Hello,
Recently I updated my main PC from 7.2(7-STABLE around Oct 8th
actually) to 8.0R (amd64). After that, I noticed that the Apache HTTP
server (2.2.13) on the PC started to behave strangely. When I tried to
see a page on the PC with a lot of thumbnails (more than 30 or 40
maybe), the page stopped loading and many thumbnail images were
missing (not downloaded properly). It never happened until upgrade (of
course I recompiled httpd and related libraries).
After some investigation, I noticed that TCP connections stalled with
large Send-Q.
% netstat -n (just after a browser hit a page with many thumbnails)
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp6 0 14767 2001:200:905:131.80 2001:200:905:15f.1369 ESTABLISHED
tcp6 0 13793 2001:200:905:131.80 2001:200:905:15f.1368 ESTABLISHED
tcp6 0 13148 2001:200:905:131.80 2001:200:905:15f.1367 ESTABLISHED
tcp6 0 16749 2001:200:905:131.80 2001:200:905:15f.1366 ESTABLISHED
tcp6 0 15136 2001:200:905:131.80 2001:200:905:15f.1365 ESTABLISHED
tcp6 0 17390 2001:200:905:131.80 2001:200:905:15f.1364 ESTABLISHED
(omit other lines)
Soon the state changed to FIN_WAIT_1, and never gone until I close the
web browser. The example is IPv6, but it also happened with IPv4. It
seems that the size of queues are almost the same as the size of
thumbnail files.
Also I cannot csup the source tree on this PC now, because the
connection stall in the same way. Qpopper stalls when my mailbox
contains some emails (I'm not sure about the exact threshold).
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 897 133.5.7.92.110 202.228.xxx.xxx.38167 ESTABLISHED
tcp4 0 18053 133.5.6.4.54003 59.106.xxx.xxx.5999 ESTABLISHED
On the other hand, I can SCP dozens of photos to the PC without
problems, and downloading a single large file from the PC via HTTP is
also fine.
I copied some HTML pages with many thumbnails to other PC running
8.0-RC2 (i386), but I couldn't reproduce the problem. The former PC
uses vge and latter uses rl, so it might be a NIC driver issue?? I'll
try to replace NIC cards when I have time....
vge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:02:2a:dd:05:41
inet 133.5.6.4 netmask 0xffffff00 broadcast 133.5.6.255
inet6 fe80::202:2aff:fedd:541%vge0 prefixlen 64 scopeid 0x1
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:02:2a:dd:0c:31
inet 133.5.7.92 netmask 0xffffff00 broadcast 133.5.7.255
inet6 fe80::202:2aff:fedd:c31%vge1 prefixlen 64 scopeid 0x2
inet6 2001:200:905:1407:202:2aff:fedd:c31 prefixlen 64 autoconf
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vge2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:02:2a:dd:00:7d
inet 133.69.133.98 netmask 0xfffffff0 broadcast 133.69.133.111
inet6 fe80::202:2aff:fedd:7d%vge2 prefixlen 64 scopeid 0x3
inet6 2001:200:905:1314::80 prefixlen 64
inet6 2001:200:905:1314:202:2aff:fedd:7d prefixlen 64 autoconf
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vge0@pci0:6:1:0: class=0x020000 card=0x01101106 chip=0x31191106 rev=0x11
hdr=0x00
vendor = 'VIA Technologies Inc'
device = ''Velocity' Gigabit Ethernet Controllers
(VT6120/VT6121/VT6122)'
class = network
subclass = ethernet
vge1@pci0:6:2:0: class=0x020000 card=0x01101106 chip=0x31191106 rev=0x11
hdr=0x00
vendor = 'VIA Technologies Inc'
device = ''Velocity' Gigabit Ethernet Controllers
(VT6120/VT6121/VT6122)'
class = network
subclass = ethernet
vge2@pci0:6:3:0: class=0x020000 card=0x01101106 chip=0x31191106 rev=0x11
hdr=0x00
vendor = 'VIA Technologies Inc'
device = ''Velocity' Gigabit Ethernet Controllers
(VT6120/VT6121/VT6122)'
class = network
subclass = ethernet
% netstat -ni
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
vge0 1500 <Link#1> 00:02:2a:dd:05:41 2124119 0 2158388 3
0
vge0 1500 133.5.6.0/24 133.5.6.4 1958844 - 2157884 - -
vge0 1500 fe80:1::202:2 fe80:1::202:2aff: 0 - 1 - -
vge1 1500 <Link#2> 00:02:2a:dd:0c:31 1005409 0 32166 0
0
vge1 1500 133.5.7.0/24 133.5.7.92 431605 - 11761 - -
vge1 1500 fe80:2::202:2 fe80:2::202:2aff: 0 - 1452 - -
vge1 1500 2001:200:905: 2001:200:905:1407 0 - 16518 - -
vge2 1500 <Link#3> 00:02:2a:dd:00:7d 563715 0 855146 2
0
vge2 1500 133.69.133.96 133.69.133.98 445915 - 3658 - -
vge2 1500 fe80:3::202:2 fe80:3::202:2aff: 0 - 1875 - -
vge2 1500 2001:200:905: 2001:200:905:1314 0 - 65850 - -
vge2 1500 2001:200:905: 2001:200:905:1314 0 - 0 - -
I believe these Oerrs were due to watchdog timeout like this:
Dec 2 13:12:04 elvenbow kernel: vge2: watchdog timeout
Dec 2 13:12:04 elvenbow kernel: vge2: link state changed to DOWN
Dec 2 13:12:06 elvenbow kernel: vge2: link state changed to UP
Dec 3 02:50:27 elvenbow kernel: vge0: watchdog timeout
Dec 3 02:50:27 elvenbow kernel: vge0: link state changed to DOWN
Dec 3 02:50:30 elvenbow kernel: vge0: link state changed to UP
Such timeouts were observed before upgrade, and no noticable effect to
the network connection so far.
I tried ifconfig vge2 -rxcsum -txcsum but had no effect. I'm using pf,
but disabling pf also had no effect.
Any ideas to narrow down the cause? Please let me know if you need
additional information.
I attached dmesg.boot. I'm sorry it is not a verbose output because
still I'm compiling all the installed ports....
Regards,
--
Yoshiaki Kasahara
Research Institute for Information Technology, Kyushu University
kasahara@nc.kyushu-u.ac.jp
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Thu Nov 26 14:33:01 JST 2009
root@elvenbow.cc.kyushu-u.ac.jp:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100800<SYSCALL,NX,LM>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2053185536 (1958 MB)
ACPI APIC Table: <INTEL D925CV2 >
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL D925CV2> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xf4000000-0xf7ffffff,0xd0000000-0xd7ffffff,0xf8000000-0xf8ffffff irq 16 at
device 0.0 on pci1
hdac0: <Intel 82801F High Definition Audio Controller> mem
0xf3afc000-0xf3afffff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f30
usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf3afb800-0xf3afbbff
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vge0: <VIA Networking Gigabit Ethernet> port 0xb800-0xb8ff mem
0xf3b00000-0xf3b000ff irq 22 at device 1.0 on pci6
miibus0: <MII bus> on vge0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> PHY 1 on miibus0
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
vge0: WARNING: using obsoleted if_watchdog interface
vge0: Ethernet address: 00:02:2a:dd:05:41
vge0: [ITHREAD]
vge1: <VIA Networking Gigabit Ethernet> port 0xb400-0xb4ff mem
0xf3b00400-0xf3b004ff irq 18 at device 2.0 on pci6
miibus1: <MII bus> on vge1
ciphy1: <Cicada CS8201 10/100/1000TX PHY> PHY 1 on miibus1
ciphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
vge1: WARNING: using obsoleted if_watchdog interface
vge1: Ethernet address: 00:02:2a:dd:0c:31
vge1: [ITHREAD]
vge2: <VIA Networking Gigabit Ethernet> port 0xb000-0xb0ff mem
0xf3b00800-0xf3b008ff irq 19 at device 3.0 on pci6
miibus2: <MII bus> on vge2
ciphy2: <Cicada CS8201 10/100/1000TX PHY> PHY 1 on miibus2
ciphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
vge2: WARNING: using obsoleted if_watchdog interface
vge2: Ethernet address: 00:02:2a:dd:00:7d
vge2: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6 SATA150 controller> port
0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f mem
0xf3afbc00-0xf3afbfff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.00 controller with 4 1.5Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller> port
0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2d00000f2d
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3000099607 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL12> at ata0-master UDMA33
ad4: 239372MB <Maxtor 7V250F0 VA111630> at ata2-master SATA150
ad6: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata3-master SATA150
hdac0: HDA Codec #2: Realtek ALC880
pcm0: <HDA Realtek ALC880 PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: <HDA Realtek ALC880 PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: <HDA Realtek ALC880 PCM #2 Digital> at cad 2 nid 1 on hdac0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad4s1: media size does not match label.
GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad6s1: media size does not match label.
GEOM_MIRROR: Device mirror/gm0s1 launched (2/2).
GEOM: ad6s2: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/mirror/gm0s1a
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4167B DL12> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen0.2: <Microsoft> at usbus0
ums0: <Microsoft Microsoft 5-Button Mouse with I, class 0/0, rev 1.10/3.00,
addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=0
Yoshiaki Kasahara
2009-Dec-03 13:15 UTC
vge problem (Re: 8.0R TCP connection stall with large Send-Q)
On Thu, 03 Dec 2009 13:50:29 +0900 (JST), Yoshiaki Kasahara <kasahara@nc.kyushu-u.ac.jp> said:> I copied some HTML pages with many thumbnails to other PC running > 8.0-RC2 (i386), but I couldn't reproduce the problem. The former PC > uses vge and latter uses rl, so it might be a NIC driver issue?? I'll > try to replace NIC cards when I have time....I remembered that there was an onboard NIC (msk0), so I enabled it and moved one IP address to the msk0. Then, the problem was disappeared for that IP address. So, I believe that vge driver of 8.0R is somewhat broken. Is there anyone who can fix the problem? I'm willing to test patches on my PC if available. Anyway I'm considering to purchase two more NIC cards, because I need a quick fix... Regards, -- Yoshiaki Kasahara Research Institute for Information Technology, Kyushu University kasahara@nc.kyushu-u.ac.jp