I have possibly found a bug in FreeBSD RELENG_8 where the system would randomly
grind to a halt between 1 hour and 8 hours uptime. This did not occur in 7.2 on
the same hardware. I see lots of re0: watchdog timeout messages on the console
and then suddenly everything freezes - the keybaord input does not work, I
cannot ssh or open any new TCP connections. Existing connections seem to work
fine and still passes on traffic through the system.
I posted a bug report here:
http://forum.pfsense.org/index.php/topic,24158.msg124878.html
It seems like it is the Realtek onboard adapter in my system. The moment I
disable it in the BIOS (it is an onboard NIC) then the system does not crash
anymore. I added an Intel Pro/1000 NIC and since doing that the machine is
stable again. But if I re-enable the Realtek the system crashes within 8 hours.
Here is some debug output that might help:
# dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Mon Apr 5 12:40:40 EDT 2010
ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8
i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1795.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Family = 6 Model = 16
Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 1073741824 (1024 MB)
avail memory = 1023414272 (976 MB)
ACPI APIC Table: <AAMMII OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0728b70, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0728c30, 0) error 1
ipw_monitor: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0728cf0, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc08f7640, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <AAMMII OEMRSDTA> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem
0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe940000-0xfe97ffff irq 16 at
device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f mem
0xfeae0000-0xfeafffff,0xfea00000-0xfea7ffff,0xfeadc000-0xfeadffff irq 16 at
device 0.0 on pci1
em0: Using MSIX interrupts
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq
23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq
19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq
18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq
16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe937c00-0xfe937fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 18 at device 1.0 on pci3
vr0: Quirks: 0x0
vr0: Revision: 0x86
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: [ITHREAD]
vr1: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem
0xfebff800-0xfebff8ff irq 19 at device 2.0 on pci3
vr1: Quirks: 0x0
vr1: Revision: 0x86
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at
device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1795511421 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB00> at ata0-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad4: 305245MB <WDC WD3200AAJS-41VWA1 58.01D05> at ata2-master UDMA100 SATA
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
pflog0: promiscuous mode enabled
em0: link state changed to UP
vr1: promiscuous mode enabled
vr0: promiscuous mode enabled
vr0: promiscuous mode disabled
vr0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Uptime: 18h2m24s
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Mon Apr 5 12:40:40 EDT 2010
ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8
i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1795.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Family = 6 Model = 16
Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 1073741824 (1024 MB)
avail memory = 1023414272 (976 MB)
ACPI APIC Table: <AAMMII OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0728b70, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0728c30, 0) error 1
ipw_monitor: You need to read the LICENSE file in
/usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0728cf0, 0) error 1
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc08f7640, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <AAMMII OEMRSDTA> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xbc00-0xbc07 mem
0xfe880000-0xfe8fffff,0xd0000000-0xdfffffff,0xfe840000-0xfe87ffff irq 16 at
device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xcc00-0xcc1f mem
0xfe9e0000-0xfe9fffff,0xfe900000-0xfe97ffff,0xfe9dc000-0xfe9dffff irq 16 at
device 0.0 on pci1
em0: Using MSIX interrupts
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX> port
0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x34000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: [FILTER]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xb880-0xb89f irq
23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb800-0xb81f irq
19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb480-0xb49f irq
18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb400-0xb41f irq
16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe837c00-0xfe837fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 18 at device 1.0 on pci3
vr0: Quirks: 0x0
vr0: Revision: 0x86
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: [ITHREAD]
vr1: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem
0xfebff800-0xfebff8ff irq 19 at device 2.0 on pci3
vr1: Quirks: 0x0
vr1: Revision: 0x86
miibus2: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f irq 19 at
device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1795509333 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB00> at ata0-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad4: 305245MB <WDC WD3200AAJS-41VWA1 58.01D05> at ata2-master UDMA100 SATA
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
pflog0: promiscuous mode enabled
em0: link state changed to UP
vr1: promiscuous mode enabled
vr0: promiscuous mode enabled
re0: promiscuous mode enabled
# uname -a
FreeBSD gw.pwnconsulting.za.net 8.0-STABLE FreeBSD 8.0-STABLE #1: Mon Apr 5
12:40:40 EDT 2010
ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8
i386
# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x26241019 chip=0x27708086 rev=0x02
hdr=0x00
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x26241019 chip=0x27728086 rev=0x02
hdr=0x00
class = display
subclass = VGA
none0@pci0:0:27:0: class=0x040300 card=0x29501019 chip=0x27d88086 rev=0x01
hdr=0x00
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x26241019 chip=0x27d08086 rev=0x01
hdr=0x01
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:3: class=0x060400 card=0x26241019 chip=0x27d68086 rev=0x01
hdr=0x01
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x26241019 chip=0x27c88086 rev=0x01
hdr=0x00
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x26241019 chip=0x27c98086 rev=0x01
hdr=0x00
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x26241019 chip=0x27ca8086 rev=0x01
hdr=0x00
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x26241019 chip=0x27cb8086 rev=0x01
hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x26241019 chip=0x27cc8086 rev=0x01
hdr=0x00
class = serial bus
subclass = USB
pcib3@pci0:0:30:0: class=0x060401 card=0x26241019 chip=0x244e8086 rev=0xe1
hdr=0x01
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x26241019 chip=0x27b88086 rev=0x01
hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x26241019 chip=0x27df8086 rev=0x01
hdr=0x00
class = mass storage
subclass = ATA
atapci1@pci0:0:31:2: class=0x01018f card=0x26241019 chip=0x27c08086 rev=0x01
hdr=0x00
class = mass storage
subclass = ATA
none1@pci0:0:31:3: class=0x0c0500 card=0x26241019 chip=0x27da8086 rev=0x01
hdr=0x00
class = serial bus
subclass = SMBus
em0@pci0:1:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 hdr=0x00
class = network
subclass = ethernet
re0@pci0:2:0:0: class=0x020000 card=0x81361019 chip=0x813610ec rev=0x01 hdr=0x00
class = network
subclass = ethernet
vr0@pci0:3:1:0: class=0x020000 card=0x14071186 chip=0x31061106 rev=0x86 hdr=0x00
class = network
subclass = ethernet
vr1@pci0:3:2:0: class=0x020000 card=0x14071186 chip=0x31061106 rev=0x86 hdr=0x00
class = network
subclass = ethernet
Let me know if there are any additional information you need.
Regards,
Waldo