Hi.
I have problem when probing the ciss device. Causing a kernel panic. This
happened when I upgraded from 6.3 to 7.3-stable. Booting the old kernel
works. So something has changed. I am also getting the error on both the
7.3 and the 8.0 install cd's.
The ciss that causing the problem is a Smart Array 6404 and its the addon
card that it faults at. The server disconnect it due to an error. But
since it works on 6.3 it is something that have changed. FreeBSD should
not panic, it should just disable it.
Also I tried to disable the card in the BIOS, but FreeBSD try to probe it
anyway and panic.
This whats comes up on a verbose boot through the ILO remote console.
(typed in manually from a screenshot)
ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem
0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill
ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000
pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an
ioport
ciss2: can't allocate config window
kernel trap 12 with interupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0xf0009bd0
fault code = supervicor write, page not present
instruction pointer = 0x20:0xc08b6e99
stack pointer = 0x28:0xc1420524
frame pointer = 0x28:0xc1420540
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32, gran 1
processor eflags = resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort_
/Bjorn
On Tue, 27 Apr 2010, kama wrote:> > Hi. > > I have problem when probing the ciss device. Causing a kernel panic. This > happened when I upgraded from 6.3 to 7.3-stable. Booting the old kernel > works. So something has changed. I am also getting the error on both the > 7.3 and the 8.0 install cd's. > > The ciss that causing the problem is a Smart Array 6404 and its the addon > card that it faults at. The server disconnect it due to an error. But > since it works on 6.3 it is something that have changed. FreeBSD should > not panic, it should just disable it. > > Also I tried to disable the card in the BIOS, but FreeBSD try to probe it > anyway and panic. > > This whats comes up on a verbose boot through the ILO remote console. > (typed in manually from a screenshot) > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > 0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > ioport > ciss2: can't allocate config window > kernel trap 12 with interupts disabled > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0xf0009bd0 > fault code = supervicor write, page not present > instruction pointer = 0x20:0xc08b6e99 > stack pointer = 0x28:0xc1420524 > frame pointer = 0x28:0xc1420540 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32, gran 1 > processor eflags = resume, IOPL = 0 > current process = 0 (swapper) > trap number = 12 > panic: page fault > cpuid = 0 > Uptime: 1s > Automatic reboot in 15 seconds - press a key on the console to abort_I have now tested with all the different official released versions that are available on the ftps. 6.3 works (was installed on the system) 6.4 works 7.1 panics 7.2 panics 7.3 panics 8.0 panics I dont know what else to test. The server is 1500 km away, so I cant just pop down to the datacenter. ILO is my friend right now and I can only boot on a virtual CD. I have updated all the firmwares to the latest versions to see if that had anything to do with it. /Bjorn
On Tuesday 27 April 2010 9:30:12 am kama wrote:> > Hi. > > I have problem when probing the ciss device. Causing a kernel panic. This > happened when I upgraded from 6.3 to 7.3-stable. Booting the old kernel > works. So something has changed. I am also getting the error on both the > 7.3 and the 8.0 install cd's. > > The ciss that causing the problem is a Smart Array 6404 and its the addon > card that it faults at. The server disconnect it due to an error. But > since it works on 6.3 it is something that have changed. FreeBSD should > not panic, it should just disable it. > > Also I tried to disable the card in the BIOS, but FreeBSD try to probe it > anyway and panic. > > This whats comes up on a verbose boot through the ILO remote console. > (typed in manually from a screenshot) > > ciss2: <HP Smart Array 6400 EM> port 0x6400-0x64ff mem > 0xfdf70000-0xfdf71fff irq 98 at device 5.0 on pcill > ciss2: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdf70000 > pci11: child ciss2 requested type 3 for rid 0, but the BAR says it is an > ioport > ciss2: can't allocate config window > kernel trap 12 with interupts disabledCan you get the ciss2 boot messages from a working 6.x kernel? -- John Baldwin