Abdullah Ibn Hamad Al-Marri
2007-Oct-09 18:46 UTC
Realtek eth isn't detected in Intel DG31PR mobo
Hello Guys,
Maybe this is in HEAD? I'm not sure.
intel says "Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the
Realtek* RTL8111-GR Gigabit Ethernet Controller"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Sat Sep 8 03:21:29 AST 2007
root@web:/usr/obj/usr/src/sys/WEB
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,<b6>,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3210739712 (3062 MB)
avail memory = 3143385088 (2997 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <INTEL> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <display, VGA> at device 2.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
rl0: <Realtek RTL8168B PCI-E Gigabit Ethernet Adapter> port
0xc000-0xc0ff mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
rl0: [GIANT-LOCKED]
version:1.73
rl0: Ethernet address: 00:19:d1:a7:a4:72
rl0: Ethernet address: 00:19:d1:a7:a4:72
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f
irq 17 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding disabled,
default to accept, logging limited to 10000 packets/entry by default
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
rl0@pci3:0:0: class=0x020000 card=0xd6088086 chip=0x816810ec rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor'
class = network
subclass = ethernet
So I used Realtek driver to get it working.
=================================================================================
Realtek 8139C/8139C+/8169S/8169SB/8169SC/8168B/8101E Driver for
FreeBSD v4.x/5.x/6.0
================================================================================
shouldn't be re0 instead of rl0?
Could someone please look into it, Pyun?
--
Regards,
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/
On Wed, Oct 10, 2007 at 04:46:50AM +0300, Abdullah Ibn Hamad Al-Marri wrote:
> Hello Guys,
>
> Maybe this is in HEAD? I'm not sure.
>
> intel says "Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the
> Realtek* RTL8111-GR Gigabit Ethernet Controller"
>
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-STABLE #0: Sat Sep 8 03:21:29 AST 2007
> root@web:/usr/obj/usr/src/sys/WEB
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz
686-class CPU)
> Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,<b6>,EST,TM2,<b9>,CX16,<b14>,<b15>>
> AMD Features=0x20100000<NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> real memory = 3210739712 (3062 MB)
> avail memory = 3143385088 (2997 MB)
> ACPI APIC Table: <INTEL DG31PR>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <INTEL> on motherboard
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 2000
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci0: <display, VGA> at device 2.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib3
> rl0: <Realtek RTL8168B PCI-E Gigabit Ethernet Adapter> port
> 0xc000-0xc0ff mem 0xd0020000-0xd0020fff irq 17 at device 0.0 on pci3
> rl0: [GIANT-LOCKED]
> version:1.73
> rl0: Ethernet address: 00:19:d1:a7:a4:72
> rl0: Ethernet address: 00:19:d1:a7:a4:72
> pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 SATA300 controller> port
> 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f
> irq 17 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> acpi_button1: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd0: [GIANT-LOCKED]
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> Timecounters tick every 1.000 msec
> ipfw2 initialized, divert loadable, rule-based forwarding disabled,
> default to accept, logging limited to 10000 packets/entry by default
> ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
> ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s1a
>
> rl0@pci3:0:0: class=0x020000 card=0xd6088086 chip=0x816810ec rev=0x01
hdr=0x00
> vendor = 'Realtek Semiconductor'
> class = network
> subclass = ethernet
>
> So I used Realtek driver to get it working.
>
>
================================================================================
> = Realtek 8139C/8139C+/8169S/8169SB/8169SC/8168B/8101E Driver for
> FreeBSD v4.x/5.x/6.0 >
================================================================================
>
> shouldn't be re0 instead of rl0?
>
> Could someone please look into it, Pyun?
Try attached patch.
I've touched rl(4) too because rl(4) should not attach to
unsupported hardwares.
--
Regards,
Pyun YongHyeon
-------------- next part --------------
Index: if_re.c
==================================================================RCS file:
/home/ncvs/src/sys/dev/re/if_re.c,v
retrieving revision 1.95
diff -u -r1.95 if_re.c
--- if_re.c 14 Aug 2007 02:00:04 -0000 1.95
+++ if_re.c 10 Oct 2007 02:54:15 -0000
@@ -180,6 +180,8 @@
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2,
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
+ { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3,
+ "RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169,
"RealTek 8169 Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S,
@@ -221,6 +223,7 @@
{ RL_HWREV_8100E, RL_8169, "8100E"},
{ RL_HWREV_8101E, RL_8169, "8101E"},
{ RL_HWREV_8168_SPIN2, RL_8169, "8168"},
+ { RL_HWREV_8168_SPIN3, RL_8169, "8168"},
{ 0, 0, NULL }
};
@@ -676,14 +679,19 @@
*/
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
-
- if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E ||
- hwrev == RL_HWREV_8168_SPIN1 || hwrev == RL_HWREV_8168_SPIN2) {
+ switch (hwrev) {
+ case RL_HWREV_8100E:
+ case RL_HWREV_8101E:
+ case RL_HWREV_8168_SPIN1:
+ case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1]));
CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0]));
- } else {
+ break;
+ default:
CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
+ break;
}
}
@@ -1314,6 +1322,7 @@
case RL_HWREV_8169_8110SB:
case RL_HWREV_8169_8110SC:
case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
re_gmii_writereg(dev, 1, 0x1f, 0);
re_gmii_writereg(dev, 1, 0x0e, 0);
break;
Index: ../../pci/if_rlreg.h
==================================================================RCS file:
/home/ncvs/src/sys/pci/if_rlreg.h,v
retrieving revision 1.67
diff -u -r1.67 if_rlreg.h
--- ../../pci/if_rlreg.h 24 Jul 2007 01:24:03 -0000 1.67
+++ ../../pci/if_rlreg.h 10 Oct 2007 02:54:16 -0000
@@ -156,6 +156,7 @@
#define RL_HWREV_8100E 0x30800000
#define RL_HWREV_8101E 0x34000000
#define RL_HWREV_8168_SPIN2 0x38000000
+#define RL_HWREV_8168_SPIN3 0x38400000
#define RL_HWREV_8139 0x60000000
#define RL_HWREV_8139A 0x70000000
#define RL_HWREV_8139AG 0x70800000
Index: ../../pci/if_rl.c
==================================================================RCS file:
/home/ncvs/src/sys/pci/if_rl.c,v
retrieving revision 1.170
diff -u -r1.170 if_rl.c
--- ../../pci/if_rl.c 24 Jul 2007 01:24:03 -0000 1.170
+++ ../../pci/if_rl.c 10 Oct 2007 02:54:16 -0000
@@ -756,14 +756,31 @@
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res);
- /* Don't attach to 8139C+ or 8169/8110 chips. */
- if (hwrev == RL_HWREV_8139CPLUS ||
- (hwrev == RL_HWREV_8169 &&
- t->rl_did == RT_DEVICEID_8169) ||
- hwrev == RL_HWREV_8169S ||
- hwrev == RL_HWREV_8110S) {
+ /*
+ * Don't attach to 8139C+/8169/8169S/8110S/8168
+ * 8111/8101E chips.
+ */
+ switch (hwrev) {
+ case RL_HWREV_8139CPLUS:
+ case RL_HWREV_8110S:
+ case RL_HWREV_8169S:
+ case RL_HWREV_8101:
+ case RL_HWREV_8100:
+ case RL_HWREV_8169_8110SB:
+ case RL_HWREV_8169_8110SC:
+ case RL_HWREV_8168_SPIN1:
+ case RL_HWREV_8100E:
+ case RL_HWREV_8101E:
+ case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
t++;
continue;
+ case RL_HWREV_8169:
+ if (t->rl_did == RT_DEVICEID_8169) {
+ t++;
+ continue;
+ }
+ break;
}
device_set_desc(dev, t->rl_name);