Something I came across today on a RELENG_8 (8.1-PRERELEASE, amd64,
built Jun 8th) system we have:
$ netstat -i -n -d -I em1
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs
Coll Drop
em1 1500 <Link#2> xx:xx:xx:xx:xx:xx 16117371 17 0 11011087
0 0 0
em1 1500 xxxxxxxxx/xx xxxxxxxxxxx 16108452 - - 11024972 -
- -
The input errors are what concerned me. I poked dev.em.1.stats and got
the following:
em1: Excessive collisions = 0
em1: Sequence errors = 0
em1: Defer count = 0
em1: Missed Packets = 17
em1: Receive No Buffers = 0
em1: Receive Length Errors = 0
em1: Receive errors = 0
em1: Crc errors = 0
em1: Alignment errors = 0
em1: Collision/Carrier extension errors = 0
em1: watchdog timeouts = 0
em1: XON Rcvd = 0
em1: XON Xmtd = 0
em1: XOFF Rcvd = 0
em1: XOFF Xmtd = 0
em1: Good Packets Rcvd = 16117349
em1: Good Packets Xmtd = 11046837
em1: TSO Contexts Xmtd = 17609
em1: TSO Contexts Failed = 0
What exactly does "Missed Packets" mean here? How is a packet
"missed"?
Said port on our switch doesn't any sign of problems:
hp2510g# show interfaces 2
Status and Counters - Port Counters for port 2
Name : port2
Link Status : Up
Totals (Since boot or last clear) :
Bytes Rx : 3,548,949,136 Bytes Tx : 2,613,086,119
Unicast Rx : 182,088,023 Unicast Tx : 255,981,685
Bcast/Mcast Rx : 14,674 Bcast/Mcast Tx : 81,852
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Rx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 1457984 Total Tx (bps) : 1494568
Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0
Utilization Rx : 00.04 % Utilization Tx : 00.04 %
Relevant userland and kernel stuff:
$ ifconfig em1
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
ether xx:xx:xx:xx:xx:xx
inet xxxxxxxxxxx netmask xxxxxxxxxx broadcast xxxxxxxxxxx
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
$ netstat -m
2162/1678/3840 mbufs in use (current/cache/total)
2048/1030/3078/25600 mbuf clusters in use (current/cache/total/max)
2048/896 mbuf+clusters out of packet secondary zone in use (current/cache)
0/104/104/12800 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/6400 9k jumbo clusters in use (current/cache/total/max)
0/0/0/3200 16k jumbo clusters in use (current/cache/total/max)
4636K/2895K/7532K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/0/0 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routines
$ vmstat -i
interrupt total rate
irq4: uart0 868 0
irq6: fdc0 1 0
irq23: uhci3 ehci1+ 332 0
cpu0: timer 1818467717 2000
irq256: em0 375532 0
irq257: em1 5004095 5
irq258: ahci0 5879898 6
cpu1: timer 1818466783 2000
cpu3: timer 1818466831 2000
cpu2: timer 1818466828 2000
Total 7285128885 8012
$ dmesg | grep em1
em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3000-0x301f mem
0xd0300000-0xd031ffff irq 17 at device 0.0 on pci15
em1: Using MSI interrupt
em1: [FILTER]
$ pciconf -lvc
em1@pci0:15:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel PRO/1000 PL Network Adaptor (82573L)'
class = network
subclass = ethernet
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
--
| Jeremy Chadwick jdc@parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
On Sat, Jun 19, 2010 at 12:23:44PM -0700, Jeremy Chadwick wrote:> Something I came across today on a RELENG_8 (8.1-PRERELEASE, amd64, > built Jun 8th) system we have: > > $ netstat -i -n -d -I em1 > Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll Drop > em1 1500 <Link#2> xx:xx:xx:xx:xx:xx 16117371 17 0 11011087 0 0 0 > em1 1500 xxxxxxxxx/xx xxxxxxxxxxx 16108452 - - 11024972 - - - > > The input errors are what concerned me. I poked dev.em.1.stats and got > the following: > > em1: Excessive collisions = 0 > em1: Sequence errors = 0 > em1: Defer count = 0 > em1: Missed Packets = 17 > em1: Receive No Buffers = 0 > em1: Receive Length Errors = 0 > em1: Receive errors = 0 > em1: Crc errors = 0 > em1: Alignment errors = 0 > em1: Collision/Carrier extension errors = 0 > em1: watchdog timeouts = 0 > em1: XON Rcvd = 0 > em1: XON Xmtd = 0 > em1: XOFF Rcvd = 0 > em1: XOFF Xmtd = 0 > em1: Good Packets Rcvd = 16117349 > em1: Good Packets Xmtd = 11046837 > em1: TSO Contexts Xmtd = 17609 > em1: TSO Contexts Failed = 0 > > What exactly does "Missed Packets" mean here? How is a packet "missed"?>From Intel's data sheet:MPC (04010h; RC) Counts the number of missed packets. Packets are missed when the receive FIFO has insufficient space to store the incoming packet. This can be caused because of too few buffers allocated, or because there is insufficient bandwidth on the PCI bus. Events setting this counter cause RXO, the Receiver Overrun Interrupt, to be set. This register does not increment if receives are not enabled. These packets are also counted in the Total Packets Received register as well as in Total Octets Received. Driver in HEAD supports detailed hardware MAC counters so that may give you more better idea what's happening here. I vaguely remember I saw this when I perform 64bytes UDP torture test.> Said port on our switch doesn't any sign of problems: > > hp2510g# show interfaces 2 > > Status and Counters - Port Counters for port 2 > > Name : port2 > Link Status : Up > Totals (Since boot or last clear) : > Bytes Rx : 3,548,949,136 Bytes Tx : 2,613,086,119 > Unicast Rx : 182,088,023 Unicast Tx : 255,981,685 > Bcast/Mcast Rx : 14,674 Bcast/Mcast Tx : 81,852 > Errors (Since boot or last clear) : > FCS Rx : 0 Drops Rx : 0 > Alignment Rx : 0 Collisions Tx : 0 > Runts Rx : 0 Late Colln Tx : 0 > Giants Rx : 0 Excessive Colln : 0 > Total Rx Errors : 0 Deferred Tx : 0 > Rates (5 minute weighted average) : > Total Rx (bps) : 1457984 Total Tx (bps) : 1494568 > Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0 > B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0 > Utilization Rx : 00.04 % Utilization Tx : 00.04 % > > Relevant userland and kernel stuff: > > $ ifconfig em1 > em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> > ether xx:xx:xx:xx:xx:xx > inet xxxxxxxxxxx netmask xxxxxxxxxx broadcast xxxxxxxxxxx > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > > $ netstat -m > 2162/1678/3840 mbufs in use (current/cache/total) > 2048/1030/3078/25600 mbuf clusters in use (current/cache/total/max) > 2048/896 mbuf+clusters out of packet secondary zone in use (current/cache) > 0/104/104/12800 4k (page size) jumbo clusters in use (current/cache/total/max) > 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) > 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) > 4636K/2895K/7532K bytes allocated to network (current/cache/total) > 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) > 0/0/0 requests for jumbo clusters denied (4k/9k/16k) > 0/0/0 sfbufs in use (current/peak/max) > 0 requests for sfbufs denied > 0 requests for sfbufs delayed > 0 requests for I/O initiated by sendfile > 0 calls to protocol drain routines > > $ vmstat -i > interrupt total rate > irq4: uart0 868 0 > irq6: fdc0 1 0 > irq23: uhci3 ehci1+ 332 0 > cpu0: timer 1818467717 2000 > irq256: em0 375532 0 > irq257: em1 5004095 5 > irq258: ahci0 5879898 6 > cpu1: timer 1818466783 2000 > cpu3: timer 1818466831 2000 > cpu2: timer 1818466828 2000 > Total 7285128885 8012 > > $ dmesg | grep em1 > em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3000-0x301f mem 0xd0300000-0xd031ffff irq 17 at device 0.0 on pci15 > em1: Using MSI interrupt > em1: [FILTER] > > $ pciconf -lvc > em1@pci0:15:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel PRO/1000 PL Network Adaptor (82573L)' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1) > > -- > | Jeremy Chadwick jdc@parodius.com | > | Parodius Networking http://www.parodius.com/ | > | UNIX Systems Administrator Mountain View, CA, USA | > | Making life hard for others since 1977. PGP: 4BD6C0CB | > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
I do not believe this is a problem, a bit hard to parse the numbers on that netstat, but missed packets will happen when an interface gets lots of traffic. Keep an eye on things though. Thanks, Jack On Sat, Jun 19, 2010 at 12:23 PM, Jeremy Chadwick <freebsd@jdc.parodius.com>wrote:> Something I came across today on a RELENG_8 (8.1-PRERELEASE, amd64, > built Jun 8th) system we have: > > $ netstat -i -n -d -I em1 > Name Mtu Network Address Ipkts Ierrs Idrop Opkts > Oerrs Coll Drop > em1 1500 <Link#2> xx:xx:xx:xx:xx:xx 16117371 17 0 11011087 > 0 0 0 > em1 1500 xxxxxxxxx/xx xxxxxxxxxxx 16108452 - - 11024972 > - - - > > The input errors are what concerned me. I poked dev.em.1.stats and got > the following: > > em1: Excessive collisions = 0 > em1: Sequence errors = 0 > em1: Defer count = 0 > em1: Missed Packets = 17 > em1: Receive No Buffers = 0 > em1: Receive Length Errors = 0 > em1: Receive errors = 0 > em1: Crc errors = 0 > em1: Alignment errors = 0 > em1: Collision/Carrier extension errors = 0 > em1: watchdog timeouts = 0 > em1: XON Rcvd = 0 > em1: XON Xmtd = 0 > em1: XOFF Rcvd = 0 > em1: XOFF Xmtd = 0 > em1: Good Packets Rcvd = 16117349 > em1: Good Packets Xmtd = 11046837 > em1: TSO Contexts Xmtd = 17609 > em1: TSO Contexts Failed = 0 > > What exactly does "Missed Packets" mean here? How is a packet "missed"? > Said port on our switch doesn't any sign of problems: > > hp2510g# show interfaces 2 > > Status and Counters - Port Counters for port 2 > > Name : port2 > Link Status : Up > Totals (Since boot or last clear) : > Bytes Rx : 3,548,949,136 Bytes Tx : 2,613,086,119 > Unicast Rx : 182,088,023 Unicast Tx : 255,981,685 > Bcast/Mcast Rx : 14,674 Bcast/Mcast Tx : 81,852 > Errors (Since boot or last clear) : > FCS Rx : 0 Drops Rx : 0 > Alignment Rx : 0 Collisions Tx : 0 > Runts Rx : 0 Late Colln Tx : 0 > Giants Rx : 0 Excessive Colln : 0 > Total Rx Errors : 0 Deferred Tx : 0 > Rates (5 minute weighted average) : > Total Rx (bps) : 1457984 Total Tx (bps) : 1494568 > Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0 > B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0 > Utilization Rx : 00.04 % Utilization Tx : 00.04 % > > Relevant userland and kernel stuff: > > $ ifconfig em1 > em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC> > ether xx:xx:xx:xx:xx:xx > inet xxxxxxxxxxx netmask xxxxxxxxxx broadcast xxxxxxxxxxx > media: Ethernet autoselect (1000baseT <full-duplex>) > status: active > > $ netstat -m > 2162/1678/3840 mbufs in use (current/cache/total) > 2048/1030/3078/25600 mbuf clusters in use (current/cache/total/max) > 2048/896 mbuf+clusters out of packet secondary zone in use (current/cache) > 0/104/104/12800 4k (page size) jumbo clusters in use > (current/cache/total/max) > 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) > 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) > 4636K/2895K/7532K bytes allocated to network (current/cache/total) > 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) > 0/0/0 requests for jumbo clusters denied (4k/9k/16k) > 0/0/0 sfbufs in use (current/peak/max) > 0 requests for sfbufs denied > 0 requests for sfbufs delayed > 0 requests for I/O initiated by sendfile > 0 calls to protocol drain routines > > $ vmstat -i > interrupt total rate > irq4: uart0 868 0 > irq6: fdc0 1 0 > irq23: uhci3 ehci1+ 332 0 > cpu0: timer 1818467717 2000 > irq256: em0 375532 0 > irq257: em1 5004095 5 > irq258: ahci0 5879898 6 > cpu1: timer 1818466783 2000 > cpu3: timer 1818466831 2000 > cpu2: timer 1818466828 2000 > Total 7285128885 8012 > > $ dmesg | grep em1 > em1: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3000-0x301f mem > 0xd0300000-0xd031ffff irq 17 at device 0.0 on pci15 > em1: Using MSI interrupt > em1: [FILTER] > > $ pciconf -lvc > em1@pci0:15:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Intel PRO/1000 PL Network Adaptor (82573L)' > class = network > subclass = ethernet > cap 01[c8] = powerspec 2 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1) > > -- > | Jeremy Chadwick jdc@parodius.com | > | Parodius Networking http://www.parodius.com/ | > | UNIX Systems Administrator Mountain View, CA, USA | > | Making life hard for others since 1977. PGP: 4BD6C0CB | > >