Forgot to mention. The kernel is GENERIC + IPFIREWALL* and IPDIVERT
options; nothing else.
I also build a RELEASE_8_0 kernel and it shows the same problems, so
it's not just a recent -stable issue.
On Mon, Mar 01, 2010 at 09:34:50PM +0100, Ruben de Groot
typed:>
> Hi,
>
> After upgrading my 7.2-PRERELEASE system to 8-stable I encountered
> some very strange problems, most obvious:
>
> - startup would hang on starting devd, only continuing after a ^C
>
> - reboot would hang, but reboot -q would work.
>
> - nfs clients would report strange locking problems.
>
> Now I've found that probably the real problem here is that NO TIME
> IS PASSING (!!). Successively calling 'date' will allways give me
> the exact same time to the second.
> A 'sleep 1' will hang indefinetely.
>
>
> The BIOS is OK. After (and only after) a reboot, time will be updated to
> the time of reboot, but stay there forever after.
>
> Before I go back to 7.2 (tested there are still no problems
> there with a livecd) maybe someone want to shed some light on this.
> I've attached dmesg.boot.
>
> cheers,
> Ruben
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE-p2 #6: Sun Feb 21 15:45:07 CET 2010
> root@malenfant.lan:/usr/obj/usr/src/sys/MALENFANT
> module_register: module g_label already exists!
> Module g_label failed to register: 17
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2700.11-MHz 686-class
CPU)
> Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
>
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x2001<SSE3,CX16>
> AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
> TSC: P-state invariant
> real memory = 2147483648 (2048 MB)
> avail memory = 1958805504 (1868 MB)
> ACPI APIC Table: <090908 APIC1020>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <090908 RSDT1020> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of ffb80000, 80000 (3) failed
> acpi0: reservation of fff00000, 100000 (3) failed
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 77f00000 (3) failed
> ACPI HPET table warning: Sequence is non-zero (2)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
0xf0000000-0xf7ffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at
device 5.0 on pci1
> pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port
0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 17 at device 0.0 on pci2
> re0: Using 1 MSI messages
> re0: Chip rev. 0x34000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> re0: Ethernet address: 00:1f:e2:6a:ac:35
> re0: [FILTER]
> atapci0: <ATI IXP600 SATA300 controller> port
0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem
0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported
> ata2: <ATA channel 0> on atapci0
> ata2: port is not ready (timeout 0ms) tfd = 000001d0
> ata2: software reset clear timeout
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: port is not ready (timeout 0ms) tfd = 000001d0
> ata3: software reset clear timeout
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq
16 at device 19.0 on pci0
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq
17 at device 19.1 on pci0
> ohci1: [ITHREAD]
> usbus1: <OHCI (generic) USB controller> on ohci1
> ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq
18 at device 19.2 on pci0
> ohci2: [ITHREAD]
> usbus2: <OHCI (generic) USB controller> on ohci2
> ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq
17 at device 19.3 on pci0
> ohci3: [ITHREAD]
> usbus3: <OHCI (generic) USB controller> on ohci3
> ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq
18 at device 19.4 on pci0
> ohci4: [ITHREAD]
> usbus4: <OHCI (generic) USB controller> on ohci4
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff
irq 19 at device 19.5 on pci0
> ehci0: [ITHREAD]
> usbus5: EHCI version 1.0
> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci1: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> hdac0: <ATI SB600 High Definition Audio Controller> mem
0xfe7f4000-0xfe7f7fff irq 16 at device 20.2 on pci0
> hdac0: HDA Driver Revision: 20090624_0136
> hdac0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> ath0: <Atheros 5212> mem 0xfebf0000-0xfebfffff irq 20 at device 0.0
on pci3
> ath0: [ITHREAD]
> ath0: AR2413 mac 7.9 RF2413 phy 4.5
> rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebefc00-0xfebefcff irq 21 at device 1.0 on pci3
> miibus1: <MII bus> on rl0
> rlphy1: <RealTek internal media interface> PHY 0 on miibus1
> rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:0e:2e:55:b1:9b
> rl0: [ITHREAD]
> acpi_button0: <Power Button> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
> uart0: [FILTER]
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart1: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppc0: [ITHREAD]
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: [ITHREAD]
> lpt0: <Printer> on ppbus0
> lpt0: [ITHREAD]
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_throttle0: CLK_VAL field overlaps THT_EN bit
> device_attach: acpi_throttle0 attach returned 6
> powernow0: <PowerNow! K8> on cpu0
> cpu1: <ACPI CPU> on acpi0
> powernow1: <PowerNow! K8> on cpu1
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
forwarding disabled, default to accept, logging disabled
> The GEOM class LABEL is already loaded.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SA00> at ata0-master UDMA66
> ad4: 152627MB <SAMSUNG HD161HJ GF100-07> at ata2-master SATA300
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
usbus5
> GEOM: ad4: geometry does not match label (255h,63s != 16h,63s).
> ad6: 152627MB <Maxtor 6V160E0 VA111900> at ata3-master SATA300
> hdac0: HDA Codec #3: Realtek ALC662
> pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 3 nid 1 on hdac0
> pcm1: <HDA Realtek ALC662 PCM #1 Digital> at cad 3 nid 1 on hdac0
> SMP: AP CPU #1 Launched!
> GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
> Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus5
> Root mount waiting for: usbus5
> Root mount waiting for: usbus5
> Root mount waiting for: usbus5
> uhub5: 10 ports with 10 removable, self powered
> Root mount waiting for: usbus5
> Trying to mount root from ufs:/dev/ufs/ROOT
> ugen0.2: <FTDI> at usbus0
> ugen0.3: <vendor 0x1267> at usbus0
> ums0: <vendor 0x1267 PS/2+USB Mouse, class 0/0, rev 1.10/22.70, addr
3> on usbus0
> ums0: 3 buttons and [XYZ] coordinates ID=0
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"