Hi!
I have FreeBSD 7.3-STABLE on Biostar 945GC-M4 motherboard.
When I boot with custom kernel it fail to boot on ACPI. FreeBSD box
do not respond to any key. But it successfully boots with button 2
from boot menu (without acpi).
Then I try to boot with GENERIC. Success! Ok, I try comment
out one-by-one devices in GENERIC, rebuild and install kernel,
and try to boot. My custom kernel boot fine until I comment
out mpt device in kernel, but it successfully boots without
acpi (button 2 on boot menu). I have no mpt devices in
this box. When I insert "device mpt" back to the kernel it boots
successfully.
Why acpi depends on device mpt? Why this server do not boot without
this device?
# uname -a:
FreeBSD milk 7.3-STABLE FreeBSD 7.3-STABLE #15: Wed Jun 16 13:47:37
EEST 2010 root@milk:/usr/obj/usr/src/sys/milk i386
# dmesg without acpi and with mpt device:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-STABLE #14: Wed Jun 16 12:01:41 EEST 2010
root@milk:/usr/obj/usr/src/sys/milk i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.29-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf33 Family = f Model = 3 Stepping
= 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x41d<SSE3,DTES64,MON,DS_CPL,CNXT-ID>
real memory = 528220160 (503 MB)
avail memory = 507195392 (483 MB)
MPTable: <Intel Lakeport >
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem
0xfe980000-0xfe9fffff,0xe0000000-0xefffffff,0xfe940000-0xfe97ffff irq 16 at
device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
re0: <RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX> port
0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device
0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:30:67:41:c8:ee
re0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 23 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 19 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 18 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 16 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe937c00-0xfe937fff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 16 at device 2.0 on pci3
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:4c:1a:c7:92
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at
device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <INT0800> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 2394285804 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat enabled, rule-based forwarding enabled,
default to accept, logging limited to 100 packets/entry by default
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 38166MB <Seagate ST340014A 8.01> at ata0-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
re0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 0 1 0 0 done
All buffers synced.
## dmesg with acpi and with mpt device:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-STABLE #15: Wed Jun 16 13:47:37 EEST 2010
root@milk:/usr/obj/usr/src/sys/milk i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf33 Family = f Model = 3 Stepping
= 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x41d<SSE3,DTES64,MON,DS_CPL,CNXT-ID>
real memory = 528220160 (503 MB)
avail memory = 507166720 (483 MB)
ACPI APIC Table: <120309 APIC1512>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <120309 RSDT1512> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem
0xfe980000-0xfe9fffff,0xe0000000-0xefffffff,0xfe940000-0xfe97ffff irq 16 at
device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX> port
0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device
0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:30:67:41:c8:ee
re0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 23 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 19 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 18 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 16 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe937c00-0xfe937fff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 16 at device 2.0 on pci3
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:4c:1a:c7:92
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at
device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2394280755 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, nat enabled, rule-based forwarding enabled,
default to accept, logging limited to 100 packets/entry by default
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 38166MB <Seagate ST340014A 8.01> at ata0-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
arp: unknown hardware address format (0x4242)
kernel is:
# grep -vE ^"($|#)" /sys/i386/conf/milk
cpu I686_CPU
ident milk
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
options INCLUDE_CONFIG_FILE # Include this file in kernel
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
device cpufreq
device eisa
device pci
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# output. Adds ~128k to driver.
# output. Adds ~215k to driver.
device mpt # LSI-Logic MPT-Fusion
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc
device agp # support several AGP chipsets
device pmtimer
device miibus # MII bus support
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sk # SysKonnect SK-984x & SK-982x gigabit
Ethernet
device vr # VIA Rhine, Rhine II
device xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
device bpf # Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPFIREWALL_FORWARD #packet destination changes
options IPFIREWALL_NAT #ipfw kernel nat support
options LIBALIAS
options DUMMYNET
--
Olexandr Lystopad