On Thu, Nov 12, 2009 at 05:33:15PM +0100, Guido Falsi
wrote:> Hello,
>
> I have an HP DL160 G6 server with FreeBSD 8 (cvsupped from RELENG_8
> yesterday) with a Smart Array P212 SAS controller. There is an HP
> Storageworks 1/8 G2 autoloader (dmesg from the machine attached).
Forgot the attachment, sorry.
Here it comes.
--
Guido Falsi <mad@madpilot.net>
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC2 #6: Thu Nov 12 11:57:04 CET 2009
root@xxx.xxx.it:/usr/obj/usr/src/sys/UXIFI04 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (2000.08-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4095668224 (3905 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 16
cpu1 (AP): APIC ID: 18
cpu2 (AP): APIC ID: 20
cpu3 (AP): APIC ID: 22
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib2
ciss0: <HP Smart Array P212> port 0xe800-0xe8ff mem
0xfb800000-0xfbbfffff,0xfbeff000-0xfbefffff irq 24 at device 0.0 on pci7
ciss0: PERFORMANT Transport
ciss0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
0xd880-0xd89f mem
0xfb760000-0xfb77ffff,0xfb740000-0xfb75ffff,0xfb7b8000-0xfb7bbfff irq 32 at
device 0.0 on pci5
igb0: Using MSIX interrupts with 3 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:26:55:80:53:fe
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
0xdc00-0xdc1f mem
0xfb7e0000-0xfb7fffff,0xfb7c0000-0xfb7dffff,0xfb7bc000-0xfb7bffff irq 42 at
device 0.1 on pci5
igb1: Using MSIX interrupts with 3 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:26:55:80:53:ff
pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci4: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2400
usbus0: <UHCI (generic) USB controller> on uhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa7f8000-0xfa7f83ff irq
18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem
0xf8000000-0xf8ffffff,0xfb6fc000-0xfb6fffff,0xfa800000-0xfaffffff irq 16 at
device 0.0 on pci2
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 23 at device
29.0 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2400
usbus2: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 19 at device
29.1 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2400
usbus3: <UHCI (generic) USB controller> on uhci2
uhci3: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 18 at device
29.2 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2400
usbus4: <UHCI (generic) USB controller> on uhci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfa7fa000-0xfa7fa3ff irq
23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc09f mem
0xfa7fc000-0xfa7fc7ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 11, should be 10 20090521
tbutils-275
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to
/boot/loader.conf.
ZFS filesystem version 13
ZFS storage pool version 13
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x110 offMax=0x238
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ad4: 152627MB <GB0160EAFJE HPG0> at ata2-master SATA300
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ad6: 152627MB <GB0160EAFJE HPG0> at ata3-master SATA300
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen0.2: <ServerEngines> at usbus0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on
usbus0
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on
usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen3.2: <vendor 0x04d9> at usbus3
ums1: <vendor 0x04d9 product 0x0499, class 0/0, rev 1.10/2.90, addr 2> on
usbus3
ums1: 3 buttons and [XYZ] coordinates ID=0
(probe19:ciss0:32:4:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe19:ciss0:32:4:0): CAM Status: SCSI Status Error
(probe19:ciss0:32:4:0): SCSI Status: Check Condition
(probe19:ciss0:32:4:0): NOT READY asc:3a,0
(probe19:ciss0:32:4:0): Medium not present
(probe19:ciss0:32:4:0): Unretryable error
sa0 at ciss0 bus 32 target 4 lun 0
sa0: <HP Ultrium 4-SCSI U51W> Removable Sequential Access SCSI-5 device
sa0: 135.168MB/s transfers
sa0: Command Queueing enabled
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from zfs:tank
ugen3.3: <CHICONY> at usbus3
ukbd1: <CHICONY Compaq USB Keyboard, class 0/0, rev 1.10/1.05, addr 3> on
usbus3
kbd3 at ukbd1
uhid0: <CHICONY Compaq USB Keyboard, class 0/0, rev 1.10/1.05, addr 3> on
usbus3
igb0: link state changed to UP