Hello. We have a very stange problem with "LSILogic 1030 Ultra4 Adapter". There is an information about it: mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xdc120000-0xdc13ffff,0xdc100000-0xdc11ffff irq 18 at device 3.0 on pci3 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 Everything works fine, but time to time disk operations hangs and we have this messages in log: mpt0: request 0xc4bd81f0:196 timed out for ccb 0xc4dedc00 (req->ccb 0xc4dedc00) mpt0: attempting to abort req 0xc4bd81f0:196 function 0 mpt0: completing timedout/aborted req 0xc4bd81f0:196 mpt0: abort of req 0xc4bd81f0:0 completed mpt0: request 0xc4bd8220:198 timed out for ccb 0xc4dedc00 (req->ccb 0xc4dedc00) mpt0: attempting to abort req 0xc4bd8220:198 function 0 mpt0: mpt_wait_req(1) timed out mpt0: mpt_recover_commands: abort timed-out. Resetting controller mpt0: mpt_cam_event: 0x0 mpt0: completing timedout/aborted req 0xc4bd8220:198 (da0:mpt0:0:0:0): lost device (da0:mpt0:0:0:0): Invalidating pack (da0:mpt0:0:0:0): Synchronize cache failed, status == 0x4a, scsi status == 0x0 (da0:mpt0:0:0:0): removing device entry SCSI-bus connected to Areca RAID-controller and this controller works fine with MS Windows. -- V.Melnik