thr3ads.net - freebsd stable - FreeBSD 7.0-STABLE SATA300 detected as SATA150 [Apr 2008]

If this information is useful, please help other people find it:
Share via:

Abdullah Ibn Hamad Al-Marri

2008-Apr-22 19:11 UTC

FreeBSD 7.0-STABLE SATA300 detected as SATA150

Hello,


FreeBSD 7.0-STABLE #0: Tue Apr 22 17:32:02 UTC 2008
    arabian@MX1.WeArab.Net:/usr/obj/usr/src/sys/MX1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2666.63-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
usable memory = 4276047872 (4077 MB)
avail memory  = 4106981376 (3916 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <INTEL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd070-0xd077 mem
0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0100000-0xd01fffff irq 16 at
device 2.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem
0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:19:d1:a7:a4:72
re0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at
device 31.2 on pci0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
                                                                                
^^^^^^^^^^^
ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master SATA150
SMP: AP CPU #1 Launched!
 
Regards,

-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/





     
____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now. 
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Jeremy Chadwick

2008-Apr-22 19:28 UTC

head link

FreeBSD 7.0-STABLE SATA300 detected as SATA150

On Tue, Apr 22, 2008 at 12:11:13PM -0700, Abdullah Ibn Hamad Al-Marri
wrote:> atapci0: <Intel ICH7 SATA300 controller> port
0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at
device 31.2 on pci0
> ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
>                                                                            
^^^^^^^^^^^
> ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master SATA150
Please ensure the SATA150-limiting jumper from the drive has been
removed.  It's labelled OPT1 in the below picture:

http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1343&p_created=1112716146

I assure you these drives work fine with the above controller.  Taken
from our PDSMi+ production systems, which are ICH7:

atapci1: <Intel AHCI controller> port
0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem
0xe0000400-0xe00007ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ad4: 114473MB <Seagate ST3120827AS 3.42> at ata2-master SATA150
ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master SATA300

-- 
| Jeremy Chadwick                                jdc at parodius.com |
| Parodius Networking                       http://www.parodius.com/ |
| UNIX Systems Administrator                  Mountain View, CA, USA |
| Making life hard for others since 1977.              PGP: 4BD6C0CB |

Alexander Sack

2008-Apr-25 21:09 UTC

head link

FreeBSD 7.0-STABLE SATA300 detected as SATA150

On Tue, Apr 22, 2008 at 3:11 PM, Abdullah Ibn Hamad Al-Marri
<wearabnet@yahoo.ca> wrote:> Hello,
>
>
>  FreeBSD 7.0-STABLE #0: Tue Apr 22 17:32:02 UTC 2008
>     arabian@MX1.WeArab.Net:/usr/obj/usr/src/sys/MX1
>  Timecounter "i8254" frequency 1193182 Hz quality 0
>  CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2666.63-MHz K8-class
CPU)
>   Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
>  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>   AMD Features=0x20100800<SYSCALL,NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
>  usable memory = 4276047872 (4077 MB)
>  avail memory  = 4106981376 (3916 MB)
>  ACPI APIC Table: <INTEL DG31PR>
>  FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
>  ioapic0 <Version 2.0> irqs 0-23 on motherboard
>  acpi0: <INTEL> on motherboard
>  acpi0: [ITHREAD]
>  acpi0: Power Button (fixed)
>  Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>  acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>  acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
>  Timecounter "HPET" frequency 14318180 Hz quality 900
>  cpu0: <ACPI CPU> on acpi0
>  cpu1: <ACPI CPU> on acpi0
>  pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>  pci0: <ACPI PCI bus> on pcib0
>  pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>  pci1: <ACPI PCI bus> on pcib1
>  vgapci0: <VGA-compatible display> port 0xd070-0xd077 mem
0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0100000-0xd01fffff irq 16 at
device 2.0 on pci0
>  pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>  pci2: <ACPI PCI bus> on pcib2
>  pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>  pci3: <ACPI PCI bus> on pcib3
>  re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff
mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
>  miibus0: <MII bus> on re0
>  rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
>  rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
>  re0: Ethernet address: 00:19:d1:a7:a4:72
>  re0: [FILTER]
>  pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>  pci4: <ACPI PCI bus> on pcib4
>  isab0: <PCI-ISA bridge> at device 31.0 on pci0
>  isa0: <ISA bus> on isab0
>  atapci0: <Intel ICH7 SATA300 controller> port
0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at
device 31.2 on pci0
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  atapci0: [ITHREAD]
>  ata2: <ATA channel 0> on atapci0
>  ata2: [ITHREAD]
>  ata3: <ATA channel 1> on atapci0
>  ata3: [ITHREAD]
>  pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>  acpi_button0: <Sleep Button> on acpi0
>  acpi_button1: <Power Button> on acpi0
>  atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>  atkbd0: <AT Keyboard> irq 1 on atkbdc0
>  kbd0 at atkbd0
>  atkbd0: [GIANT-LOCKED]
>  atkbd0: [ITHREAD]
>  sc0: <System console> at flags 0x100 on isa0
>  sc0: VGA <16 virtual consoles, flags=0x300>
>  vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
>  Timecounters tick every 1.000 msec
>  ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
>                                                                            
^^^^^^^^^^^
>  ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master
SATA150
>  SMP: AP CPU #1 Launched!
>
>  Regards,
>
>  -Abdullah Ibn Hamad Al-Marri
>  Arab Portal
>  http://www.WeArab.Net/
Not sure if you know this but there should be no speed negotiation/DMA
level issues with a native AHCI SATA implementation.  If its reported
as SATA-150, its probably a hardware issue (with FPDMA and the general
DMA architecture of SATA, the driver really has no clue nor should it
on what speed the bus speed is - its strictly up to your cable,
chipset and drive).

I would definitely check what Jeremy mentioned as well as a faulty cable!

Long live no more CS jumpers....

-aps

freebsd stable - Apr 2008 - FreeBSD 7.0-STABLE SATA300 detected as SATA150

FreeBSD 7.0-STABLE SATA300 detected as SATA150

FreeBSD 7.0-STABLE SATA300 detected as SATA150

FreeBSD 7.0-STABLE SATA300 detected as SATA150