limguowei@gmail.com
2008-Sep-26 03:53 UTC
Problems with FreeBSD 7.1 Pre-Release after Upgrade from 7.0
After cvsuping the source and recompiling the kernel from 7.0
The follow programs produce error
I created a memory disk for a /temp in FreeBSD 7.0 upon upgrading to 7.1 it
refuses to created and mount /dev/md0 as successful in 7.0
pid 977/978 (mdconfig) uid 0 exit from signal 11 (core dumped)
pid 977 (mdconfig), uid 0: exited on signal 11 (core dumped)
pid 978 (mdconfig), uid 0: exited on signal 11 (core dumped)
And when i used kldstat the same thing happens after printing one entry
# kldstat
Id Refs Address Size Name
1 12 0xc0400000 625fe0 kernel
Segmentation fault (core dumped)
My dmesg is as follows
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #4: Fri Sep 26 00:17:26 SGT 2008
4520G@ACER:/usr/obj/usr/src/sys/TYLER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2000.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 3219980288 (3070 MB)
avail memory = 3141251072 (2995 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133, RF2425, RF2417)
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1d00-0x1dff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf3486000-0xf3486fff irq 18 at
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf3489000-0xf34890ff irq
19 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xf3487000-0xf3487fff irq 20 at
device 4.0 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf3489400-0xf34894ff irq
16 at device 4.1 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 4 ports with 4 removable, self powered
ugen0: <SuYin Acer CrystalEye webcam, class 239/2, rev 2.00/1.00, addr 2>
on uhub3
atapci0: <nVidia nForce MCP67 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30c0-0x30cf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <NVidia MCP67 High Definition Audio Controller> mem
0xf3480000-0xf3483fff irq 17 at device 7.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <1394 Open Host Controller Interface> mem 0xf3100000-0xf31007ff
irq 10 at device 9.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:11:e8:a8:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:e8:a8:00
fwe0: Ethernet address: 02:24:1b:e8:a8:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:24:1b:00:11:e8:a8:00 @ 0xfffe00000000, S400, maxrec
2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x18cc000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci1: <base peripheral> at device 9.1 (no driver attached)
pci1: <base peripheral> at device 9.2 (no driver attached)
pci1: <base peripheral> at device 9.3 (no driver attached)
pci1: <base peripheral> at device 9.4 (no driver attached)
atapci1: <nVidia ATA controller> port
0x30f0-0x30f7,0x30e4-0x30e7,0x30e8-0x30ef,0x30e0-0x30e3,0x30d0-0x30df mem
0xf3484000-0xf3485fff irq 18 at device 9.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0x30f8-0x30ff mem
0xf3488000-0xf3488fff,0xf3489c00-0xf3489cff,0xf3489800-0xf348980f irq 19 at
device 10.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: Ethernet address: 00:1e:68:02:78:b7
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem
0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 20 at
device 0.0 on pci2
nvidia0: <GeForce 8400M G> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci7: <ACPI PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0xf3000000-0xf300ffff irq 16 at device 0.0
on pci7
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:1f:3a:01:63:7d
ath0: mac 14.2 phy 7.0 radio 10.2
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <Optiarc DVD RW AD-7530B/NX09> at ata0-master UDMA33
ad4: 152627MB <Hitachi HTS541616J9SA00 SB4OC70P> at ata2-master UDMA33
pcm0: <HDA Codec: Realtek ALC268>
pcm0: <HDA Driver Revision: 20080420_0052>
GEOM_LABEL: Label for provider ad4s5 is ntfs/Data.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a
acpi_ec0: wait timed out (response), forcing polled mode
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding
disabled, default to deny, logging disabled
pid 971 (kldstat), uid 0: exited on signal 11 (core dumped)
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 977 (mdconfig), uid 0: exited on signal 11 (core dumped)
pid 978 (mdconfig), uid 0: exited on signal 11 (core dumped)
acpi_ec0: warning: EC done before starting event wait
pid 1371 (kldstat), uid 1001: exited on signal 11 (core dumped)
pid 4485 (kldstat), uid 0: exited on signal 11 (core dumped)
limguowei@gmail.com
2008-Sep-26 03:53 UTC
Problems with FreeBSD 7.1 Pre-Release after Upgrade from 7.0
After cvsuping the source and recompiling the kernel from 7.0 The follow programs produce error I created a memory disk for a /temp in FreeBSD 7.0 upon upgrading to 7.1 it refuses to created and mount /dev/md0 as successful in 7.0 pid 977/978 (mdconfig) uid 0 exit from signal 11 (core dumped) pid 977 (mdconfig), uid 0: exited on signal 11 (core dumped) pid 978 (mdconfig), uid 0: exited on signal 11 (core dumped) And when i used kldstat the same thing happens after printing one entry # kldstat Id Refs Address Size Name 1 12 0xc0400000 625fe0 kernel Segmentation fault (core dumped)
Christopher Arnold
2008-Sep-26 10:13 UTC
Problems with FreeBSD 7.1 Pre-Release after Upgrade from 7.0
On Thu, 25 Sep 2008, limguowei@gmail.com wrote:> After cvsuping the source and recompiling the kernel from 7.0 > > pid 971 (kldstat), uid 0: exited on signal 11 (core dumped) > fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 > pid 977 (mdconfig), uid 0: exited on signal 11 (core dumped) > pid 978 (mdconfig), uid 0: exited on signal 11 (core dumped) > acpi_ec0: warning: EC done before starting event wait > pid 1371 (kldstat), uid 1001: exited on signal 11 (core dumped) > pid 4485 (kldstat), uid 0: exited on signal 11 (core dumped) >Just checking, have you rebuilt your userland too? (And i see you use fuse, you might want to rebuild that to.) /Chris -- http://www.arnold.se/chris/