0 255 N 0 10 11 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 11 > Validation 0 255 N 0 5 7 11 > After Disable 0 255 N 0 5 7 11 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link8: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link9: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link10: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 > Validation 0 5 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link11: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link12: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link13: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link14: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link15: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link16: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link17: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link18: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link19: Index IRQ Rtd Ref IRQs > Initial Probe 0 7 N 0 3 4 5 7 11 12 14 15 > Validation 0 7 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link20: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link21: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link22: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link23: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 7 11 12 14 15 > Validation 0 5 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link24: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link25: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link26: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link27: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link28: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link29: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link30: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link31: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link32: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link33: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 7 11 12 14 15 > Validation 0 11 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > pci_link34: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 11 12 14 15 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > hpet0: vendor 0x1166, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route > hpet0: t0: irqs 0xffffffff (0), periodic > hpet0: t1: irqs 0xffffffff (0), periodic > hpet0: t2: irqs 0xffffffff (0), periodic > Timecounter "HPET" frequency 14318180 Hz quality 950 > ioapic1: routing intpin 0 (PCI IRQ 16) to lapic 0 vector 49 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 450 > Event timer "HPET2" frequency 14318180 Hz quality 450 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pcib0: decoding 4 range 0-0x3af > pcib0: decoding 4 range 0x3e0-0xfff > pcib0: decoding 4 range 0x3b0-0x3df > pcib0: decoding 3 range 0xa0000-0xbffff > pcib0: decoding 4 range 0x1000-0x2fff > pcib0: decoding 4 range 0x3000-0xffff > pcib0: decoding 3 range 0xdf000000-0xdfcfffff > pcib0: decoding 3 range 0xde000000-0xdeffffff > pcib0: decoding 3 range 0xfe000000-0xfebfffff > pcib0: decoding 3 range 0xfec04000-0xfecfffff > pcib0: decoding 3 range 0xfed00400-0xfed07fff > pcib0: decoding 3 range 0xfed08008-0xfedfffff > pcib0: decoding 3 range 0xfee01000-0xffffffff > ACPI: Found matching pin for 0.3.INTA at func 0: 10 > pci0: <ACPI PCI bus> on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x1166, dev=0x0036, revid=0x00 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0205, revid=0x00 > domain=0, bus=0, slot=2, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0214, revid=0x00 > domain=0, bus=0, slot=2, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=1 > cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:2:1 > pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:2:1 > pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:2:1 > pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:2:1 > map[20]: type I/O Port, range 32, base 0x1c00, size 4, enabled > pcib0: allocated type 4 (0x1c00-0x1c0f) for rid 20 of pci0:0:2:1 > found-> vendor=0x1166, dev=0x0234, revid=0x00 > domain=0, bus=0, slot=2, func=2 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0223, revid=0x01 > domain=0, bus=0, slot=3, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdfc05000, size 12, enabled > pcib0: allocated type 3 (0xdfc05000-0xdfc05fff) for rid 10 of pci0:0:3:0 > map[14]: type I/O Port, range 32, base 0x1000, size 8, enabled > pcib0: allocated type 4 (0x1000-0x10ff) for rid 14 of pci0:0:3:0 > pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) > ioapic0: Changing trigger for pin 10 to level > ioapic0: Changing polarity for pin 10 to low > pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU > found-> vendor=0x1166, dev=0x0223, revid=0x01 > domain=0, bus=0, slot=3, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xdfc06000, size 12, enabled > pcib0: allocated type 3 (0xdfc06000-0xdfc06fff) for rid 10 of pci0:0:3:1 > map[14]: type I/O Port, range 32, base 0x1400, size 8, enabled > pcib0: allocated type 4 (0x1400-0x14ff) for rid 14 of pci0:0:3:1 > pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) > pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU > found-> vendor=0x1166, dev=0x0223, revid=0x01 > domain=0, bus=0, slot=3, func=2 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xdfc07000, size 12, enabled > pcib0: allocated type 3 (0xdfc07000-0xdfc07fff) for rid 10 of pci0:0:3:2 > map[14]: type I/O Port, range 32, base 0x1800, size 8, enabled > pcib0: allocated type 4 (0x1800-0x18ff) for rid 14 of pci0:0:3:2 > pcib0: matched entry for 0.3.INTA (src \_SB_.LNKU:0) > pcib0: slot 3 INTA routed to irq 10 via \_SB_.LNKU > found-> vendor=0x102b, dev=0x0522, revid=0x02 > domain=0, bus=0, slot=4, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) > lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) > intpin=a, irq=5 > powerspec 1 supports D0 D3 current D0 > map[10]: type Prefetchable Memory, range 32, base 0xde000000, size 24, enabled > pcib0: allocated type 3 (0xde000000-0xdeffffff) for rid 10 of pci0:0:4:0 > map[14]: type Memory, range 32, base 0xdfc00000, size 14, enabled > pcib0: allocated type 3 (0xdfc00000-0xdfc03fff) for rid 14 of pci0:0:4:0 > map[18]: type Memory, range 32, base 0xdf000000, size 23, enabled > pcib0: allocated type 3 (0xdf000000-0xdf7fffff) for rid 18 of pci0:0:4:0 > pcib0: matched entry for 0.4.INTA > pcib0: slot 4 INTA hardwired to IRQ 23 > found-> vendor=0x1166, dev=0x0140, revid=0xa2 > domain=0, bus=0, slot=6, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > pcib0: matched entry for 0.6.INTA > pcib0: slot 6 INTA hardwired to IRQ 32 > found-> vendor=0x1166, dev=0x0142, revid=0xa2 > domain=0, bus=0, slot=7, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > pcib0: matched entry for 0.7.INTA > pcib0: slot 7 INTA hardwired to IRQ 32 > found-> vendor=0x1166, dev=0x0144, revid=0xa2 > domain=0, bus=0, slot=8, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > pcib0: matched entry for 0.8.INTA > pcib0: slot 8 INTA hardwired to IRQ 32 > found-> vendor=0x1166, dev=0x0142, revid=0xa2 > domain=0, bus=0, slot=9, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > pcib0: matched entry for 0.9.INTA > pcib0: slot 9 INTA hardwired to IRQ 32 > found-> vendor=0x1166, dev=0x0144, revid=0xa2 > domain=0, bus=0, slot=10, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 2 messages, 64 bit > pcib0: matched entry for 0.10.INTA > pcib0: slot 10 INTA hardwired to IRQ 32 > found-> vendor=0x1022, dev=0x1100, revid=0x00 > domain=0, bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > domain=0, bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > domain=0, bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > domain=0, bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 2 > pcib1: no prefetched decode > pci1: <ACPI PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x1166, dev=0x0104, revid=0xc0 > domain=0, bus=1, slot=13, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) > pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: no prefetched decode > pci2: <ACPI PCI bus> on pcib2 > pci2: domain=0, physical bus=2 > atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 2.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 > ata1: <ATA channel 1> on atapci0 > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 > isab0: <PCI-ISA bridge> at device 2.2 on pci0 > isa0: <ISA bus> on isab0 > ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xdfc05000-0xdfc05fff irq 10 at device 3.0 on pci0 > ohci0: (New OHCI DeviceId=0x02231166) > ioapic0: routing intpin 10 (ISA IRQ 10) to lapic 0 vector 52 > usbus0: <OHCI (generic) USB controller> on ohci0 > usbus0: bpf attached > ohci0: usbpf: Attached > ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xdfc06000-0xdfc06fff irq 10 at device 3.1 on pci0 > ohci1: (New OHCI DeviceId=0x02231166) > usbus1: <OHCI (generic) USB controller> on ohci1 > usbus1: bpf attached > ohci1: usbpf: Attached > ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xdfc07000-0xdfc07fff irq 10 at device 3.2 on pci0 > ehci0: (New EHCI DeviceId=0x02231166) > usbus2: EHCI version 1.0 > usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 > usbus2: bpf attached > ehci0: usbpf: Attached > vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdfc00000-0xdfc03fff,0xdf000000-0xdf7fffff irq 23 at device 4.0 on pci0 > pcib3: <ACPI PCI-PCI bridge> irq 32 at device 6.0 on pci0 > pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib3 > pcib0: allocated type 3 (0xdfa00000-0xdfafffff) for rid 20 of pcib3 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0x2000-0x2fff > pcib3: memory decode 0xdfa00000-0xdfafffff > pcib3: no prefetched decode > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=0, physical bus=3 > found-> vendor=0x1000, dev=0x0058, revid=0x08 > domain=0, bus=3, slot=0, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=7 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 1 message in map 0x14 > map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled > pcib3: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:3:0:0 > map[14]: type Memory, range 64, base 0xdfa10000, size 14, enabled > pcib3: allocated memory range (0xdfa10000-0xdfa13fff) for rid 14 of pci0:3:0:0 > map[1c]: type Memory, range 64, base 0xdfa00000, size 16, enabled > pcib3: allocated memory range (0xdfa00000-0xdfa0ffff) for rid 1c of pci0:3:0:0 > pcib3: matched entry for 3.0.INTA > pcib3: slot 0 INTA hardwired to IRQ 32 > mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xdfa10000-0xdfa13fff,0xdfa00000-0xdfa0ffff irq 32 at device 0.0 on pci3 > mpt0: attempting to allocate 1 MSI-X vectors (1 supported) > msi: routing MSI-X IRQ 256 to local APIC 0 vector 53 > mpt0: using IRQ 256 for MSI-X > mpt0: MPI Version=1.5.20.0 > mpt0: chain depth limited to 34 (from 2040) > mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 > mpt0: MsgLength=20 IOCNumber = 0 > mpt0: IOCFACTS: GlobalCredits=483 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 > mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 > mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). > mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). > pcib4: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 > pcib4: domain 0 > pcib4: secondary bus 4 > pcib4: subordinate bus 4 > pcib4: no prefetched decode > pci4: <ACPI PCI bus> on pcib4 > pci4: domain=0, physical bus=4 > pcib5: <ACPI PCI-PCI bridge> irq 32 at device 8.0 on pci0 > pcib5: domain 0 > pcib5: secondary bus 5 > pcib5: subordinate bus 5 > pcib5: no prefetched decode > pci5: <ACPI PCI bus> on pcib5 > pci5: domain=0, physical bus=5 > pcib6: <ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 > pcib6: domain 0 > pcib6: secondary bus 6 > pcib6: subordinate bus 6 > pcib6: no prefetched decode > pci6: <ACPI PCI bus> on pcib6 > pci6: domain=0, physical bus=6 > pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0 > pcib0: allocated type 3 (0xdfb00000-0xdfbfffff) for rid 20 of pcib7 > pcib7: domain 0 > pcib7: secondary bus 7 > pcib7: subordinate bus 8 > pcib7: memory decode 0xdfb00000-0xdfbfffff > pcib7: no prefetched decode > pcib7: could not get PCI interrupt routing table for \_SB_.PCI0.EXB4 - AE_NOT_FOUND > pci7: <ACPI PCI bus> on pcib7 > pci7: domain=0, physical bus=7 > found-> vendor=0x1166, dev=0x0103, revid=0xb5 > domain=0, bus=7, slot=0, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 > pcib7: allocated memory range (0xdfb00000-0xdfbfffff) for rid 20 of pcib8 > pcib8: domain 0 > pcib8: secondary bus 8 > pcib8: subordinate bus 8 > pcib8: memory decode 0xdfb00000-0xdfbfffff > pcib8: no prefetched decode > pci8: <ACPI PCI bus> on pcib8 > pci8: domain=0, physical bus=8 > found-> vendor=0x14e4, dev=0x1678, revid=0xa3 > domain=0, bus=8, slot=4, func=0 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xdfb10000, size 16, enabled > pcib8: allocated memory range (0xdfb10000-0xdfb1ffff) for rid 10 of pci0:8:4:0 > map[18]: type Memory, range 64, base 0xdfb00000, size 16, enabled > pcib8: allocated memory range (0xdfb00000-0xdfb0ffff) for rid 18 of pci0:8:4:0 > pcib8: matched entry for 8.4.INTA > pcib8: slot 4 INTA hardwired to IRQ 36 > found-> vendor=0x14e4, dev=0x1678, revid=0xa3 > domain=0, bus=8, slot=4, func=1 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=b, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xdfb30000, size 16, enabled > pcib8: allocated memory range (0xdfb30000-0xdfb3ffff) for rid 10 of pci0:8:4:1 > map[18]: type Memory, range 64, base 0xdfb20000, size 16, enabled > pcib8: allocated memory range (0xdfb20000-0xdfb2ffff) for rid 18 of pci0:8:4:1 > pcib8: matched entry for 8.4.INTB > pcib8: slot 4 INTB hardwired to IRQ 36 > bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb10000-0xdfb1ffff,0xdfb00000-0xdfb0ffff irq 36 at device 4.0 on pci8 > bge0: attempting to allocate 1 MSI vectors (8 supported) > msi: routing MSI IRQ 257 to local APIC 0 vector 54 > bge0: using IRQ 257 for MSI > bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X > miibus0: <MII bus> on bge0 > brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0 > brgphy0: OUI 0x001018, model 0x0034, rev. 0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge0: bpf attached > bge0: Ethernet address: 00:18:71:87:0f:ac > bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem 0xdfb30000-0xdfb3ffff,0xdfb20000-0xdfb2ffff irq 36 at device 4.1 on pci8 > bge1: attempting to allocate 1 MSI vectors (8 supported) > msi: routing MSI IRQ 258 to local APIC 0 vector 55 > bge1: using IRQ 258 for MSI > bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X > miibus1: <MII bus> on bge1 > brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1 > brgphy1: OUI 0x001018, model 0x0034, rev. 0 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge1: bpf attached > bge1: Ethernet address: 00:18:71:87:64:f6 > atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 > atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) > ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 56 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57 > Event timer "i8254" frequency 1193182 Hz quality 100 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0xffffffff (1) > kbdc: RESET_KBD return code:00fe > kbdc: RESET_KBD return code:00fe > kbdc: RESET_KBD return code:00fe > kbdc: DIAGNOSE status:0055 > kbdc: TEST_KBD_PORT status:0000 > atkbd: failed to reset the keyboard. > kbd0 at atkbd0 > kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 > uart0: fast interrupt > uart0: console (9600,n,8,1) > acpi0: wakeup code va 0xffffff8233373000 pa 0x4000 > ex_isa_identify() > ahc_isa_probe 0: ioport 0xc00 alloc failed > ahc_isa_probe 1: ioport 0x1c00 alloc failed > ahc_isa_probe 2: ioport 0x2c00 alloc failed > ahc_isa_probe 3: ioport 0x3c00 alloc failed > ahc_isa_probe 4: ioport 0x4c00 alloc failed > ahc_isa_probe 5: ioport 0x5c00 alloc failed > ahc_isa_probe 6: ioport 0x6c00 alloc failed > ahc_isa_probe 7: ioport 0x7c00 alloc failed > ahc_isa_probe 8: ioport 0x8c00 alloc failed > ahc_isa_probe 9: ioport 0x9c00 alloc failed > ahc_isa_probe 10: ioport 0xac00 alloc failed > ahc_isa_probe 11: ioport 0xbc00 alloc failed > ahc_isa_probe 12: ioport 0xcc00 alloc failed > ahc_isa_probe 13: ioport 0xdc00 alloc failed > ahc_isa_probe 14: ioport 0xec00 alloc failed > pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 > isa_probe_children: disabling PnP devices > atkbdc: atkbdc0 already exists; skipping it > atrtc: atrtc0 already exists; skipping it > attimer: attimer0 already exists; skipping it > sc: sc0 already exists; skipping it > uart: uart0 already exists; skipping it > isa_probe_children: probing non-PnP devices > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 > pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 > pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 > pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > ppc0: cannot reserve I/O port range > ppc0: <Parallel port> failed to probe at irq 7 on isa0 > pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 > uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > isa_probe_children: probing PnP devices > powernow0: <PowerNow! K8> on cpu0 > powernow1: <PowerNow! K8> on cpu1 > Device configuration finished. > procfs registered > Timecounters tick every 1.000 msec > vlan: initialized, using hash tables with chaining > lo0: bpf attached > hptrr: no controller detected. > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > ata0: reset tp1 mask=03 ostat0=7f ostat1=7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f > ata0: reset tp2 stat0=ff stat1=ff devices=0x0 > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > ugen0.1: <0x1166> at usbus0 > uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <0x1166> at usbus1 > uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <0x1166> at usbus2 > uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > pass0 at mpt0 bus 0 scbus2 target 17 lun 0 > pass0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device > pass0: Serial Number 3QQ254BL000090107KK2 > pass0: 300.000MB/s transfers > pass0: Command Queueing enabled > pass1 at mpt0 bus 0 scbus2 target 18 lun 0 > pass1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device > pass1: Serial Number 3QQ25C8600009010SDER > pass1: 300.000MB/s transfers > pass1: Command Queueing enabled > da0 at mpt0 bus 0 scbus2 target 17 lun 0 > da0: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device > da0: Serial Number 3QQ254BL000090107KK2 > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) > da1 at mpt0 bus 0 scbus2 target 18 lun 0 > da1: <HP DF0450B8054 HPD5> Fixed Direct Access SCSI-5 device > da1: Serial Number 3QQ25C8600009010SDER > da1: 300.000MB/s transfers > da1: Command Queueing enabled > da1: 429247MB (879097968 512 byte sectors: 255H 63S/T 54721C) > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > TSC timecounter discards lower 8 bit(s) > GEOM: new disk da0 > Timecounter "TSC-low" frequency 9351792 Hz quality -100 > GEOM: new disk da1 > Root mount waiting for: usbus2 usbus1 usbus0 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
In article <719F8E0E-F88D-48E7-B2B7-ABA44B4F4163@free.de>, gallasch@free.de wrote:>Trying to install 9.0 release with a USB stick. >I use FreeBSD-9.0-RELEASE-amd64-memstick.img > >At first the bootup looks promising, but in the end it stops with "Root >mount waiting for: usbus2 usbus1 usbus"The 9.0 memstick image worked (nearly[1]) flawlessly for me, albeit on a different kind of device. It would be really nice if it supported installing directly onto ZFS, though, so that I could avoid doing the install-on-UFS, copy-to-ZFS, pull-boot-drive-and-reboot, reinsert-boot-drive-and-add-to-mirror business. Getting /boot/zfs/zpool.cache is really tricky with the new livefs architecture -- I was able to install on a ZFS pool just fine, but I wasted three hours trying to make it bootable before giving up and doing it the old-fashioned way. (That machine is now being tested as an NFS fileserver[2], getting the snot beat out of it by our most abusive users.) -GAWollman [1] The mps driver in 9.0 is no good, and would not allow the system to boot while even one drive shelf was hooked up. Booting with external drives disconnected, then connecting them in multiuser mode, works fine, although it didn't see one of the SES targets. After cherry-picking the new LSI-supported driver from 9-stable, it boots fine and sees all of the SES devices. [2] wollman@zfsnfs(9)$ uptime 10:17PM up 4 days, 13:07, 2 users, load averages: 8.54, 8.49, 8.72 wollman@zfsnfs(10)$ zpool status export pool: export state: ONLINE scan: scrub canceled on Thu Mar 1 15:22:42 2012 config: NAME STATE READ WRITE CKSUM export ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 multipath/disk2 ONLINE 0 0 0 multipath/disk3 ONLINE 0 0 0 multipath/disk4 ONLINE 0 0 0 multipath/disk5 ONLINE 0 0 0 multipath/disk6 ONLINE 0 0 0 multipath/disk7 ONLINE 0 0 0 multipath/disk8 ONLINE 0 0 0 multipath/disk9 ONLINE 0 0 0 multipath/disk10 ONLINE 0 0 0 multipath/disk11 ONLINE 0 0 0 multipath/disk12 ONLINE 0 0 0 raidz2-1 ONLINE 0 0 0 multipath/disk14 ONLINE 0 0 0 multipath/disk16 ONLINE 0 0 0 multipath/disk17 ONLINE 0 0 0 multipath/disk19 ONLINE 0 0 0 multipath/disk20 ONLINE 0 0 0 multipath/disk21 ONLINE 0 0 0 multipath/disk22 ONLINE 0 0 0 multipath/disk23 ONLINE 0 0 0 multipath/disk24 ONLINE 0 0 0 multipath/disk25 ONLINE 0 0 0 multipath/disk26 ONLINE 0 0 0 raidz2-2 ONLINE 0 0 0 multipath/disk27 ONLINE 0 0 0 multipath/disk28 ONLINE 0 0 0 multipath/disk29 ONLINE 0 0 0 multipath/disk30 ONLINE 0 0 0 multipath/disk31 ONLINE 0 0 0 multipath/disk32 ONLINE 0 0 0 multipath/disk33 ONLINE 0 0 0 multipath/disk34 ONLINE 0 0 0 multipath/disk35 ONLINE 0 0 0 multipath/disk36 ONLINE 0 0 0 multipath/disk37 ONLINE 0 0 0 raidz2-3 ONLINE 0 0 0 multipath/disk38 ONLINE 0 0 0 multipath/disk39 ONLINE 0 0 0 multipath/disk40 ONLINE 0 0 0 multipath/disk41 ONLINE 0 0 0 multipath/disk42 ONLINE 0 0 0 multipath/disk43 ONLINE 0 0 0 multipath/disk44 ONLINE 0 0 0 multipath/disk45 ONLINE 0 0 0 multipath/disk46 ONLINE 0 0 0 multipath/disk47 ONLINE 0 0 0 multipath/disk48 ONLINE 0 0 0 raidz2-4 ONLINE 0 0 0 multipath/disk49 ONLINE 0 0 0 multipath/disk50 ONLINE 0 0 0 multipath/disk52 ONLINE 0 0 0 multipath/disk53 ONLINE 0 0 0 multipath/disk54 ONLINE 0 0 0 multipath/disk55 ONLINE 0 0 0 multipath/disk56 ONLINE 0 0 0 multipath/disk57 ONLINE 0 0 0 multipath/disk58 ONLINE 0 0 0 multipath/disk59 ONLINE 0 0 0 multipath/disk60 ONLINE 0 0 0 raidz2-5 ONLINE 0 0 0 multipath/disk61 ONLINE 0 0 0 multipath/disk62 ONLINE 0 0 0 multipath/disk63 ONLINE 0 0 0 multipath/disk64 ONLINE 0 0 0 multipath/disk65 ONLINE 0 0 0 multipath/disk66 ONLINE 0 0 0 multipath/disk67 ONLINE 0 0 0 multipath/disk68 ONLINE 0 0 0 multipath/disk69 ONLINE 0 0 0 multipath/disk70 ONLINE 0 0 0 multipath/disk71 ONLINE 0 0 0 raidz2-6 ONLINE 0 0 0 multipath/disk72 ONLINE 0 0 0 multipath/disk73 ONLINE 0 0 0 multipath/disk76 ONLINE 0 0 0 multipath/disk77 ONLINE 0 0 0 multipath/disk78 ONLINE 0 0 0 multipath/disk79 ONLINE 0 0 0 multipath/disk80 ONLINE 0 0 0 multipath/disk81 ONLINE 0 0 0 multipath/disk82 ONLINE 0 0 0 multipath/disk83 ONLINE 0 0 0 multipath/disk84 ONLINE 0 0 0 raidz2-7 ONLINE 0 0 0 multipath/disk85 ONLINE 0 0 0 multipath/disk86 ONLINE 0 0 0 multipath/disk87 ONLINE 0 0 0 multipath/disk88 ONLINE 0 0 0 multipath/disk89 ONLINE 0 0 0 multipath/disk90 ONLINE 0 0 0 multipath/disk91 ONLINE 0 0 0 multipath/disk92 ONLINE 0 0 0 multipath/disk93 ONLINE 0 0 0 multipath/disk94 ONLINE 0 0 0 multipath/disk95 ONLINE 0 0 0 logs mirror-8 ONLINE 0 0 0 multipath/ssd0 ONLINE 0 0 0 multipath/ssd2 ONLINE 0 0 0 cache multipath/ssd1 ONLINE 0 0 0 multipath/ssd3 ONLINE 0 0 0 spares multipath/disk13 AVAIL multipath/disk96 AVAIL multipath/disk51 AVAIL errors: No known data errors wollman@zfsnfs(11)$ zpool list export NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT export 160T 5.84T 154T 3% 1.61x ONLINE -
> Hi list. > > Trying to install 9.0 release with a USB stick. > I use FreeBSD-9.0-RELEASE-amd64-memstick.img > > At first the bootup looks promising, but in the end it stops with "Root mount waiting for: usbus2 usbus1 usbus"Just for the records: Someone already had opened up a PR for this. http://www.freebsd.org/cgi/query-pr.cgi?pr=164773 Kai.