Christof Schulze
2010-Apr-11 17:21 UTC
interrupts may not be functioning with adaptec AHA-2940 on 8-Stable
Hello world,
I am getting this error ahc0: Timedout SCBs already complete. Interrupts may
not be functioning.
on a 8-stable system on amd64. This card used to work in a 32bit 8.0.
From previous posts I found that this might be connected to interrupt code,
but I am not sure this really is the same error. I tried to gather relevant
information below, please let me know if I forgot anything and how I can help
to get this fixed.
I got this while trying to access my scsi scanner which is hooked up to the
adaptec controller in question.
Regards
Christof
uname -a
============================FreeBSD eri 8.0-STABLE FreeBSD 8.0-STABLE #1: Thu
Feb 25 04:01:40 CET 2010
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
camcontrol -devlist
============================<SCANNER 2.02> at scbus0
target 6 lun 0 (pass0)
<HDS722580VLSA80 V32OA63A> at scbus1 target 0 lun 0 (pass1,ada0)
<SAMSUNG SP2504C VT100-50> at scbus2 target 0 lun 0 (pass2,ada1)
<SAMSUNG HD322HJ 1AC01118> at scbus3 target 0 lun 0 (pass3,ada2)
<SAMSUNG SP2504C VT100-50> at scbus4 target 0 lun 0 (pass4,ada3)
<SanDisk SDDR-113 9412> at scbus7 target 0 lun 0 (pass5,da0)
relevant part of pciclonf -lv
============================ahc0@pci0:4:2:0: class=0x010000
card=0x00000000 chip=0x71789004
rev=0x00 hdr=0x00
vendor = 'Adaptec Inc'
device = 'Fast/Fast-Wide SCSI Ctrlr (AHA-2940/2940W)'
class = mass storage
subclass = SCSI
dmesg
============================Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #1: Thu Feb 25 04:01:40 CET 2010
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (3325.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x20652 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x298e3ff<SSE3,<b1>,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,<b25>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8184041472 (7804 MB)
ACPI APIC Table: <INTEL DH55HC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 5
ACPI Warning: 32/64X FACS address mismatch in FADT - DF626E40/
0DF626D40, using 32 (20100121/tbfadt-586)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DH55HC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xf0000000-0xf7ffffff,0xfe630000-0xfe63ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfe620000-0xfe62ffff at device 0.1
on
pci1
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port
0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18
at device 22.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 22.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.25> port 0xf040-0xf05f mem
0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:27:0e:05:b8:cc
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfe727000-0xfe7273ff irq
16
at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
hdac0: <Intel PCH High Definition Audio Controller> mem
0xfe720000-0xfe723fff
irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100122_0141
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfe726000-0xfe7263ff irq
23
at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ahc0: <Adaptec 2940 SCSI adapter> port 0xd000-0xd0ff mem
0xfe508000-0xfe508fff
irq 18 at device 2.0 on pci4
ahc0: [ITHREAD]
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel PCH AHCI SATA controller> port
0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem
0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 10.000 msec
vboxNetFltInitGlobalsAndIdc failed -2
module_register_init: MOD_LOAD (ng_vboxnetflt, 0xffffffff810fa44b,
0xffffffff810f4320) error 22
vboxdrv: fAsync=0 offMin=0x19c offMax=0x2b4
vboxnet0: Ethernet address: 0a:00:27:00:00:00
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <Kyocera Mita> at usbus0
ulpt0: <Kyocera Mita Kyocera Mita FS-1020D, class 0/0, rev 1.01/0.00, addr
3>
on usbus0
ulpt0: using bi-directional mode
ugen1.3: <SanDisk> at usbus1
umass0: <SanDisk SDDR-113, class 0/0, rev 2.00/94.12, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:7:0:-1: Attached to scbus7
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to
ready change, medium may have changed)
ugen1.4: <Logitech> at usbus1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 4> on usbus1
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 4> on
usbus1
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <HDS722580VLSA80 V32OA63A> ATA-6da0 at umass-sim0 bus 0 scbus7
target 0
lun 0
da0: <SanDisk SDDR-113 9412> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7790MB (15954944 512 byte sectors: 255H 63S/T 993C)
SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 78533MB (160836480 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <SAMSUNG HD322HJ 1AC01118> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
pass0 at ahc0 bus 0 scbus0 target 6 lun 0
pass0: <SCANNER 2.02> Fixed Scanner SCSI-CCS device
pass0: 3.300MB/s transfers
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
GEOM: da0: partition 1 does not start on a track boundary.
GEOM: da0: partition 1 does not end on a track boundary.
Root mount waiting for: usbus1
ugen1.5: <vendor 0x046d> at usbus1
uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 5>
on
usbus1
uaudio0: No playback!
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm4: <USB audio> on uaudio0
Trying to mount root from zfs:zroot
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon RV370 X300 SE> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.31.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R300 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 2 usecs
drm0: [ITHREAD]
ahc0: PCI error Interrupt at seqaddr = 0x7a
ahc0: Received a Master Abort
ahc0: Recovery Initiated>>>>>>>>>>>>>>>>>> Dump
Card State Begins
<<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x7d
Card was paused
ACCUM = 0x0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x3d
HCNT = 0x60 SCBPTR = 0x0
SCSISIGI[0xc6]:(REQI|BSYI|IOI|CDI) ERROR[0x40]:(PCIERRSTAT)
SCSIBUSL[0x0] LASTPHASE[0x40]:(IOI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x4]:(SDONE) SSTAT1[0x13]:(REQINIT|PHASECHG|
PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|
ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x3a]:(FIFOFLUSH|HDMAEN|SDMAEN|SCSIEN)
DFSTATUS[0x50]:(MREQPEND|DFCACHETH)
STACK: 0x0 0x165 0x195 0x6d
SCB count = 254
Kernel NEXTQSCB = 247
Card NEXTQSCB = 247
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
SCB_TAG[0xf6]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 238
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(6): 246
<<<<<<<<<<<<<<<<< Dump Card
State Ends
>>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x69f31520 : Length 96
(pass0:ahc0:0:6:0): BDR message in message buffer
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated>>>>>>>>>>>>>>>>>> Dump
Card State Begins
<<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x7d
Card was paused
ACCUM = 0x0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x3d
HCNT = 0x60 SCBPTR = 0x0
SCSISIGI[0xd6]:(REQI|BSYI|ATNI|IOI|CDI) ERROR[0x40]:(PCIERRSTAT)
SCSIBUSL[0x0] LASTPHASE[0x40]:(IOI) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0x20]:(DPHASE) SSTAT0[0x4]:(SDONE) SSTAT1[0x13]:(REQINIT|PHASECHG|
PHASEMIS)
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|
ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0x3a]:(FIFOFLUSH|HDMAEN|SDMAEN|SCSIEN)
DFSTATUS[0x50]:(MREQPEND|DFCACHETH)
STACK: 0x0 0x165 0x195 0x6d
SCB count = 254
Kernel NEXTQSCB = 247
Card NEXTQSCB = 247
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
SCB_TAG[0xf6]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 238
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(6): 246
<<<<<<<<<<<<<<<<< Dump Card
State Ends
>>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x69f31520 : Length 96
(pass0:ahc0:0:6:0): no longer in timeout, status = 24b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated>>>>>>>>>>>>>>>>>> Dump
Card State Begins
<<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x1a6
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x3d
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|
ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0x192 0xe 0x0 0x165
SCB count = 254
Kernel NEXTQSCB = 246
Card NEXTQSCB = 247
QINFIFO entries: 247
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
247 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x80]:
(SCB_XFERLEN_ODD)
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 238
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(6): 247
<<<<<<<<<<<<<<<<< Dump Card
State Ends
>>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf7 - timed out
sg[0] - Addr 0x69f31610 : Length 5
(pass0:ahc0:0:6:0): SCB 247: Immediate reset. Flags = 0x620
(pass0:ahc0:0:6:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
ahc0: Recovery Initiated>>>>>>>>>>>>>>>>>> Dump
Card State Begins
<<<<<<<<<<<<<<<<<
ahc0: Dumping Card State while idle, at SEQADDR 0x1a6
Card was paused
ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x3d
HCNT = 0x20 SCBPTR = 0x0
SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|
ENSCSIRST|ENSELTIMO)
SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
STACK: 0x192 0xe 0x192 0xe
SCB count = 254
Kernel NEXTQSCB = 247
Card NEXTQSCB = 246
QINFIFO entries: 246
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
Pending list:
246 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
Kernel Free SCB list: 248 249 250 251 252 253 245 244 243 242 241 240 239 238
237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219
218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200
199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181
180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162
161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143
142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124
123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105
104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(6): 246
<<<<<<<<<<<<<<<<< Dump Card
State Ends
>>>>>>>>>>>>>>>>>>
(pass0:ahc0:0:6:0): SCB 0xf6 - timed out
sg[0] - Addr 0x7f266980 : Length 96
(pass0:ahc0:0:6:0): SCB 246: Immediate reset. Flags = 0x620
(pass0:ahc0:0:6:0): no longer in timeout, status = 25b
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
ahc0: Timedout SCBs already complete. Interrupts may not be functioning.
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part.
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20100411/0a9fd8a1/attachment.pgp