[This is on 7.2-STABLE]
I have a USB card reader which gives me 4 da drives.
I was able to wire them down so they appear as:
scbus3 on umass-sim0 bus 0:
<Generic USB SD Reader 1.00> at scbus3 target 0 lun 0 (da30,pass30)
<Generic USB CF Reader 1.01> at scbus3 target 0 lun 1 (da31,pass31)
<Generic USB SM Reader 1.02> at scbus3 target 0 lun 2 (da32,pass32)
<Generic USB MS Reader 1.03> at scbus3 target 0 lun 3 (da33,pass33)
The relevant parts of dmesg look like this (indented for readability):
usb4: EHCI version 1.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2> on
uhub4
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3>
on uhub5
da30 at umass-sim0 bus 0 target 0 lun 0
da31 at umass-sim0 bus 0 target 0 lun 1
da32 at umass-sim0 bus 0 target 0 lun 2
da33 at umass-sim0 bus 0 target 0 lun 3
However, if I insert a USB stick into one of the remaining ports
umass0 will get attached to it and umass1 to my quad USB card
reader device:
usb4: EHCI version 1.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
umass0: <vendor 0x13fe Patriot Memory, class 0/0, rev 2.00/1.10, addr 2>
on uhub4
da30 at umass-sim0 bus 0 target 0 lun 0
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3> on
uhub4
umass1: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4>
on uhub5
da7 at umass-sim1 bus 1 target 0 lun 0
da8 at umass-sim1 bus 1 target 0 lun 1
da9 at umass-sim1 bus 1 target 0 lun 2
da14 at umass-sim1 bus 1 target 0 lun 3
How can I wire down umass0 so that it always gets attached to uhub5?
Thanks,
-Andre