Hello All, What could be the reason for the following failure? ugen2.2: <Sony> at usbus2 umass0: <Sony Sony DSC, class 0/0, rev 1.10/4.50, addr 2> on usbus2 umass0: RBC over CBI; quirks = 0x0000 umass0:1:0:-1: Attached to scbus1 (probe0:umass-sim0:0:0:0): AutoSense failed This occurs on 4 different boxes, all on 8.1-RELEASE. Never happened on previous releases. The camera works on an Ubuntu system. Thank you for any advice, Harald Weis
On Thu, Dec 09, 2010 at 10:35:56PM +0100, Harald Weis wrote:> What could be the reason for the following failure? > > ugen2.2: <Sony> at usbus2 > umass0: <Sony Sony DSC, class 0/0, rev 1.10/4.50, addr 2> on usbus2 > umass0: RBC over CBI; quirks = 0x0000 > umass0:1:0:-1: Attached to scbus1 > (probe0:umass-sim0:0:0:0): AutoSense failed > > This occurs on 4 different boxes, all on 8.1-RELEASE. > Never happened on previous releases. > The camera works on an Ubuntu system.Please try a 8.1-STABLE or 8.2-PRERELEASE snapshot (you can boot the livefs CD or USB memstick image to test) and see if things are different (improved) there. ftp://ftp4.freebsd.org/pub/FreeBSD/snapshots/201011/ 8.x uses a newer/different USB stack than 7.x. Finally, when you say "the camera", are you talking about a webcam, a digital camera with an SD or CF card, or what? "The camera" doesn't really describe the product. The reason I ask: umass is for storage devices; a webcam shouldn't be appearing as a storage device, while a SD/CF/etc. card in a digital camera should. -- | Jeremy Chadwick jdc@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
On Sat, 11 Dec 2010, Harad Weiss wrote> Message: 7 > Date: Fri, 10 Dec 2010 22:59:17 +0100 > From: Harald Weis <hawei@free.fr> > Subject: Re: umass: AutoSense failed > To: freebsd-stable@freebsd.org > Cc: Jeremy Chadwick <freebsd@jdc.parodius.com> > Message-ID: <20101210215917.GA2447@pollux.local.net> > Content-Type: text/plain; charset=us-ascii > > [big snip] > > The AutoSense failure occurs on two desktop computers, whether > motherboard or not, and on three laptops. As I said, all PC's > run 8.1-RELEASE. > What I do not know is whether the Sony DSC (Digital Still Camera) has > worked on 8.0-RELEASE. I didn't use it for some time, so I'm afraid > I never tried it on 8.x. > But I am sure it worked on all earlier releases. > In my original post I have forgotten to mention that I never had any > problems with all sorts of thumbdrives and USB disks. > Fortunately, I can read the 256MB CF memory of the DSC on an Ubuntu > laptop. > Could it possibly be a DSC hardware problem which is ignored by Ubuntu, > but not by FreeBSD?My Sony DSC camera did work under 8.0-RELEASE. It's a model DSC-W35. It's seeing the umass problem now, and has since 8.1-PRERELEASE afair. This fault is the same on i386 or amd64, intel or amd chipsets, USB 1.0 or 2.0, through hubs or straight off the m/b, etc.. I'm keeping a backup box (intel atom / i386) running 7.3-STABLE around specifically to work around the problem. I'd have said something eralier, but I've gotten used to small nits poppping up and then disappearing; this one is dragging along :( sincerest regards, Ross -- Ross Alexander, (780) 675-6823 / (780) 689-0749, rwa@athabascau.ca "Always do right. This will gratify some people, and astound the rest." -- Samuel Clemens __ This communication is intended for the use of the recipient to whom it is addressed, and may contain confidential, personal, and or privileged information. Please contact us immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communications received in error, or subsequent reply, should be deleted or destroyed. ---
On Tue, Dec 14, 2010 at 01:19:29PM -0700, Ross Alexander wrote:> On Sat, 11 Dec 2010, Harad Weiss wrote > > >Message: 7 > >Date: Fri, 10 Dec 2010 22:59:17 +0100 > >From: Harald Weis <hawei@free.fr> > >Subject: Re: umass: AutoSense failed > >To: freebsd-stable@freebsd.org > >Cc: Jeremy Chadwick <freebsd@jdc.parodius.com> > >Message-ID: <20101210215917.GA2447@pollux.local.net> > >Content-Type: text/plain; charset=us-ascii > > > >[big snip] > > > >The AutoSense failure occurs on two desktop computers, whether > >motherboard or not, and on three laptops. As I said, all PC's > >run 8.1-RELEASE. > >What I do not know is whether the Sony DSC (Digital Still Camera) has > >worked on 8.0-RELEASE. I didn't use it for some time, so I'm afraid > >I never tried it on 8.x. > >But I am sure it worked on all earlier releases. > >In my original post I have forgotten to mention that I never had any > >problems with all sorts of thumbdrives and USB disks. > >Fortunately, I can read the 256MB CF memory of the DSC on an Ubuntu > >laptop. > >Could it possibly be a DSC hardware problem which is ignored by Ubuntu, > >but not by FreeBSD? > > My Sony DSC camera did work under 8.0-RELEASE. It's a model DSC-W35. > It's seeing the umass problem now, and has since 8.1-PRERELEASE afair. > > This fault is the same on i386 or amd64, intel or amd chipsets, USB > 1.0 or 2.0, through hubs or straight off the m/b, etc.. I'm keeping a > backup box (intel atom / i386) running 7.3-STABLE around specifically > to work around the problem. I'd have said something eralier, but I've > gotten used to small nits poppping up and then disappearing; this one > is dragging along :(I haven't looked at the List for a while, so I only saw your message yesterday. In the mean time, I've re-learned to work with bootable memory sticks. I've had no luck yet with ReWritable CDs which I need for all boxes but one. Perhaps a blanking problem? Here is the summary of my trials in Fixit mode for my Sony DSC-P10 which is also (at last) the answer to Jeremy's message: 7.2-RELEASE-i386-livefs: OK 8.0-RELEASE-i386-memstick: OK FreeBSD-8.1-STABLE-201009-i386-memstick: AutoSense failed FreeBSD-8.2-PRERELEASE-201012-i386-memstick: booting OK, but "No USB devices found!" <message extract> CAM status: SCSI Status Error SCSI sense: UNIT ATTENTION asc: 28,0 (Not ready to ready change, medium may have changed) da0: 1915MB (3922944 512 byte sectors: 255H 63S/T 244C) GEOM: da0: media size does not match label. </message extract> FreeBSD-9.0-CURRENT-201009-i386-memstick: AutoSense failed Is it not a case for send-pr(1) ? Best regards, Harald