Hello,
just FYI that on an 8-way Tyan S3992-E based box, a reboot under
8.2-PRERELEASE (in fact, 8-stable since quite a while) makes the box
freeze, whilst the same thing under -current works OK.
For info the end of console output in both cases as well as dmesg.boot
for -current.
Feel free to contact me for more info or test patches.
Best, Arno
### console log ###
-current :
[root@siamesetwins ~]# reboot
Dec 10 10:12:03 siamesetwins reboot: rebooted by toor
Dec 10 10:12:03 siamesetwins syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
ts_to_ct(1291972331.482314452) = [2010-12-10 09:12:11]
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 3 2 2 1 0 0 0 done
All buffers synced.
Swap device aacd0s1b removed.
Uptime: 7d13h4m34s
bge0: link DOWN
pcib1: wake_prep disabled wake for \_SB_.PCI0.P0P1 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.P0P1.P1P2.SL2X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.P0P1.P1P2.SL3X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB0 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB1 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB2 (S5)
atkbdc0: wake_prep disabled wake for \_SB_.PCI0.SBRG.PS2K (S5)
psmcpnp0: wake_prep disabled wake for \_SB_.PCI0.SBRG.PS2M (S5)
pcib3: wake_prep disabled wake for \_SB_.PCI0.BR14 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.BR14.SL4X (S5)
pcib4: wake_prep disabled wake for \_SB_.PCI0.BR1E (S5)
bge0: wake_prep disabled wake for \_SB_.PCI0.BR1E.GBE1 (S5)
bge1: wake_prep disabled wake for \_SB_.PCI0.BR1E.GBE2 (S5)
pcib5: wake_prep disabled wake for \_SB_.PCI0.BR28 (S5)
pcib8: wake_prep disabled wake for \_SB_.PCI0.BR32 (S5)
pcib9: wake_prep disabled wake for \_SB_.PCI0.BR3C (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.SL1X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.MBE1 (S5)
aac0: shutting down controller...done
Rebooting...
cpu_reset: Stopping other CPUs
8.2-PRE :
# reboot
Dec 10 10:18:21 siamesetwins reboot: rebooted by root
Dec 10 10:18:21 siamesetwins syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...Syncing
disks, vnodes remaining...1 1 0 1 0 0 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
lock order reversal:
1st 0xffffff004b2747e8 ufs (ufs) @ /raid1/bsd/8/src/sys/kern/vfs_mount.c:1204
2nd 0xffffff004b27e308 syncer (syncer) @
/raid1/bsd/8/src/sys/kern/vfs_subr.c:2231
KDB: stack backtrace:
db_trace_self_wrapper() at 0xffffffff801d623a = db_trace_self_wrapper+0x2a
kdb_backtrace() at 0xffffffff802e4d27 = kdb_backtrace+0x37
_witness_debugger() at 0xffffffff802f8645 = _witness_debugger+0x65
witness_checkorder() at 0xffffffff802f98f3 = witness_checkorder+0x833
__lockmgr_args() at 0xffffffff8029cd05 = __lockmgr_args+0xd75
vop_stdlock() at 0xffffffff803386c9 = vop_stdlock+0x39
VOP_LOCK1_APV() at 0xffffffff8054a38b = VOP_LOCK1_APV+0x9b
_vn_lock() at 0xffffffff80355308 = _vn_lock+0x68
vputx() at 0xffffffff8034b595 = vputx+0x315
dounmount() at 0xffffffff80340adb = dounmount+0x2ab
vfs_unmountall() at 0xffffffff8034851c = vfs_unmountall+0x4c
boot() at 0xffffffff802b2fd6 = boot+0x7b6
reboot() at 0xffffffff802b32f8 = reboot+0x68
syscallenter() at 0xffffffff802f190f = syscallenter+0xef
syscall() at 0xffffffff804fc230 = syscall+0x60
Xfast_syscall() at 0xffffffff804e4312 = Xfast_syscall+0xe2
--- syscall (55, FreeBSD ELF64, reboot), rip = 0x80078db3c, rsp =
0x7fffffffecf8, rbp = 0 ---
lock order reversal:
1st 0xffffff004b2747e8 ufs (ufs) @ /raid1/bsd/8/src/sys/kern/vfs_mount.c:1204
2nd 0xffffff0007faf7e8 devfs (devfs) @
/raid1/bsd/8/src/sys/ufs/ffs/ffs_vfsops.c:1244
KDB: stack backtrace:
db_trace_self_wrapper() at 0xffffffff801d623a = db_trace_self_wrapper+0x2a
kdb_backtrace() at 0xffffffff802e4d27 = kdb_backtrace+0x37
_witness_debugger() at 0xffffffff802f8645 = _witness_debugger+0x65
witness_checkorder() at 0xffffffff802f98f3 = witness_checkorder+0x833
__lockmgr_args() at 0xffffffff8029cd05 = __lockmgr_args+0xd75
vop_stdlock() at 0xffffffff803386c9 = vop_stdlock+0x39
VOP_LOCK1_APV() at 0xffffffff8054a38b = VOP_LOCK1_APV+0x9b
_vn_lock() at 0xffffffff80355308 = _vn_lock+0x68
ffs_flushfiles() at 0xffffffff804a29e5 = ffs_flushfiles+0xc5
ffs_unmount() at 0xffffffff804a33ec = ffs_unmount+0x6c
dounmount() at 0xffffffff80340b16 = dounmount+0x2e6
vfs_unmountall() at 0xffffffff8034851c = vfs_unmountall+0x4c
boot() at 0xffffffff802b2fd6 = boot+0x7b6
reboot() at 0xffffffff802b32f8 = reboot+0x68
syscallenter() at 0xffffffff802f190f = syscallenter+0xef
syscall() at 0xffffffff804fc230 = syscall+0x60
Xfast_syscall() at 0xffffffff804e4312 = Xfast_syscall+0xe2
--- syscall (55, FreeBSD ELF64, reboot), rip = 0x80078db3c, rsp =
0x7fffffffecf8, rbp = 0 ---
Swap device aacd0s1b removed.
Uptime: 3m24s
bge0: link DOWN
pcib1: wake_prep disabled wake for \_SB_.PCI0.P0P1 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.P0P1.P1P2.SL2X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.P0P1.P1P2.SL3X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB0 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB1 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.USB2 (S5)
atkbdc0: wake_prep disabled wake for \_SB_.PCI0.SBRG.PS2K (S5)
psmcpnp0: wake_prep disabled wake for \_SB_.PCI0.SBRG.PS2M (S5)
pcib3: wake_prep disabled wake for \_SB_.PCI0.BR14 (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.BR14.SL4X (S5)
pcib4: wake_prep disabled wake for \_SB_.PCI0.BR1E (S5)
bge0: wake_prep disabled wake for \_SB_.PCI0.BR1E.GBE1 (S5)
bge1: wake_prep disabled wake for \_SB_.PCI0.BR1E.GBE2 (S5)
pcib5: wake_prep disabled wake for \_SB_.PCI0.BR28 (S5)
pcib8: wake_prep disabled wake for \_SB_.PCI0.BR32 (S5)
pcib9: wake_prep disabled wake for \_SB_.PCI0.BR3C (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.SL1X (S5)
unknown: wake_prep disabled wake for \_SB_.PCI0.MBE1 (S5)
aac0: shutting down controller...done
Rebooting...
### dmesg ###
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Thu Dec 2 16:36:19 CET 2010
toor@siamesetwins:/zfiles/obj/raid1/bsd/current/src/sys/S3992-E amd64
Table 'FACP' at 0xbfff0290
Table 'APIC' at 0xbfff0390
Table 'MCFG' at 0xbfff04a0
Table 'OEMB' at 0xbfffe040
Table 'SRAT' at 0xbfff3bf0
SRAT: Found table at 0xbfff3bf0
SRAT: Found CPU APIC ID 0 domain 0: enabled
SRAT: Found CPU APIC ID 1 domain 0: enabled
SRAT: Found CPU APIC ID 2 domain 0: enabled
SRAT: Found CPU APIC ID 3 domain 0: enabled
SRAT: Found memory domain 0 addr 0 len a0000: enabled
SRAT: Found memory domain 0 addr 100000 len bff00000: enabled
SRAT: Found memory domain 0 addr 100000000 len 100000000: enabled
SRAT: Found CPU APIC ID 4 domain 1: enabled
SRAT: Found CPU APIC ID 5 domain 1: enabled
SRAT: Found CPU APIC ID 6 domain 1: enabled
SRAT: Found CPU APIC ID 7 domain 1: enabled
SRAT: Found memory domain 1 addr 200000000 len 200000000: enabled
Preloaded elf kernel "/boot/current/kernel" at 0xffffffff80935000.
Preloaded elf obj module "/boot/current/ipfw.ko" at
0xffffffff80935230.
Preloaded elf obj module "/boot/current/libalias.ko" at
0xffffffff80935898.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at
0xffffffff80935f08.
Calibrating TSC clock ... TSC clock: 2194572488 Hz
CPU: Quad-Core AMD Opteron(tm) Processor 2354 (2194.57-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f23 Family = 10 Model = 2
Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD
Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x0000000000960000 - 0x00000000bffeffff, 3211329536 bytes (784016 pages)
0x0000000100000000 - 0x00000003e1ebffff, 12380274688 bytes (3022528 pages)
avail memory = 15493488640 (14775 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <060909 APIC1250>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
SRAT: CPU 0 has memory domain 0
SRAT: CPU 1 has memory domain 0
SRAT: CPU 2 has memory domain 0
SRAT: CPU 3 has memory domain 0
SRAT: CPU 4 has memory domain 1
SRAT: CPU 5 has memory domain 1
SRAT: CPU 6 has memory domain 1
SRAT: CPU 7 has memory domain 1
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000060000
x86bios: EBDA 0x09c000-0x09ffff at 0xfffffe000009c000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
APIC: CPU 4 has ACPI ID 5
APIC: CPU 5 has ACPI ID 6
APIC: CPU 6 has ACPI ID 7
APIC: CPU 7 has ACPI ID 8
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf8f80 00024 (v02 ACPIAM)
ACPI: XSDT 0xbfff0100 00054 (v01 060909 XSDT1250 20090609 MSFT 00000097)
ACPI: FACP 0xbfff0290 000F4 (v03 060909 FACP1250 20090609 MSFT 00000097)
ACPI: DSDT 0xbfff04e0 0370B (v01 0AAAB 0AAAB001 00000001 INTL 02002026)
ACPI: FACS 0xbfffe000 00040
ACPI: APIC 0xbfff0390 00102 (v01 060909 APIC1250 20090609 MSFT 00000097)
ACPI: MCFG 0xbfff04a0 0003C (v01 060909 OEMMCFG 20090609 MSFT 00000097)
ACPI: OEMB 0xbfffe040 00056 (v01 060909 OEMB1250 20090609 MSFT 00000097)
ACPI: SRAT 0xbfff3bf0 00150 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: SSDT 0xbfff3d40 0143C (v01 A M I POWERNOW 00000001 AMD 00000001)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 10, Interrupt 32 at 0xfec02000
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: edge
lapic4: LINT1 polarity: high
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: edge
lapic5: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 9
MADT: Ignoring local NMI routed to ACPI CPU 10
MADT: Ignoring local NMI routed to ACPI CPU 11
MADT: Ignoring local NMI routed to ACPI CPU 12
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
acpi0: <060909 XSDT1250> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
ACPI timer: 0/4 0/4 0/4 0/4225 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 7 9 11 12 14 15
Validation 0 9 N 0 3 4 5 7 9 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 7 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 9 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 9 11 12 14 15
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10
Validation 0 10 N 0 10
After Disable 0 255 N 0 10
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
domain=0, bus=0, slot=2, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
domain=0, bus=0, slot=2, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
domain=0, bus=0, slot=2, func=2
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xff6ec000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xd400, size 8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
ohci early: SMM active, request owner change
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xff6ed000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
ohci early: SMM active, request owner change
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xff6ee000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 10
found-> vendor=0x8086, dev=0x1229, revid=0x10
domain=0, bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xff6eb000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xec00, size 6, enabled
map[18]: type Memory, range 32, base 0xff6a0000, size 17, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x1166, dev=0x0130, revid=0xb0
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x0130, revid=0xb0
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xb0
domain=0, bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xb0
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xb0
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xb0
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x515e, revid=0x02
domain=0, bus=0, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled
map[18]: type Memory, range 32, base 0xff6f0000, size 16, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 17
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=25, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 2
pcib1: I/O decode 0xa000-0xbfff
pcib1: memory decode 0xfef00000-0xfeffffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1166, dev=0x0104, revid=0xc0
domain=0, bus=1, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0016, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x024a, revid=0x00
domain=0, bus=1, slot=14, func=0
class=01-04-05, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled
pcib1: requested I/O range 0xbc00-0xbc07: in range
map[14]: type I/O Port, range 32, base 0xb880, size 2, enabled
pcib1: requested I/O range 0xb880-0xb883: in range
map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled
pcib1: requested I/O range 0xb800-0xb807: in range
map[1c]: type I/O Port, range 32, base 0xb480, size 2, enabled
pcib1: requested I/O range 0xb480-0xb483: in range
map[20]: type I/O Port, range 32, base 0xb400, size 5, enabled
pcib1: requested I/O range 0xb400-0xb41f: in range
map[24]: type Memory, range 32, base 0xfeffe000, size 13, enabled
pcib1: requested memory range 0xfeffe000-0xfeffffff: good
pcib1: matched entry for 1.14.INTA
pcib1: slot 14 INTA hardwired to IRQ 11
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
atapci0: <ServerWorks HT1000 SATA150 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem
0xfeffe000-0xfeffffff irq 11 at device 14.0 on pci1
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 49
ARNO rid = <0>
ata2: <ATA channel 0> on atapci0
ata2: hardware reset ...
ata2: SATA connect timeout status=00000004
ata3: <ATA channel 1> on atapci0
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
ata3: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata3: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata4: <ATA channel 2> on atapci0
ata4: hardware reset ...
ata4: SATA connect time=10ms status=00000113
ata4: reset tp1 mask=01 ostat0=50 ostat1=00
ata4: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata4: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1
ata5: <ATA channel 3> on atapci0
ata5: hardware reset ...
ata5: SATA connect time=10ms status=00000113
ata5: reset tp1 mask=01 ostat0=50 ostat1=00
ata5: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata5: stat0=0xd0 err=0x01 lsb=0x00 msb=0x00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1
atapci1: <ServerWorks HT1000 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=ff stat1=00 devices=0x20000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50
ata1: <ATA channel 1> on atapci1
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 3.0 (no driver attached)
pci0: <serial bus, USB> at device 3.1 (no driver attached)
pci0: <serial bus, USB> at device 3.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0xff000000-0xff0fffff
pcib4: prefetched decode 0xcfd00000-0xcfdfffff
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x14e4, dev=0x166a, revid=0x10
domain=0, bus=4, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xff0d0000, size 16, enabled
pcib4: requested memory range 0xff0d0000-0xff0dffff: good
map[18]: type Memory, range 64, base 0xff0c0000, size 16, enabled
pcib4: requested memory range 0xff0c0000-0xff0cffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 26
found-> vendor=0x14e4, dev=0x166a, revid=0x10
domain=0, bus=4, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xff0f0000, size 16, enabled
pcib4: requested memory range 0xff0f0000-0xff0fffff: good
map[18]: type Memory, range 64, base 0xff0e0000, size 16, enabled
pcib4: requested memory range 0xff0e0000-0xff0effff: good
pcib4: matched entry for 4.4.INTB
pcib4: slot 4 INTB hardwired to IRQ 27
pci4: <network, ethernet> at device 4.0 (no driver attached)
pci4: <network, ethernet> at device 4.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 7
pcib5: I/O decode 0x0-0x0
pcib5: memory decode 0xff100000-0xff5fffff
pcib5: prefetched decode 0xcfe00000-0xcfefffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x0370, revid=0x00
domain=0, bus=5, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x0372, revid=0x00
domain=0, bus=5, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pcib6: domain 0
pcib6: secondary bus 7
pcib6: subordinate bus 7
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xff100000-0xff5fffff
pcib6: prefetched decode 0xcfe00000-0xcfefffff
pci7: <PCI bus> on pcib6
pci7: domain=0, physical bus=7
found-> vendor=0x9005, dev=0x0285, revid=0x00
domain=0, bus=7, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0196, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x01 (250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type Memory, range 64, base 0xff400000, size 21, enabled
pcib6: requested memory range 0xff400000-0xff5fffff: good
pcib5: requested memory range 0xff400000-0xff5fffff: good
pcib5: matched entry for 5.0.INTC
pcib5: slot 0 INTC hardwired to IRQ 28
pcib6: slot 14 INTA is routed to irq 28
aac0: <Adaptec RAID 3405> mem 0xff400000-0xff5fffff irq 28 at device 14.0
on pci7
aac0: Enabling 64-bit address support
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
ioapic1: routing intpin 12 (PCI IRQ 28) to lapic 0 vector 52
ARNO rid = <0>
aac0: XScale 80321 500MHz, 128MB memory (111MB cache, 17MB execution), optional
battery not installed
aac0: Kernel 5.2-0, Build 15323, S/N 14BB38
aac0: Supported
Options=7f1d7d<SNAPSHOT,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD,ADPTINFO,NEWCOMM,ARRAY64BIT,HEATSENSOR>
aac0: Adaptec 3405, aac driver 2.1.9-1
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
aacp2: <SCSI Passthrough Bus> on aac0
pcib7: <PCI-PCI bridge> at device 0.2 on pci5
pcib7: domain 0
pcib7: secondary bus 6
pcib7: subordinate bus 6
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci6: <PCI bus> on pcib7
pci6: domain=0, physical bus=6
pcib8: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib8: domain 0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0x0-0x0
pcib8: no prefetched decode
pci8: <ACPI PCI bus> on pcib8
pci8: domain=0, physical bus=8
pcib9: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib9: domain 0
pcib9: secondary bus 9
pcib9: subordinate bus 9
pcib9: I/O decode 0x0-0x0
pcib9: no prefetched decode
pci9: <ACPI PCI bus> on pcib9
pci9: domain=0, physical bus=9
pcib10: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib10: domain 0
pcib10: secondary bus 10
pcib10: subordinate bus 10
pcib10: I/O decode 0x0-0x0
pcib10: no prefetched decode
pcib10: could not get PCI interrupt routing table for \\_SB_.PCI0.BR46 -
AE_NOT_FOUND
pci10: <ACPI PCI bus> on pcib10
pci10: domain=0, physical bus=10
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xd8000000-0xdfffffff,0xff6f0000-0xff6fffff irq 17 at device 12.0 on pci0
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 53
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment
0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 57
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 58
uart1: fast interrupt
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
hpet0: vendor 0xffff, rev 0xff, 232831Hz 64bit, 32 timers, legacy route
hpet0: t0: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t1: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t2: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t3: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t4: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t5: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t6: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t7: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t8: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t9: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t10: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t11: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t12: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t13: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t14: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t15: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t16: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t17: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t18: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t19: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t20: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t21: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t22: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t23: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t24: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t25: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t26: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t27: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t28: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t29: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t30: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: t31: irqs 0xffffffff (31), MSI, 64bit, periodic
hpet0: 0.000000000: 4294967295 ... 4294967295 = 0
hpet0: time per call: 0 ns
hpet0: HPET never increments, disabling
device_attach: hpet0 attach returned 6
acpi0: wakeup code va 0xffffff83a5395000 pa 0x4000
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcb800-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
linsysfs registered
Timecounter "TSC" frequency 2194572488 Hz quality -100
lapic: Divisor 2, Frequency 99753304 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding
disabled, default to deny, logging disabled
ipfw0: bpf attached
lo0: bpf attached
ata0: Identifying devices: 00020000
ata0: New devices: 00020000
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting UDMA33
acd0: <HL-DT-STDVD-ROM GDR8163B/0L23> DVDROM drive at ata0 as slave
acd0: read 8958KB/s (8958KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: setting UDMA100
ad6: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata3-master UDMA100 SATA
1.5Gb/s
ad6: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: setting UDMA100
ad8: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata4-master UDMA100 SATA
1.5Gb/s
ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: setting UDMA100
ad10: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata5-master UDMA100 SATA
1.5Gb/s
ad10: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
aacd0: <Volume> on aac0
aacd0: 69890MB (143134720 sectors)
GEOM: new disk ad6
GEOM: new disk ad8
GEOM: new disk ad10
GEOM: new disk aacd0
(probe0:aacp0:0:0:0): Data overrun
(probe0:aacp0:0:0:0): Retrying command
(probe0:aacp0:0:0:0): Data overrun
(probe0:aacp0:0:0:0): Retrying command
(probe0:aacp0:0:0:0): Data overrun
(probe0:aacp0:0:0:0): Retrying command
(probe0:aacp0:0:0:0): Data overrun
(probe0:aacp0:0:0:0): Retrying command
(probe0:aacp0:0:0:0): Data overrun
(probe0:aacp0:0:0:0): Error 5, Retries exhausted
pass0 at aacp0 bus 0 scbus0 target 0 lun 0
pass0: <SEAGATE ST373455SS 0002> Fixed Uninstalled SCSI-5 device
pass0: 3.300MB/s transfers
pass0 at aacp0 bus 0 scbus0 target 0 lun 0
pass0: <SEAGATE ST373455SS 0002> Fixed Uninstalled SCSI-5 device
pass0: 0KB/s transfers
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 3 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 4 vector 48
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 5 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 7 vector 48
ioapic1: routing intpin 12 (PCI IRQ 28) to lapic 1 vector 49
Trying to mount root from ufs:/dev/aacd0s1a [rw]...
ct_to_ts([2010-12-02 20:08:00]) = 1291320480.000000000
start_init: trying /sbin/init
ZFS filesystem version 4
ZFS storage pool version 15
tap0: bpf attached
tap0: Ethernet address: 00:bd:f0:2a:00:00
pci0: driver added
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
pci0:0:3:0: reprobing on driver added
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
pci0:0:3:1: reprobing on driver added
found-> vendor=0x1166, dev=0x0223, revid=0x01
domain=0, bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:0:3:2: reprobing on driver added
found-> vendor=0x8086, dev=0x1229, revid=0x10
domain=0, bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:0:4:0: reprobing on driver added
pci1: driver added
pci2: driver added
pci3: driver added
pci4: driver added
found-> vendor=0x14e4, dev=0x166a, revid=0x10
domain=0, bus=4, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=26
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
pci0:4:4:0: reprobing on driver added
pci0:4:4:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008100>
mem 0xff0d0000-0xff0dffff,0xff0c0000-0xff0cffff irq 26 at device 4.0 on pci4
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 2 vector 56
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x00008100; ASIC REV 0x08; CHIP REV 0x81; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0035, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:e0:81:4d:5d:b8
ARNO rid = <1>
found-> vendor=0x14e4, dev=0x166a, revid=0x10
domain=0, bus=4, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=27
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
pci0:4:4:1: reprobing on driver added
pci0:4:4:1: bad VPD cksum, remain 14
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x008100>
mem 0xff0f0000-0xff0fffff,0xff0e0000-0xff0effff irq 27 at device 4.1 on pci4
bge1: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 257 to local APIC 3 vector 56
bge1: using IRQ 257 for MSI
bge1: CHIP ID 0x00008100; ASIC REV 0x08; CHIP REV 0x81; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0035, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: bpf attached
bge1: Ethernet address: 00:e0:81:4d:5d:b9
ARNO rid = <1>
pci5: driver added
pci6: driver added
pci7: driver added
pci8: driver added
pci9: driver added
pci10: driver added
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
amdtemp0: Found 4 cores and 1 sensors.
amdtemp1: <AMD CPU On-Die Thermal Sensors> on hostb9
amdtemp1: Found 4 cores and 1 sensors.