Just an effort to test RELENG_6 . No issues noted on my Dell server.
Nice work folks!
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-PRERELEASE #1 r183385M: Fri Sep 26 11:13:48 PDT 2008
root@desdemona.office.miralink.com:/usr/obj/home/sbruno/bsd/6/sys/GENERIC
ACPI APIC Table: <DELL PE BKC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 1073479680 (1023 MB)
avail memory = 1037283328 (989 MB)
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Sep 26 2008 11:10:49)
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem
0xfe9f0000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 34 at device 5.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem
0xfe7ff000-0xfe7fffff irq 37 at device 11.0 on pci3
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xccc0-0xccff mem 0xfe4e0000-0xfe4fffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:e2:ff:fd
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port
0xbcc0-0xbcff mem 0xfe2e0000-0xfe2fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:e2:ff:fe
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x9ce0-0x9cff
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x9cc0-0x9cdf
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x9ca0-0x9cbf
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xfeb00000-0xfeb003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd0fff,0xec000-0xeffff
on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2793191800 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <HL-DT-ST GCR-8240N/1.06> at ata0-master UDMA33
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da2 at ahc0 bus 0 target 1 lun 0
da2: <Rorke GalaxyHD 342D> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da2: 952856MB (1951449088 512 byte sectors: 255H 63S/T 121472C)
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST373207LC D701> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LC 0003> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
GEOM_MIRROR: Device gm0 created (id=2295809732).
GEOM_MIRROR: Device gm0: provider da0 detected.
GEOM_MIRROR: Device gm0: provider da1 detected.
GEOM_MIRROR: Device gm0: provider da1 activated.
GEOM_MIRROR: Device gm0: provider da0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
em0: link state changed to UP
[sbruno@desdemona ~]$ uname -a
FreeBSD desdemona.office.miralink.com 6.4-PRERELEASE FreeBSD
6.4-PRERELEASE #1 r183385M: Fri Sep 26 11:13:48 PDT 2008
root@desdemona.office.miralink.com:/usr/obj/home/sbruno/bsd/6/sys/GENERIC
i386
--
Sean Bruno
MiraLink Corporation
6015 NE 80th Ave, Ste 100
Portland, OR 97218
Phone 503-621-5143
Fax 503-621-5199
MSN: sbruno@miralink.com
Google: seanwbruno@gmail.com
Yahoo: sean_bruno@yahoo.com