Hello Pyun,
This is a new server with latest RELENG_7 src and latest BIOS as well.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Mon Dec 3 23:37:27 UTC 2007
lomag@mx1.wearab.net:/usr/obj/usr/src/sys/MX1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4275109888 (4077 MB)
avail memory = 4106035200 (3915 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <INTEL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on
acpi0
acpi_hpet0: <High Precision Event Timer> iomem
0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc070-0xc077 mem
0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0200000-0xd02fffff
irq 16 at device 2.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xa000-0xa0ff mem
0xd0010000-0xd0010fff irq 21 at device 6.0 on pci4
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:30:ab:19:8b:c3
sis0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0xc060-0xc067,0xc050-0xc053,0xc040-0xc047,0xc030-0xc033,0xc020-0xc02f
irq 17 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
Timecounters tick every 1.000 msec
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master
SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
sis0: Applying short cable fix (reg=f5)
none1@pci0:3:0:0: class=0x020000 card=0xd6088086
chip=0x816810ec rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
Regards,
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/
____________________________________________________________________________________
Get easy, one-click access to your favorites.
Make Yahoo! your homepage.
http://www.yahoo.com/r/hs
On Mon, Dec 03, 2007 at 12:52:33PM -0800, Abdullah Ibn Hamad Al-Marri wrote:
> Hello Pyun,
>
> This is a new server with latest RELENG_7 src and latest BIOS as well.
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.0-BETA4 #0: Mon Dec 3 23:37:27 UTC 2007
> lomag@mx1.wearab.net:/usr/obj/usr/src/sys/MX1
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz
> K8-class CPU)
> Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> usable memory = 4275109888 (4077 MB)
> avail memory = 4106035200 (3915 MB)
> ACPI APIC Table: <INTEL DG31PR>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <INTEL> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on
> acpi0
> acpi_hpet0: <High Precision Event Timer> iomem
> 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xc070-0xc077 mem
> 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0200000-0xd02fffff
> irq 16 at device 2.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <network, ethernet> at device 0.0 (no driver attached)
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xa000-0xa0ff mem
> 0xd0010000-0xd0010fff irq 21 at device 6.0 on pci4
> sis0: Silicon Revision: DP83815D
> miibus0: <MII bus> on sis0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> sis0: Ethernet address: 00:30:ab:19:8b:c3
> sis0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 SATA300 controller> port
> 0xc060-0xc067,0xc050-0xc053,0xc040-0xc047,0xc030-0xc033,0xc020-0xc02f
> irq 17 at device 31.2 on pci0
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> acpi_button1: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
> acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
> on isa0
> Timecounters tick every 1.000 msec
> ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
> ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master
> SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
> sis0: Applying short cable fix (reg=f5)
>
>
> none1@pci0:3:0:0: class=0x020000 card=0xd6088086
> chip=0x816810ec rev=0x01 hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> class = network
> subclass = ethernet
>
Try attached patch. I think I posted similiar patches several times
to get feedback but I have never heard of success/failure.
--
Regards,
Pyun YongHyeon
-------------- next part --------------
Index: dev/re/if_re.c
==================================================================RCS file:
/home/ncvs/src/sys/dev/re/if_re.c,v
retrieving revision 1.98
diff -u -r1.98 if_re.c
--- dev/re/if_re.c 3 Dec 2007 01:28:08 -0000 1.98
+++ dev/re/if_re.c 4 Dec 2007 00:36:06 -0000
@@ -182,6 +182,8 @@
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2,
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
+ { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3,
+ "RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169,
"RealTek 8169 Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S,
@@ -223,6 +225,7 @@
{ RL_HWREV_8100E, RL_8169, "8100E"},
{ RL_HWREV_8101E, RL_8169, "8101E"},
{ RL_HWREV_8168_SPIN2, RL_8169, "8168"},
+ { RL_HWREV_8168_SPIN3, RL_8169, "8168"},
{ 0, 0, NULL }
};
@@ -683,13 +686,19 @@
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
- if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E ||
- hwrev == RL_HWREV_8168_SPIN1 || hwrev == RL_HWREV_8168_SPIN2) {
+ switch (hwrev) {
+ case RL_HWREV_8100E:
+ case RL_HWREV_8101E:
+ case RL_HWREV_8168_SPIN1:
+ case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1]));
CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0]));
- } else {
+ break;
+ default:
CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
+ break;
}
}
@@ -940,6 +949,9 @@
sc->rl_btag = rman_get_bustag(sc->rl_res);
sc->rl_bhandle = rman_get_bushandle(sc->rl_res);
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
+#if 1
+ printf("hwrev = %x\n", hwrev);
+#endif
bus_release_resource(dev, RL_RES,
RL_RID, sc->rl_res);
if (t->rl_basetype == hwrev) {
@@ -1320,6 +1332,7 @@
case RL_HWREV_8169_8110SB:
case RL_HWREV_8169_8110SC:
case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
re_gmii_writereg(dev, 1, 0x1f, 0);
re_gmii_writereg(dev, 1, 0x0e, 0);
break;
Index: pci/if_rlreg.h
==================================================================RCS file:
/home/ncvs/src/sys/pci/if_rlreg.h,v
retrieving revision 1.68
diff -u -r1.68 if_rlreg.h
--- pci/if_rlreg.h 26 Nov 2007 18:25:07 -0000 1.68
+++ pci/if_rlreg.h 4 Dec 2007 00:36:06 -0000
@@ -156,6 +156,7 @@
#define RL_HWREV_8100E 0x30800000
#define RL_HWREV_8101E 0x34000000
#define RL_HWREV_8168_SPIN2 0x38000000
+#define RL_HWREV_8168_SPIN3 0x38400000
#define RL_HWREV_8139 0x60000000
#define RL_HWREV_8139A 0x70000000
#define RL_HWREV_8139AG 0x70800000
Hello Pyun, ----- Original Message ----> From: Pyun YongHyeon <pyunyh@gmail.com> > To: Abdullah Ibn Hamad Al-Marri <wearabnet@yahoo.ca> > Cc: FreeBSD STABLE <freebsd-stable@freebsd.org> > Sent: Tuesday, December 4, 2007 3:44:53 AM > Subject: Re: Intel DG31PR and RTL8168/8111 issue > > On Mon, Dec 03, 2007 at 12:52:33PM -0800, Abdullah Ibn Hamad > Al-Marri >wrote:> > Hello Pyun, > > > > This is a new server with latest RELENG_7 src and latest BIOS > as >well.> > > > Copyright (c) 1992-2007 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > > 1994 > > The Regents of the University of California. All rights > > reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 7.0-BETA4 #0: Mon Dec 3 23:37:27 UTC 2007 > > lomag@mx1.wearab.net:/usr/obj/usr/src/sys/MX1 > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz > > K8-class CPU) > > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > >Features=0xbfebfbff> OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > >Features2=0xe3fd> > AMD Features=0x20100800 > > AMD Features2=0x1 > > Cores per package: 2 > > usable memory = 4275109888 (4077 MB) > > avail memory = 4106035200 (3915 MB) > > ACPI APIC Table: > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP): APIC ID: 1 > > ioapic0 irqs 0-23 on motherboard > > acpi0: on motherboard > > acpi0: [ITHREAD] > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on > > acpi0 > > acpi_hpet0: iomem > > 0xfed00000-0xfed003ff on acpi0 > > Timecounter "HPET" frequency 14318180 Hz quality 900 > > cpu0: on acpi0 > > est0: on cpu0 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 82a082a0600082a > > device_attach: est0 attach returned 6 > > p4tcc0: on cpu0 > > cpu1: on acpi0 > > est1: on cpu1 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 82a082a0600082a > > device_attach: est1 attach returned 6 > > p4tcc1: on cpu1 > > pcib0: port 0xcf8-0xcff on acpi0 > > pci0: on pcib0 > > pcib1: irq 16 at device 1.0 on pci0 > > pci1: on pcib1 > > vgapci0: port 0xc070-0xc077 mem > > 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0200000-0xd02fffff > > irq 16 at device 2.0 on pci0 > > pcib2: irq 16 at device 28.0 on pci0 > > pci2: on pcib2 > > pcib3: irq 17 at device 28.1 on pci0 > > pci3: on pcib3 > > pci3: at device 0.0 (no driver attached) > > pcib4: at device 30.0 on pci0 > > pci4: on pcib4 > > sis0: port 0xa000-0xa0ff mem > > 0xd0010000-0xd0010fff irq 21 at device 6.0 on pci4 > > sis0: Silicon Revision: DP83815D > > miibus0: on sis0 > > ukphy0: PHY 0 on miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > sis0: Ethernet address: 00:30:ab:19:8b:c3 > > sis0: [ITHREAD] > > isab0: at device 31.0 on pci0 > > isa0: on isab0 > > atapci0: port > > >0xc060-0xc067,0xc050-0xc053,0xc040-0xc047,0xc030-0xc033,0xc020-0xc02f> > irq 17 at device 31.2 on pci0 > > atapci0: [ITHREAD] > > ata2: on atapci0 > > ata2: [ITHREAD] > > ata3: on atapci0 > > ata3: [ITHREAD] > > pci0: at device 31.3 (no driver attached) > > acpi_button0: on acpi0 > > acpi_button1: on acpi0 > > atkbdc0: port 0x60,0x64 irq 1 on > > acpi0 > > atkbd0: irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > atkbd0: [ITHREAD] > > sc0: at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff > > on isa0 > > Timecounters tick every 1.000 msec > > ad4: 238475MB at ata2-master SATA150 > > ad6: 715404MB at ata3-master > > SATA150 > > SMP: AP CPU #1 Launched! > > Trying to mount root from ufs:/dev/ad4s1a > > sis0: Applying short cable fix (reg=f5) > > > > > > none1@pci0:3:0:0: class=0x020000 card=0xd6088086 > > chip=0x816810ec rev=0x01 hdr=0x00 > > vendor = 'Realtek Semiconductor' > > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > > class = network > > subclass = ethernet > > > > Try attached patch. I think I posted similiar patches several times > to get feedback but I have never heard of success/failure. > > -- > Regards, > Pyun YongHyeon > > > -----Inline Attachment Follows----- > > Index: dev/re/if_re.c > ==================================================================> RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v > retrieving revision 1.98 > diff -u -r1.98 if_re.c > --- dev/re/if_re.c 3 Dec 2007 01:28:08 -0000 1.98 > +++ dev/re/if_re.c 4 Dec 2007 00:36:06 -0000 > @@ -182,6 +182,8 @@ > "RealTek 8168/8111B PCIe Gigabit Ethernet" }, > { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2, > "RealTek 8168/8111B PCIe Gigabit Ethernet" }, > + { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3, > + "RealTek 8168/8111B PCIe Gigabit Ethernet" }, > { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169, > "RealTek 8169 Gigabit Ethernet" }, > { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S, > @@ -223,6 +225,7 @@ > { RL_HWREV_8100E, RL_8169, "8100E"}, > { RL_HWREV_8101E, RL_8169, "8101E"}, > { RL_HWREV_8168_SPIN2, RL_8169, "8168"}, > + { RL_HWREV_8168_SPIN3, RL_8169, "8168"}, > { 0, 0, NULL } > }; > > @@ -683,13 +686,19 @@ > > hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV; > > - if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E || > - hwrev == RL_HWREV_8168_SPIN1 || hwrev => RL_HWREV_8168_SPIN2) >{> + switch (hwrev) { > + case RL_HWREV_8100E: > + case RL_HWREV_8101E: > + case RL_HWREV_8168_SPIN1: > + case RL_HWREV_8168_SPIN2: > + case RL_HWREV_8168_SPIN3: > CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1])); > CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0])); > - } else { > + break; > + default: > CSR_WRITE_4(sc, RL_MAR0, hashes[0]); > CSR_WRITE_4(sc, RL_MAR4, hashes[1]); > + break; > } > } > > @@ -940,6 +949,9 @@ > sc->rl_btag = rman_get_bustag(sc->rl_res); > sc->rl_bhandle = rman_get_bushandle(sc->rl_res); > hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV; > +#if 1 > + printf("hwrev = %x\n", hwrev); > +#endif > bus_release_resource(dev, RL_RES, > RL_RID, sc->rl_res); > if (t->rl_basetype == hwrev) { > @@ -1320,6 +1332,7 @@ > case RL_HWREV_8169_8110SB: > case RL_HWREV_8169_8110SC: > case RL_HWREV_8168_SPIN2: > + case RL_HWREV_8168_SPIN3: > re_gmii_writereg(dev, 1, 0x1f, 0); > re_gmii_writereg(dev, 1, 0x0e, 0); > break; > Index: pci/if_rlreg.h > ==================================================================> RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v > retrieving revision 1.68 > diff -u -r1.68 if_rlreg.h > --- pci/if_rlreg.h 26 Nov 2007 18:25:07 -0000 1.68 > +++ pci/if_rlreg.h 4 Dec 2007 00:36:06 -0000 > @@ -156,6 +156,7 @@ > #define RL_HWREV_8100E 0x30800000 > #define RL_HWREV_8101E 0x34000000 > #define RL_HWREV_8168_SPIN2 0x38000000 > +#define RL_HWREV_8168_SPIN3 0x38400000 > #define RL_HWREV_8139 0x60000000 > #define RL_HWREV_8139A 0x70000000 > #define RL_HWREV_8139AG 0x70800000 > > > > -----Inline Attachment Follows----- >I tried this patch and it worked before I got the patch you sent. Index: dev/re/if_re.c ==================================================================RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v retrieving revision 1.95 diff -u -r1.95 if_re.c --- dev/re/if_re.c 14 Aug 2007 02:00:04 -0000 1.95 +++ dev/re/if_re.c 30 Oct 2007 01:05:06 -0000 @@ -180,6 +180,8 @@ "RealTek 8168/8111B PCIe Gigabit Ethernet" }, { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2, "RealTek 8168/8111B PCIe Gigabit Ethernet" }, + { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3, + "RealTek 8168/8111B PCIe Gigabit Ethernet" }, { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169, "RealTek 8169 Gigabit Ethernet" }, { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S, @@ -221,6 +223,7 @@ { RL_HWREV_8100E, RL_8169, "8100E"}, { RL_HWREV_8101E, RL_8169, "8101E"}, { RL_HWREV_8168_SPIN2, RL_8169, "8168"}, + { RL_HWREV_8168_SPIN3, RL_8169, "8168"}, { 0, 0, NULL } }; @@ -676,14 +679,18 @@ */ hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV; - - if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E || - hwrev == RL_HWREV_8168_SPIN1 || hwrev == RL_HWREV_8168_SPIN2) { + switch (hwrev) { + case RL_HWREV_8100E: + case RL_HWREV_8101E: + case RL_HWREV_8168_SPIN1: + case RL_HWREV_8168_SPIN2: CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1])); CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0])); - } else { + break; + default: CSR_WRITE_4(sc, RL_MAR0, hashes[0]); CSR_WRITE_4(sc, RL_MAR4, hashes[1]); + break; } } @@ -1314,6 +1321,7 @@ case RL_HWREV_8169_8110SB: case RL_HWREV_8169_8110SC: case RL_HWREV_8168_SPIN2: + case RL_HWREV_8168_SPIN3: re_gmii_writereg(dev, 1, 0x1f, 0); re_gmii_writereg(dev, 1, 0x0e, 0); break; Index: pci/if_rlreg.h ==================================================================RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v retrieving revision 1.67 diff -u -r1.67 if_rlreg.h --- pci/if_rlreg.h 24 Jul 2007 01:24:03 -0000 1.67 +++ pci/if_rlreg.h 30 Oct 2007 01:05:07 -0000 @@ -156,6 +156,7 @@ #define RL_HWREV_8100E 0x30800000 #define RL_HWREV_8101E 0x34000000 #define RL_HWREV_8168_SPIN2 0x38000000 +#define RL_HWREV_8168_SPIN3 0x38400000 #define RL_HWREV_8139 0x60000000 #define RL_HWREV_8139A 0x70000000 #define RL_HWREV_8139AG 0x70800000 I'll try the patch you sent too when the server reaches the ISP and being online. Do you have any comments? Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ ____________________________________________________________________________________ Get easy, one-click access to your favorites. Make Yahoo! your homepage. http://www.yahoo.com/r/hs
----- Original Message ----> From: Pyun YongHyeon <pyunyh@gmail.com> > To: Abdullah Ibn Hamad Al-Marri <wearabnet@yahoo.ca> > Cc: FreeBSD STABLE <freebsd-stable@freebsd.org> > Sent: Wednesday, December 5, 2007 2:43:08 PM > Subject: Re: Intel DG31PR and RTL8168/8111 issue > > On Tue, Dec 04, 2007 at 07:42:34AM -0800, Abdullah Ibn Hamad > Al-Marri >wrote:> > [...] > > > > > I'll try the patch you sent too when the server reaches the ISP > and >being online.> > > > Do you have any comments? > > > > The previous patch you used may have problems on multicast filtering. > I'm not sure but all PCIe based controller from RealTek swapped > multicast hash table register so it would be great if you can test > latest patch. > > -- > Regards, > Pyun YongHyeon >Heya Pyun! It looks ok to me, thank you did a great job! cd /usr/src/sys && patch < /sys/dev/re/re.spin3.patch Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: dev/re/if_re.c |==================================================================|RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v |retrieving revision 1.98 |diff -u -r1.98 if_re.c |--- dev/re/if_re.c 3 Dec 2007 01:28:08 -0000 1.98 |+++ dev/re/if_re.c 4 Dec 2007 00:36:06 -0000 -------------------------- Patching file dev/re/if_re.c using Plan A... Hunk #1 succeeded at 182. Hunk #2 succeeded at 225. Hunk #3 succeeded at 686. Hunk #4 succeeded at 949. Hunk #5 succeeded at 1332. Hmm... The next patch looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: pci/if_rlreg.h |==================================================================|RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v |retrieving revision 1.68 |diff -u -r1.68 if_rlreg.h |--- pci/if_rlreg.h 26 Nov 2007 18:25:07 -0000 1.68 |+++ pci/if_rlreg.h 4 Dec 2007 00:36:06 -0000 -------------------------- Patching file pci/if_rlreg.h using Plan A... Hunk #1 succeeded at 156. done FreeBSD 7.0-BETA4 #1: Thu Dec 6 19:07:31 UTC 2007 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.63-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4276064256 (4077 MB) avail memory = 4106997760 (3916 MB) ACPI APIC Table: <INTEL DG31PR> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard acpi0: <INTEL> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 82a082a0600082a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 82a082a0600082a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd070-0xd077 mem 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0100000-0xd01fffff irq 16 at device 2.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 hwrev = 38400000 hwrev = 38400000 hwrev = 38400000 hwrev = 38400000 hwrev = 38400000 hwrev = 38400000 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3 re0: Using 2 MSI messages miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:19:d1:a7:a4:72 re0: [FILTER] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150 ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a link_elf_obj: symbol sysctl__net_inet6_ip6_children undefined kldload: Unsupported file type re0: link state changed to UP re0@pci0:3:0:0: class=0x020000 card=0xd6088086 chip=0x816810ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet Shall I issue more commands and send it? Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs
Hello Pyun, ----- Original Message ----> From: Pyun YongHyeon <pyunyh@gmail.com> > To: Abdullah Ibn Hamad Al-Marri <wearabnet@yahoo.ca> > Cc: FreeBSD STABLE <freebsd-stable@freebsd.org> > Sent: Friday, December 7, 2007 4:01:42 AM > Subject: Re: Intel DG31PR and RTL8168/8111 issue > > On Thu, Dec 06, 2007 at 11:20:19AM -0800, Abdullah Ibn Hamad > Al-Marri >wrote:> > [...] > > > > > Shall I issue more commands and send it? > > > > I'd like to know whether multicat filtering really works on your > hardware. It would be even better if you can test it on IPv6 > environments. Just assign an IPv6 address to your re0 and send > a ICMPv6 node information DNS name query from other hosts. > For exmaple, 'ping6 -w ff02::1%foo0' command will report hostname > of host with re0 interface if multicast filtering works(Change > foo0 with interface instance of a driver.) > > -- > Regards, > Pyun YongHyeonI wish I could do that, but my ISP doesn't offer IPV6 space. Could you please make this patch in HEAD then mergge it to RELENG_7, so users with this nic wont drop FreeBSD 7.0 when it is out because the nic wont work out of box at least for IPV4 users. Again, I appreciate your help, and the great support for the community you offer. :-) Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs