Chris H
2009-Dec-09 00:06 UTC
ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309
Greetings, I am receiving the following in dmesg (verbose) during boot in 8-RELEASE (GENERIC) cvsuped 2009-12-08 @1am: ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309 As I create the KERNCONF for this machine, I want to confirm that this message is caused by the fact that APM is shut off in the BIOS, and won't cause any averse problems. We're having issues with "timeout" errors on some 50 TYAN server MB's since 7-RELEASE regarding the disk media (no matter how many different drives we use). So as I attempt to create a STABLE - in the sense that the servers are reliable, I want to eliminate any potential issues. more (informational) "noise" follows: CPU: Intel Pentium III Origin = "GenuineIntel" Id = 0x686 Stepping = 6 kernel: Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> Instruction TLB: 4 KB pages, 4-way set associative, 32 entries Instruction TLB: 4 MB pages, fully associative, 2 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries 2nd-level cache: 256 KB, 8-way set associative, 32 byte line size 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size real memory = 1073741824 (1024 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001026000 - 0x000000003edb4fff, 1037627392 bytes (253327 pages) avail memory = 1036378112 (988 MB) ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309 MP Configuration Table version 1.4 found at 0xc00f0db0 APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 1 (AP) MPTable: <AMI CNB30LE > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fdb90 bios32: Entry = 0xfdba0 (c00fdba0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdbc1 pnpbios: Found PnP BIOS data at 0xc00f4c50 pnpbios: Entry = f0000:3954 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic1: Assuming intbase of 16 ioapic0: intpin 10 bus PCI ioapic0: intpin 10 trigger: level ioapic0: intpin 10 polarity: low ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309 ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x06 domain=0, bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=0, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0080, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfb000000, size 24, memory disabled map[14]: type I/O Port, range 32, base 0xd800, size 8, port disabled map[18]: type Memory, range 32, base 0xfcaff000, size 12, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 domain=0, bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfcafe000, size 12, enabled map[14]: type I/O Port, range 32, base 0xd400, size 6, enabled map[18]: type Memory, range 32, base 0xfc900000, size 20, enabled pcib0: slot 4 INTA routed to irq 20 found-> vendor=0x1166, dev=0x0200, revid=0x50 domain=0, bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type I/O Port, range 32, base 0x580, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 domain=0, bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 domain=0, bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xfcafc000, size 12, enabled pcib0: slot 15 INTA routed to irq 10 vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xfb000000-0xfbffffff,0xfcaff000-0xfcafffff at device 1.0 on pci0 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfcafe000-0xfcafefff,0xfc900000-0xfc9fffff irq 20 at device 4.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfcafe000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 100c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:e0:81:20:9d:66 ioapic1: routing intpin 4 (PCI IRQ 20) to lapic 0 vector 48 fxp0: [MPSAFE] fxp0: [ITHREAD] isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x02 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50 ata1: [MPSAFE] ata1: [ITHREAD] Thank you for all your time and consideration in this matter. --Chris
John Baldwin
2009-Dec-09 15:17 UTC
ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309
On Tuesday 08 December 2009 7:06:18 pm Chris H wrote:> Greetings, > I am receiving the following in dmesg (verbose) during boot in 8-RELEASE (GENERIC) > cvsuped 2009-12-08 @1am: > ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309 > > As I create the KERNCONF for this machine, I want to confirm that this message is > caused by the fact that APM is shut off in the BIOS, and won't cause any averse > problems. We're having issues with "timeout" errors on some 50 TYAN server MB's > since 7-RELEASE regarding the disk media (no matter how many different drives we > use). So as I attempt to create a STABLE - in the sense that the servers are > reliable, I want to eliminate any potential issues. > > more (informational) "noise" follows:You can ignore the message, I do think it is due to disabling ACPI in your BIOS. Do you have problems when ACPI is enabled? ACPI is generally going to be more reliable than !ACPI in the future as it seems many BIOS vendors no longer test the !ACPI case as much (e.g. I've seen Intel motherboards with incomplete or incorrect MP Tables because no commercial OS uses the MP Table anymore). -- John Baldwin