Hi @List, i have tryed out the new coretemp driver for Intel Core CPU's my cpu is an T2400 Intel Core (w/o Duo). i have csup'ed the stable build from cvsup.uk.freebsd.org at this night. then built the entire system via sources ( with ULE-Scheduler, might this causes the stall?) then load the coretemp.ko with kldload and try to quest the temperature with sysctl -a|grep temperature.... after this, i put coretemp_load="YES" to my /boot/loader.conf up to this point all things are very good ( and the new release seems to me faster then 6.2) now with an new buildworld with cd /usr/src; make -j 8 buildworld >& ~/fbsd/mw.out & and in another xterm a sysctl -a |grep temp causes the system stalls. this error ist reproducable many times. now i have tryed the sysctl -a|grep temp during an buildworld w/o the coretemp module loaded and the system runs stable. i hope this informations help to fix. regards michael -- === m i c h a e l - s c h u h . n e t ==Michael Schuh Postfach 10 21 52 66021 Saarbr?cken phone: 0681/8319664 mobil: 0177/9738644 @: m i c h a e l . s c h u h @ g m a i l . c o m === Ust-ID: DE251072318 ===
At 09:01 AM 1/22/2008, Michael Schuh wrote:>Hi @List, > >i have tryed out the new coretemp driver for Intel Core CPU's >my cpu is an T2400 Intel Core (w/o Duo). >i have csup'ed the stable build from cvsup.uk.freebsd.org at this night. >then built the entire system via sources ( with ULE-Scheduler, mightIf you are running RELENG_6, I dont think ULE is recommended. If you want ULE, try going to RELENG_7. ---Mike