Trying to boot the 7.0 RC2 CD (or floppies), the kernel panics with: Fatal trap 12: page fault while in kernel mode The CD boots fine on 3 other machines I've tried, but none have the identical processor. One has an identical motherboard, but it's running a 2.26 GHz P4 rather than the 3.0 GHz P4 on my failing machine. The failing machine currently runs FreeBSD 6.3 just fine. Here's the console log of the failing boot. I also tried booting in safe mode, the panic is slightly different but it still panics. I also get the same panic using the just released 7.0 RC3, but I had the 7.2 boot floppies handy so I used that to get this trace. -- Jeff Jennings jeff.jennings18@gmail.com You can't solve a problem using the same thinking that got you there. - A.Einstein Learning something new is almost always a good idea. - B. Stroustrup You don't become a failure until you're satisfied with being one. - fortune No amount of careful planning will ever replace dumb luck. -------------- next part -------------- /boot.config: /boot/loader FreeBSD/i386 boot Default: 0:fd(0,a)/boot/loader boot: Uncompressing ... done Consoles: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS drive D: is disk2 BIOS 639kB/2095808kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@logan.cse.buffalo.edu, Thu Feb 7 18:48:10 UTC 2008) Loading /boot/defaults/loader.conf /kernel text=0x701ab4 \ Insert disk labelled "Kernel floppy 1" and press any key... | Insert disk labelled "Kernel floppy 2" and press any key... / Insert disk labelled "Kernel floppy 3" and press any key... data=0xad6e0+0x5a680 syms=[0x4+0x70280+0x4+0x90382] Insert boot floppy and press Enter /acpi.ko text=0x520e8 data=0x23a0+0x186c syms=[0x4+0x85c0+0x4+0xb056] / Insert disk labelled "Memory Filesystem floppy 1" and press any key... Insert boot floppy and press Enter - ??????????????????????????????????????????? ? ? ? ? ______ ? ? | ____| __ ___ ___ ? Welcome to FreeBSD! ? | |__ | '__/ _ \/ _ \ ? ? | __|| | | __/ __/ ? ? | | | | | | | ? 1. Boot FreeBSD [default] ? |_| |_| \___|\___| ? 2. Boot FreeBSD with ACPI disabled ? ____ _____ _____ ? 3. Boot FreeBSD in Safe Mode ? | _ \ / ____| __ \ ? 4. Boot FreeBSD in single user mode ? | |_) | (___ | | | | ? 5. Boot FreeBSD with verbose logging ? | _ < \___ \| | | | ? 6. Escape to loader prompt ? | |_) |____) | |__| | ? 7. Reboot ? | | | | ? ? |____/|_____/|_____/ ? ? ? ? ? ? ? Select option, [Enter] for default ? ? or [Space] to pause timer 6 ? ??????????????????????????????????????????? Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RC2 #0: Fri Feb 8 00:09:57 UTC 2008 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Logical CPUs per core: 2 real memory = 2147155968 (2047 MB) avail memory = 2087518208 (1990 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 655 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] ohci0: <SiS 5571 USB controller> mem 0xfebf9000-0xfebf9fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xfebfa000-0xfebfafff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xfebfb000-0xfebfbfff irq 22 at device 3.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfe000-0xfebfefff irq 23 at device 3.3 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 3 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 8 ports with 8 removable, self powered sym0: <1010-33> port 0xd000-0xd0ff mem 0xfebfd800-0xfebfdbff,0xfebf4000-0xfebf5fff irq 16 at device 8.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: [GIANT-LOCKED] sym0: [ITHREAD] sym1: <1010-33> port 0xe000-0xe0ff mem 0xfebfdc00-0xfebfdfff,0xfebf6000-0xfebf7fff irq 17 at device 8.1 on pci0 sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: [GIANT-LOCKED] sym1: [ITHREAD] pci0: <multimedia, audio> at device 9.0 (no driver attached) xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfd400-0xfebfd47f irq 19 at device 11.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> PHY 24 on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:9c:41:8a xl0: [ITHREAD] acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0d7532c ad0: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata0-master UDMA100 ad1: 28629MB <QUANTUM FIREBALLlct15 30 A01.0F00> at ata0-slave UDMA66 acd0: DVDR <NEC DVD RW ND-3550A/1.Y6> at ata1-master UDMA33 acd1: CDRW <ARTEC WRR-4848 1.08/1.08> at ata1-slave UDMA33 sa0 at sym1 bus 0 target 5 lun 0 sa0: <QUANTUM DLT-V4 0A00> Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider ad0 is msdosfs/SMART BTMGR. GEOM_LABEL: Label for provider ad0s5 is ext2fs//. GEOM_LABEL: Label for provider ad0s7 is ext2fs//var. GEOM_LABEL: Label for provider ad0s8 is ext2fs//usr. GEOM_LABEL: Label for provider ad0s9 is ext2fs//home. GEOM_LABEL: Label for provider ad0s10 is ext2fs//usr/pub. Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x20:0xc06e850c stack pointer = 0x28:0xe409594c frame pointer = 0x28:0xe409597c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 1 (swapper) trap number = 12 panic: page fault cpuid = 1 Uptime: 15s Cannot dump. No dump device defined. Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... cpu_reset: Stopping other CPUs