hi all
Per Otterstr?m wrote:
> Hi all.
>
> I'm running 7.1-RELEASE.
>
> When I plug in my D-Link DGE-660TD gigabit cardbus adapter I get:
>
> re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit
Ethernet> port
> 0x4000-0x40ff mem 0xd0201000-0xd02011ff irq 11 at device 0.0 on
cardbus1
> re0: Chip rev. 0x10000000
> re0: MAC rev. 0x00000000
> re0: PHY write failed
> re0: PHY write failed
> re0: PHY read failed
> re0: MII without any phy!
> device_attach: re0 attach returned 6
>
> Relevant part from pciconf -lv:
>
> r...@pci0:6:0:0: class=0x020000 card=0x43011186 chip=0x816910ec
rev=0x10
> hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet
Controller'
> class = network
> subclass = ethernet
>
> I've seen several patches for similar problems provided by Pyun
YongHyeon,
> but I don't think any one of them are applicable in my case.
>
> Any advice appreciated.
>
> regards, Pelle
i got same error on my 7.1 i386
dmesg output with hw.cardbus.debug="1" and
hw.cardbus.cis_debug="1" is
here -
http://pastebin.com/m63175351
i am ready to give shell access if anyone need it
wbr
Andrei