Hi,
I'm having trouble mounting external NTFS hard drive using fusefs-ntfs
port on Dell Latitude D620.
devil# uname -an
FreeBSD devil.micom.mng.net 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #3:
Tue Feb 5 10:29:24 ULAT 2008
tsgan@devil.micom.mng.net:/usr/obj/usr/src/sys/DEVIL i386
devil# pkg_info | grep fuse
fusefs-kmod-0.3.9.p1_3 Kernel module for fuse
fusefs-libs-2.7.2 FUSE allows filesystem implementation in userspace
fusefs-ntfs-1.1120 Mount NTFS partitions (read/write) and disk images
devil# kldload /usr/local/modules/fuse.ko
devil# kldstat
Id Refs Address Size Name
1 23 0xc0400000 6df8b4 kernel
2 1 0xc0ae0000 14324 snd_hda.ko
3 2 0xc0af5000 52a08 sound.ko
4 2 0xc0b48000 10ebc drm.ko
5 1 0xc0b59000 7184 i915.ko
6 1 0xc0b61000 6b314 acpi.ko
7 2 0xc4005000 c000 ipfw.ko
8 1 0xc4035000 4000 ipdivert.ko
9 1 0xc406d000 22000 linux.ko
11 3 0xc43dd000 3000 ucom.ko
12 1 0xc43e0000 3000 uftdi.ko
13 1 0xc43e5000 4000 uplcom.ko
14 1 0xc59aa000 e000 fuse.ko
When I try to mount it, on serial console I see:
...
umass0: <Seagate FreeAgent Go, class 0/0, rev 2.00/0.00, addr 2> on uhub4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Seagate FreeAgent Go 100F> Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 3f 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ABORTED COMMAND asc:0,0
(da0:umass-sim0:0:0:0): No additional sense information
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 3f 0 0 1 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ABORTED COMMAND asc:0,0
(da0:umass-sim0:0:0:0): No additional sense information
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
GEOM_LABEL: Label for provider da0s1 is ntfs/FreeAgent Drive.
GEOM_LABEL: Label ntfs/FreeAgent Drive removed.
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x746e756f
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc06d8f36
stack pointer = 0x28:0xe63d09b0
frame pointer = 0x28:0xe63d09b4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 19197 (mount_fusefs)
[thread pid 19197 tid 100099 ]
Stopped at strcmp+0x26: movzbl 0(%ecx),%eax
db> bt
Tracing pid 19197 tid 100099 td 0xc4312210
strcmp(c59b644f,746e756f,c3e43934,2d,e63d0a8c,...) at strcmp+0x26
vfs_getopt(c09bb6c0,c59b644f,0,0,c4312210,...) at vfs_getopt+0x35
fuse_mount(c3e438b8,c4312210,c08d0185,3e9,0,...) at fuse_mount+0x70
vfs_donmount(48217080,c,e63d0c70,c48e4000,bfbfebb4,...) at
vfs_donmount+0x13ad
nmount(c4312210,e63d0cfc,c,e63d0d38,c095e6d0,...) at nmount+0xb2
syscall(e63d0d38) at syscall+0x2b3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (378, FreeBSD ELF32, nmount), eip = 0x480ccb4b, esp =
0xbfbfe64c, ebp = 0xbfbfebc8 ---
db> trace
Tracing pid 19197 tid 100099 td 0xc4312210
strcmp(c59b644f,746e756f,c3e43934,2d,e63d0a8c,...) at strcmp+0x26
vfs_getopt(c09bb6c0,c59b644f,0,0,c4312210,...) at vfs_getopt+0x35
fuse_mount(c3e438b8,c4312210,c08d0185,3e9,0,...) at fuse_mount+0x70
vfs_donmount(48217080,c,e63d0c70,c48e4000,bfbfebb4,...) at
vfs_donmount+0x13ad
nmount(c4312210,e63d0cfc,c,e63d0d38,c095e6d0,...) at nmount+0xb2
syscall(e63d0d38) at syscall+0x2b3
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (378, FreeBSD ELF32, nmount), eip = 0x480ccb4b, esp =
0xbfbfe64c, ebp = 0xbfbfebc8 ---
db>
Any idea how to solve this problem?
thanks,
Ganbold
--
Real computer scientists don't program in assembler. They don't write in
anything less portable than a number two pencil.
Zaphod Beeblebrox
2008-Feb-04 22:57 UTC
fusefs-ntfs makes fatal trap/page fault in FreeBSD-7.0
On Feb 4, 2008 10:31 PM, Ganbold <ganbold@micom.mng.net> wrote:> I'm having trouble mounting external NTFS hard drive using fusefs-ntfs > port on Dell Latitude D620. >I havn't seen this specific problem, but on my Dell XPS 1730 (core-2-duo-extreme) The NTFS-3g mounts doen't seem to shutdown properly. That is: many of the writes are uncommitted and the filesystem needs a check and often information is lost ... unless I unmount the filesystems before shutdown. UFS and ZFS partitions seem to shutdown just fine. I've never had a problem with FAT-32 partitions, either, but the ntfs-3g is problematic somehow. According to the rc.d scrpt for fuse, it should be unmounting all the partitions before shutdown --- and I think that script even runs (when I shutdown from a non-X environment, I see it's output). But several times, shutting down from X (so I don't see the output of shutdown scripts), I've ended up with corrupt ntfs partitions.
More information:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x746e756f
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc06d8f46
stack pointer = 0x28:0xe64189b0
frame pointer = 0x28:0xe64189b4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 843 (mount_fusefs)
panic: from debugger
cpuid = 0
KDB: stack backtrace:
Uptime: 1m34s
Physical memory: 1006 MB
Dumping 56 MB: 41 25 9
#0 doadump () at pcpu.h:195
195 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) where
#0 doadump () at pcpu.h:195
#1 0xc064f4fe in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:409
#2 0xc064f7bb in panic (fmt=Variable "fmt" is not available.
) at /usr/src/sys/kern/kern_shutdown.c:563
#3 0xc0465d47 in db_panic (addr=Could not find the frame base for
"db_panic".
) at /usr/src/sys/ddb/db_command.c:433
#4 0xc0466735 in db_command_loop () at /usr/src/sys/ddb/db_command.c:401
#5 0xc0467ea5 in db_trap (type=12, code=0) at
/usr/src/sys/ddb/db_main.c:222
#6 0xc0676b06 in kdb_trap (type=12, code=0, tf=0xe6418970) at
/usr/src/sys/kern/subr_kdb.c:502
#7 0xc085528f in trap_fatal (frame=0xe6418970, eva=1953396079) at
/usr/src/sys/i386/i386/trap.c:890
#8 0xc08554b0 in trap_pfault (frame=0xe6418970, usermode=0,
eva=1953396079) at /usr/src/sys/i386/i386/trap.c:812
#9 0xc0855e52 in trap (frame=0xe6418970) at
/usr/src/sys/i386/i386/trap.c:490
#10 0xc083c36b in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#11 0xc06d8f46 in strcmp (s1=0xc432044f "fspath", s2=0x746e756f
<Address
0x746e756f out of bounds>) at /usr/src/sys/libkern/strcmp.c:45
#12 0xc06c0865 in vfs_getopt (opts=0xc09bb700, name=0xc432044f
"fspath",
buf=0x0, len=0x0) at /usr/src/sys/kern/vfs_mount.c:1869
#13 0xc4319380 in ?? ()
#14 0xc09bb700 in w_data ()
#15 0xc432044f in ?? ()
#16 0x00000000 in ?? ()
#17 0x00000000 in ?? ()
#18 0xc43df210 in ?? ()
#19 0xc43df210 in ?? ()
#20 0xc09b1db0 in w_lock_list_free ()
#21 0xc43df210 in ?? ()
#22 0xe6418a00 in ?? ()
#23 0x00000246 in ?? ()
#24 0xc09b1db0 in w_lock_list_free ()
#25 0xe6418a1c in ?? ()
#26 0xc064279d in _mtx_unlock_spin_flags (m=0xc3e5707c,
opts=-1002573296, file=0xc08d01ce "/usr/src/sys/kern/vfs_mount.c",
line=1001)
at /usr/src/sys/kern/kern_mutex.c:246
#27 0xc06c34ad in vfs_donmount (td=0xc43df210, fsflags=0,
fsoptions=0xc439c900) at /usr/src/sys/kern/vfs_mount.c:1007
#28 0xc06c47a2 in nmount (td=0xc43df210, uap=0xe6418cfc) at
/usr/src/sys/kern/vfs_mount.c:416
#29 0xc0855783 in syscall (frame=0xe6418d38) at
/usr/src/sys/i386/i386/trap.c:1035
#30 0xc083c3d0 in Xint0x80_syscall () at
/usr/src/sys/i386/i386/exception.s:196
#31 0x00000033 in ?? ()
Previous frame inner to this frame (corrupt stack?)
(kgdb)
Ganbold wrote:> Hi,
>
> I'm having trouble mounting external NTFS hard drive using fusefs-ntfs
> port on Dell Latitude D620.
>
> devil# uname -an
> FreeBSD devil.micom.mng.net 7.0-PRERELEASE FreeBSD 7.0-PRERELEASE #3:
> Tue Feb 5 10:29:24 ULAT 2008
> tsgan@devil.micom.mng.net:/usr/obj/usr/src/sys/DEVIL i386
>
> devil# pkg_info | grep fuse
> fusefs-kmod-0.3.9.p1_3 Kernel module for fuse
> fusefs-libs-2.7.2 FUSE allows filesystem implementation in userspace
> fusefs-ntfs-1.1120 Mount NTFS partitions (read/write) and disk images
> devil# kldload /usr/local/modules/fuse.ko
> devil# kldstat
> Id Refs Address Size Name
> 1 23 0xc0400000 6df8b4 kernel
> 2 1 0xc0ae0000 14324 snd_hda.ko
> 3 2 0xc0af5000 52a08 sound.ko
> 4 2 0xc0b48000 10ebc drm.ko
> 5 1 0xc0b59000 7184 i915.ko
> 6 1 0xc0b61000 6b314 acpi.ko
> 7 2 0xc4005000 c000 ipfw.ko
> 8 1 0xc4035000 4000 ipdivert.ko
> 9 1 0xc406d000 22000 linux.ko
> 11 3 0xc43dd000 3000 ucom.ko
> 12 1 0xc43e0000 3000 uftdi.ko
> 13 1 0xc43e5000 4000 uplcom.ko
> 14 1 0xc59aa000 e000 fuse.ko
>
>
> When I try to mount it, on serial console I see:
> ..
> umass0: <Seagate FreeAgent Go, class 0/0, rev 2.00/0.00, addr 2> on
uhub4
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Seagate FreeAgent Go 100F> Fixed Direct Access SCSI-4 device
> da0: 40.000MB/s transfers
> da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 3f 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): ABORTED COMMAND asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 3f 0 0 1 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): ABORTED COMMAND asc:0,0
> (da0:umass-sim0:0:0:0): No additional sense information
> (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> GEOM_LABEL: Label for provider da0s1 is ntfs/FreeAgent Drive.
> GEOM_LABEL: Label ntfs/FreeAgent Drive removed.
>
>
> Fatal trap 12: page fault while in kernel mode
> cpuid = 1; apic id = 01
> fault virtual address = 0x746e756f
> fault code = supervisor read, page not present
> instruction pointer = 0x20:0xc06d8f36
> stack pointer = 0x28:0xe63d09b0
> frame pointer = 0x28:0xe63d09b4
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 19197 (mount_fusefs)
> [thread pid 19197 tid 100099 ]
> Stopped at strcmp+0x26: movzbl 0(%ecx),%eax
> db> bt
> Tracing pid 19197 tid 100099 td 0xc4312210
> strcmp(c59b644f,746e756f,c3e43934,2d,e63d0a8c,...) at strcmp+0x26
> vfs_getopt(c09bb6c0,c59b644f,0,0,c4312210,...) at vfs_getopt+0x35
> fuse_mount(c3e438b8,c4312210,c08d0185,3e9,0,...) at fuse_mount+0x70
> vfs_donmount(48217080,c,e63d0c70,c48e4000,bfbfebb4,...) at
> vfs_donmount+0x13ad
> nmount(c4312210,e63d0cfc,c,e63d0d38,c095e6d0,...) at nmount+0xb2
> syscall(e63d0d38) at syscall+0x2b3
> Xint0x80_syscall() at Xint0x80_syscall+0x20
> --- syscall (378, FreeBSD ELF32, nmount), eip = 0x480ccb4b, esp =
> 0xbfbfe64c, ebp = 0xbfbfebc8 ---
> db> trace
> Tracing pid 19197 tid 100099 td 0xc4312210
> strcmp(c59b644f,746e756f,c3e43934,2d,e63d0a8c,...) at strcmp+0x26
> vfs_getopt(c09bb6c0,c59b644f,0,0,c4312210,...) at vfs_getopt+0x35
> fuse_mount(c3e438b8,c4312210,c08d0185,3e9,0,...) at fuse_mount+0x70
> vfs_donmount(48217080,c,e63d0c70,c48e4000,bfbfebb4,...) at
> vfs_donmount+0x13ad
> nmount(c4312210,e63d0cfc,c,e63d0d38,c095e6d0,...) at nmount+0xb2
> syscall(e63d0d38) at syscall+0x2b3
> Xint0x80_syscall() at Xint0x80_syscall+0x20
> --- syscall (378, FreeBSD ELF32, nmount), eip = 0x480ccb4b, esp =
> 0xbfbfe64c, ebp = 0xbfbfebc8 ---
> db>
>
> Any idea how to solve this problem?
>
> thanks,
>
> Ganbold
>
--
"You boys lookin' for trouble?" "Sure. Whaddya got?" --
Marlon Brando,
"The Wild Ones"