thr3ads.net - freebsd stable - Dual Core Problems [Jul 2007]

If this information is useful, please help other people find it:
Share via:

Ivaylo Mateev

2007-Jul-10 10:48 UTC

Dual Core Problems

Hi!

FreeBSD Stable can not detect my dual core CPU correctly. It uses  
only one core.

and

ACPI is not working corectly. When i type shutdown -h now, the  
Computer do not power off, but stay on with the Uptime massage

Thanx for the help

Stefan Lambrev

2007-Jul-10 10:53 UTC

head link

Dual Core Problems

Ivaylo Mateev wrote:> Hi!
>
> FreeBSD Stable can not detect my dual core CPU correctly. It uses only 
> one core.
>
> and
>
> ACPI is not working corectly. When i type shutdown -h now, the 
> Computer do not power off, but stay on with the Uptime massage
>
> Thanx for the helpWich version, what hardware ?
uname -a , dmesg ? Little more info please.>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
-- 

Best Wishes,
Stefan Lambrev
ICQ# 24134177

Kim Attree

2007-Jul-10 11:02 UTC

head link

Dual Core Problems

Ivaylo,

Have you compiled in SMP and ACPI support to your kernel ?

Thanks

Kim

Ivaylo Mateev wrote:> Hi!
>
> FreeBSD Stable can not detect my dual core CPU correctly. It uses only
> one core.
>
> and
>
> ACPI is not working corectly. When i type shutdown -h now, the
> Computer do not power off, but stay on with the Uptime massage
>
> Thanx for the help
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"

Ivaylo Mateev

2007-Jul-10 11:36 UTC

head link

Dual Core Problems

SMP  compiled ???
UUpss I just looked in my kernel config file. .... SMP was  
commented .... I tought I uncommented after I added it , but ..... so  
SMP is up and running, but the ACPI Problem still exists.

acpi.ko loaded

uname -a:

FreeBSD heavymetal 6.2-STABLE FreeBSD 6.2-STABLE #4: Tue Jul 10  
14:46:47 CEST 2007 root@:/usr/obj/usr/src/sys/HEAVYMETAL i386

hier dmesg

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #4: Tue Jul 10 14:46:47 CEST 2007
     root@:/usr/obj/usr/src/sys/HEAVYMETAL
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2375.02-MHz 686- 
class CPU)
   Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
    
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
   AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
   Cores per package: 2
real memory  = 804192256 (766 MB)
avail memory = 769056768 (733 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff  
on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 2000
acpi0: Power Button (fixed)
acpi0: reservation of feff0000, 100 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq  
21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff  
irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq  
23 at device 4.0 on pci0
ohci1: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff  
irq 20 at device 4.1 on pci0
ehci1: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci1
usb3: USB revision 2.0
uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
atapci0: <GENERIC ATA controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <NVidia (Unknown) High Definition Audio Controller> mem  
0xfe020000-0xfe023fff irq 21 at device 7.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci1: <GENERIC ATA controller> port  
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem  
0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem  
0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq  
23 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
1000baseTX-FDX, auto
nfe0: Ethernet address: 00:50:8d:9f:27:19
nfe0: [FAST]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci8: <ACPI PCI bus> on pcib8
nvidia0: <GeForce 7025 / NVIDIA nForce 630a> mem  
0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq  
20 at device 18.0 on pci0
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DV-516GA/G4S3> at ata0-master UDMA33
ad7: 152627MB <SAMSUNG HD161HJ JF100-15> at ata3-slave UDMA33
pcm0: <HDA Codec: Realtek ALC888>
pcm0: <HDA Driver Revision: 20070619_0045>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad7s1a
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash TS1GJFV10 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)

Ivaylo Mateev

2007-Jul-10 11:58 UTC

head link

Dual Core Problems

It is not working :(

On 10.07.2007, at 13:47, S?ren Klintrup wrote:
> Ivaylo Mateev wrote:
>
>> ACPI is not working corectly. When i type shutdown -h now, the  
>> Computer do not power off, but stay on with the Uptime massage
>
> you need to use 'shutdown -p now' to power off the system.
>
> read shutdown(8) for more
>
> /S?ren
>

Søren Klintrup

2007-Jul-10 12:01 UTC

head link

Dual Core Problems

Ivaylo Mateev wrote:
> ACPI is not working corectly. When i type shutdown -h now, the Computer 
> do not power off, but stay on with the Uptime massage
you need to use 'shutdown -p now' to power off the system.

read shutdown(8) for more

/S?ren

Paig Chong Woo

2007-Jul-10 12:17 UTC

head link

Dual Core Problems

Le 10 juil. 2007 ? 12:24, Ivaylo Mateev a ?crit :
> Hi!
>
> FreeBSD Stable can not detect my dual core CPU correctly. It uses  
> only one core.
>
> and
>
> ACPI is not working corectly. When i type shutdown -h now, the  
> Computer do not power off, but stay on with the Uptime massage
shutdown -h halts the system, and keeps it powered. You're looking  
for shutdown -p, which halts the system and powers it off (with  
proper hardware support).
>
> Thanx for the help
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable- 
> unsubscribe@freebsd.org"

-- 

PAIG Chong Woo.

Søren Klintrup

2007-Jul-10 12:19 UTC

head link

Dual Core Problems

Ivaylo Mateev wrote:
> ACPI is not working corectly. When i type shutdown -h now, the Computer 
> do not power off, but stay on with the Uptime massage
you need to use 'shutdown -p now' to power off the system.

read shutdown(8) for more

/S?ren

Jeremy Chadwick

2007-Jul-10 12:40 UTC

head link

Dual Core Problems

On Tue, Jul 10, 2007 at 01:35:38PM +0200, Ivaylo Mateev
wrote:>  SMP  compiled ???
>  UUpss I just looked in my kernel config file. .... SMP was commented ....
I
>  tought I uncommented after I added it , but ..... so SMP is up and
running,
>  but the ACPI Problem still exists.
Try setting one of these via sysctl {variable}=1 then using
shutdown -p now as instructed.

$ sysctl -d hw.acpi.disable_on_reboot
hw.acpi.disable_on_reboot: Disable ACPI when rebooting/halting system
$ sysctl -d hw.acpi.handle_reboot
hw.acpi.handle_reboot: Use ACPI Reset Register to reboot

Likely one of these will help you.

-- 
| Jeremy Chadwick                                    jdc at parodius.com |
| Parodius Networking                           http://www.parodius.com/ |
| UNIX Systems Administrator                      Mountain View, CA, USA |
| Making life hard for others since 1977.                  PGP: 4BD6C0CB |

Jeremy Chadwick

2007-Jul-10 14:20 UTC

head link

Dual Core Problems

On Tue, Jul 10, 2007 at 02:52:40PM +0200, Ivaylo Mateev
wrote:> On 10.07.2007, at 14:40, Jeremy Chadwick wrote:
> > Try setting one of these via sysctl {variable}=1 then using
> > shutdown -p now as instructed.
> >
> > $ sysctl -d hw.acpi.disable_on_reboot
> > hw.acpi.disable_on_reboot: Disable ACPI when rebooting/halting system
> > $ sysctl -d hw.acpi.handle_reboot
> > hw.acpi.handle_reboot: Use ACPI Reset Register to reboot
> 
>  ;(
> 
>  No not working :(
Sorry, I don't have any other ideas; someone more familiar with ACPI
will have to chime in here.

Also, please keep freebsd-stable@freebsd.org CC'd when replying, so that
others know previously-recommended solutions did not work.  :-)  Thanks.

-- 
| Jeremy Chadwick                                    jdc at parodius.com |
| Parodius Networking                           http://www.parodius.com/ |
| UNIX Systems Administrator                      Mountain View, CA, USA |
| Making life hard for others since 1977.                  PGP: 4BD6C0CB |

freebsd stable - Jul 2007 - Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems

Dual Core Problems