I have switched to working hardware. Sure makes a difference ;-)
Now I am down to a couple issues:
1. When booting I first get the following:
F1: FreeBSD
F5: Drive 0
F6: PXE
Boot: F1
At that point it just sits and starts adding #s at the end of the Boot
statement. If I press F5 (none of the other F keys do anything), then
I get another Boot: F1 line and its sits for a moment and then boots
from the disk. I used the standard install with the FreeBSD Boot
Loader.
After that the system comes up and runs fine. I am only using it for
network testing so haven't placed any great load on it but everything
I have tried works fine - until I try and shut it down. Then I get a
panic at the very end. It also does not shut off the power. I have a
console log of the entire boot/shutdown process. The only user
command I entered was shutdown -p now.
/boot.config: -Dh
Consoles: internal video/keyboard serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 638kB/64512kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root@almeida.cse.buffalo.edu, Sun Sep 6 03:42:03 UTC 2009)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x8b2774 data=0xde874+0x1feb04 syms=
[0x4+0x9c300+0
x4+0xd55bb]
|
ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD?
3 3
3 3 ______
3 3 | ____| __ ___ ___
3 Welcome to FreeBSD! 3 | |__ | '__/ _ \/ _ \
3 3 | __|| | | __/ __/
3 3 | | | | | | |
3 1. Boot FreeBSD [default] 3 |_| |_| \___|\___|
3 2. Boot FreeBSD with ACPI enabled 3 ____ _____ _____
3 3. Boot FreeBSD in Safe Mode 3 | _ \ / ____| __ \
3 4. Boot FreeBSD in single user mode 3 | |_) | (___ | | | |
3 5. Boot FreeBSD with verbose logging 3 | _ < \___ \| | | |
3 6. Escape to loader prompt 3 | |_) |____) | |__| |
3 7. Reboot 3 | | | |
3 3 |____/|_____/|_____/
3 3
3 3
3 3
3 Select option, [Enter] for default 3
3 or [Space] to pause timer 7 3
@DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA4 #0: Sun Sep 6 05:51:03 UTC 2009
root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (233.29-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features
=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO
V,MMX>
real memory = 67108864 (64 MB)
avail memory = 46567424 (44 MB)
kbd1 at kbdmux0
ACPI Error: A valid RSDP was not found 20090521 tbxfroot-309
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> pcibus 0 on
motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
vgapci0: <VGA-compatible display> mem 0xfedc0000-0xfeddffff,
0xfd800000-0xfd
ffffff,0xfe000000-0xfe7fffff irq 9 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177
,0x376,0xfcf0-0xfcff at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfcc0-0xfcdf
irq 11
at device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
piix0: <PIIX Timecounter> port 0x7000-0x700f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfc40-0xfc7f irq 10 at
device
13.0 on pci0
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:4b:2c:bb:09
xl0: [ITHREAD]
cpu0 on motherboard
pmtimer0 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <System Memory> can't assign resources (memory)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid
PNP030
3 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10
pnpid PNP
0501 on isa0
uart0: [FILTER]
uart0: console (9600,n,8,1)
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 pn
pid PNP0700 on isa0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 pnpid
PNP0
400 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc6fff,0xe4000-0xeffff pnpid
ORM0
000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <System Memory> can't assign resources (memory)
Timecounter "TSC" frequency 233289523 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ad0: 2014MB <WDC AC12100L 09.09M08> at ata0-master UDMA33
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: CDROM <TOSHIBA CD-ROM XM-6202B/1110> at ata1-master PIO4
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/ad0s1a
Entropy harvesting: interrupts ethernet point_to_point kickstart.
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 165348 free (3260 frags, 20261 blocks, 1.3%
fragmentati
on)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 487494 free (5150 frags, 60293 blocks, 0.7%
fragmentati
on)
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Starting Network: lo0.
xl0: link state changed to DOWN
Configuring syscons: blanktime.
Fri Sep 18 13:38:17 PDT 2009
Sep 18 13:38:53 su: doug to root on /dev/ttyv0
Sep 18 13:39:10 shutdown: power-down by doug:
Stopping cron.
Stopping sshd.
Stopping devd.
Writing entropy file:.
Terminated
.
Sep 18 13:39:20 syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
lock order reversal:
1st 0xc1eac8b8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1200
2nd 0xc1fdfce8 devfs (devfs) @ /usr/src/sys/ufs/ffs/ffs_vfsops.c:1194
KDB: stack backtrace:
db_trace_self_wrapper
(c0c74987,c1bd399c,c08c0f75,c08b1cfb,c0c7785a,...) at
db_trace_self_wrapper+0x26
kdb_backtrace(c08b1cfb,c0c7785a,c1d2e938,c1d2e868,c1bd39f8,...) at
kdb_back
trace+0x29
_witness_debugger(c0c7785a,c1fdfce8,c0c667ac,c1d2e868,c0c97ee0,...) at
_wit
ness_debugger+0x25
witness_checkorder(c1fdfce8,9,c0c97ee0,4aa,c1fdfd04,...) at
witness_checkor
der+0x839
__lockmgr_args(c1fdfce8,80400,c1fdfd04,0,0,...) at __lockmgr_args+0x7a7
vop_stdlock(c1bd3b00,556,c1bd3af8,80400,c1fdfc90,...) at vop_stdlock
+0x62
VOP_LOCK1_APV(c0d535c0,c1bd3b00,c2020860,c0d90c80,c1fdfc90,...) at
VOP_LOCK
1_APV+0xb5
_vn_lock(c1fdfc90,80400,c0c97ee0,4aa,c1fd2400,...) at _vn_lock+0x5e
ffs_flushfiles(c1f84a10,2,c1d6fd80,556,3,...) at ffs_flushfiles+0xa7
softdep_flushfiles(c1f84a10,2,c1d6fd80,c0c7eaec,8aa,...) at
softdep_flushfi
les+0x2e
ffs_unmount(c1f84a10,80000,c1bd3bf4,4f5,c1bd3c00,...) at ffs_unmount
+0x149
dounmount(c1f84a10,80000,c1d6fd80,c341fc50,0,...) at dounmount+0x46d
vfs_unmountall(c0c7e7c4,0,c0c715f2,129,0,...) at vfs_unmountall+0x4e
boot(c0dc4f70,0,c0c715f2,ac,bfbfe9c0,...) at boot+0x44f
reboot(c1d6fd80,c1bd3cf8,4,c0c78ac5,c0d56f04,...) at reboot+0x69
syscall(c1bd3d38) at syscall+0x2a3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (55, FreeBSD ELF32, reboot), eip = 0x8050f83, esp =
0xbfbfe88c,
ebp = 0xbfbfe968 ---
Uptime: 1m45s
The operating system has halted.
Please press any key to reboot.