Jason Chang 張傑生
2007-Apr-18 11:35 UTC
bge watchdog timeout -- resetting problem on recent update
Dear All,
After recent cvsup and make world, my server suffered from the
bge watchdog timeout -- resetting problem. Manually revert the
bge related source to older version and compiled a new kernel
may solve the problem. So I guess the recent committed source
does not go well with bge nics onboard of IBM e326m servers.
1. server model
IBM e326m server with dual AMD opteron cpus
http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-61692
bge chipset is Broadcom BCM5714 B3, ASIC rev. 0x8003
2. senario
large network i/o results in error:
bge0: watchdog timeout -- resetting
bge0: link DOWN
bge0: link state changed to DOWN
bge0: link UP
bge0: link state changed to UP
3. how to reproduce
just ftp a file larger then 20mb, and the bge will have trouble in 30sec.
4. source version verified to work abnormally.
if_bge.c 1.91.2.22
if_bgereg.h 1.36.2.10
brgphy.c 1.34.2.13
5. source version verified to work normally.
if_bge.c 1.91.2.19
if_bgereg.h 1.36.2.9
brgphy.c 1.34.2.12
6. system dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #13: Sat Apr 14 10:57:10 CST 2007
root@ccsun52.cc.ntu.edu.tw:/usr/src/sys/amd64/compile/CCSUN52
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8061a000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <AMD BLAST >
Calibrating clock(s) ... i8254 clock: 1193293 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793019707 Hz
CPU: AMD Opteron(tm) Processor 254 (2793.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2146828288 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages)
0x0000000000717000 - 0x000000007c2fcfff, 2076073984 bytes (506854 pages)
avail memory = 2066284544 (1970 MB)
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 5, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 6, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
ichwd module loaded
io: <I/O>
acpi0: <AMD XSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: Power Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x80016844
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 [class=060400] [hdr=01] is there (id=00361166)
AcpiOsDerivePciId: bus 0 dev 24 func 1
unknown: I/O range not supported
ACPI timer: 0/4 0/5 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10 11
Validation 0 10 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 7 10 11
Validation 0 255 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9 11
Validation 0 255 N 0 9 11
After Disable 0 255 N 0 9 11
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9 11
Validation 0 255 N 0 9 11
After Disable 0 255 N 0 9 11
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link33: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link34: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
powernow0: STATUS: 0x4060604141414
powernow0: STATUS: maxfid: 0x14
powernow0: STATUS: maxvid: 0x04
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
powernow1: STATUS: 0x4060604141414
powernow1: STATUS: maxfid: 0x14
powernow1: STATUS: maxvid: 0x04
device_attach: powernow1 attach returned 6
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.3.INTA at func 0: 10
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
bus=0, slot=2, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
bus=0, slot=2, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00002000, size 4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
bus=0, slot=2, func=2
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8011000, size 12, enabled
map[14]: type 4, range 32, base 00001000, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e8012000, size 12, enabled
map[14]: type 4, range 32, base 00001400, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
bus=0, slot=3, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8013000, size 12, enabled
map[14]: type 4, range 32, base 00001800, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1002, dev=0x515e, revid=0x01
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0183, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 4, range 32, base 00001c00, size 8, enabled
map[18]: type 1, range 32, base e8000000, size 16, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x1166, dev=0x0130, revid=0xa3
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x0130, revid=0xa3
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
bus=0, slot=8, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 2
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xe8100000-0xe81fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1166, dev=0x0104, revid=0xb2
bus=1, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x3000-0x3fff
pcib2: memory decode 0xe8100000-0xe81fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1000, dev=0x0030, revid=0x08
bus=2, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib2: requested I/O range 0x3000-0x30ff: in range
pcib1: requested I/O range 0x3000-0x30ff: in range
map[14]: type 1, range 64, base e8120000, size 17, enabled
pcib2: requested memory range 0xe8120000-0xe813ffff: good
pcib1: requested memory range 0xe8120000-0xe813ffff: good
map[1c]: type 1, range 64, base e8100000, size 17, enabled
pcib2: requested memory range 0xe8100000-0xe811ffff: good
pcib1: requested memory range 0xe8100000-0xe811ffff: good
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 18
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem
0xe8120000-0xe813fff
f,0xe8100000-0xe811ffff irq 18 at device 3.0 on pci2
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xe8120000
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
atapci0: <ServerWorks HT1000 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x
177,0x376,0x2000-0x200f at device 2.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem
0xe8011000-0xe8011
fff irq 10 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8011000
ohci0: (New OHCI DeviceId=0x02231166)
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem
0xe8012000-0xe8012
fff irq 10 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8012000
ohci1: (New OHCI DeviceId=0x02231166)
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem
0xe8013000-0xe
8013fff irq 10 at device 3.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8013000
ehci0: (New EHCI DeviceId=0x02231166)
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xe8200000-0xe82fffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x14e4, dev=0x166a, revid=0x03
bus=4, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base e8210000, size 16, enabled
pcib4: requested memory range 0xe8210000-0xe821ffff: good
map[18]: type 1, range 64, base e8200000, size 16, enabled
pcib4: requested memory range 0xe8200000-0xe820ffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 26
found-> vendor=0x14e4, dev=0x166a, revid=0x03
bus=4, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base e8230000, size 16, enabled
pcib4: requested memory range 0xe8230000-0xe823ffff: good
map[18]: type 1, range 64, base e8220000, size 16, enabled
pcib4: requested memory range 0xe8220000-0xe822ffff: good
pcib4: matched entry for 4.4.INTB
pcib4: slot 4 INTB hardwired to IRQ 27
bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem
0xe8210000-0xe821ffff,0xe82000
00-0xe820ffff irq 26 at device 4.0 on pci4
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8210000
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:11:25:c4:1d:62
ioapic1: routing intpin 10 (PCI IRQ 26) to vector 53
bge0: [MPSAFE]
bge1: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem
0xe8230000-0xe823ffff,0xe82200
00-0xe822ffff irq 27 at device 4.1 on pci4
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8230000
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:11:25:c4:1d:63
ioapic1: routing intpin 11 (PCI IRQ 27) to vector 54
bge1: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xfff00000-0xfffff
pcib7: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib8: secondary bus 8
pcib8: subordinate bus 8
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfff00000-0xfffff
pcib8: prefetched decode 0xfff00000-0xfffff
pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.EXB4 - AE_NOT_F
OUND
pci8: <ACPI PCI bus> on pcib8
pci8: physical bus=8
pcib9: <ACPI Host-PCI bridge> on acpi0
pcib9: reading config registers from 0:25:0
pcib9: couldn't read bus number from cfg space
pcib9: trying bus number 9
pcib9: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib9
pci9: physical bus=9
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: ATEN UC-10KM V1.3.121, rev 1.10/1.00, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
Device configuration finished.
Reducing kern.maxvnodes 130867 -> 100000
lapic: Divisor 2, Frequency 99750465 hz
Timecounter "TSC" frequency 2793019707 Hz quality -100
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to d
eny, logging limited to 100 packets/entry by default
lo0: bpf attached
Waiting 3 seconds for SCSI devices to settle
(xpt0:mpt0:0:-1:-1): reset bus
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ipmi0: IPMI device rev. 1, firmware rev. 1.81, version 1.5
ipmi0: Number of channels 3
ipmi0: Attached watchdog
(probe1:mpt0:1:0:0): error 22
(probe1:mpt0:1:0:0): Unretryable Error
(probe1:mpt0:1:1:0): error 22
(probe1:mpt0:1:1:0): Unretryable Error
(probe1:mpt0:1:2:0): error 22
(probe1:mpt0:1:2:0): Unretryable Error
(probe1:mpt0:1:3:0): error 22
(probe1:mpt0:1:3:0): Unretryable Error
(probe1:mpt0:1:4:0): error 22
(probe1:mpt0:1:4:0): Unretryable Error
(probe1:mpt0:1:5:0): error 22
(probe1:mpt0:1:5:0): Unretryable Error
(probe0:mpt0:0:0:0): Retrying Command
(probe0:mpt0:0:1:0): Retrying Command
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
pass0: Serial Number 3KT4A4RN00007640LBTT
pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
bled
pass1 at mpt0 bus 0 target 1 lun 0
pass1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
pass1: Serial Number 3KT4DDM700007640LDQE
pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
bled
pass2 at mpt0 bus 0 target 8 lun 0
pass2: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
pass2: Serial Number 1
pass2: 3.300MB/s transfers
pt0 at mpt0 bus 0 target 8 lun 0
pt0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
pt0: Serial Number 1
pt0: 3.300MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 10 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic1: Assigning PCI IRQ 18 to local APIC 0
ioapic1: Assigning PCI IRQ 26 to local APIC 1
ioapic1: Assigning PCI IRQ 27 to local APIC 0
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
da0: Serial Number 3KT4A4RN00007640LBTT
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
ed
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device
da1: Serial Number 3KT4DDM700007640LDQE
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
ed
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
Thanks for your time.
Sincerely,
Jason Chang
Tom Evans
2007-Apr-18 12:26 UTC
bge watchdog timeout -- resetting problem on recent update
On Wed, 2007-04-18 at 17:38 +0800, Jason Chang ??? wrote:> Dear All, > > After recent cvsup and make world, my server suffered from the > bge watchdog timeout -- resetting problem. Manually revert the > bge related source to older version and compiled a new kernel > may solve the problem. So I guess the recent committed source > does not go well with bge nics onboard of IBM e326m servers.Hi Jason Can you add hw.pci.enable_msi=0 hw.pci.enable_msix=0 to /boot/loader.conf and reboot and see if that solves the problem. I saw this problem a while ago on my -CURRENT with a misbehaving MSI on my motherboard. (I may have this completely wrong; I'm not even 100% sure the MSI stuff has been MFC'ed to -STABLE). Cheers Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070418/f4d38b65/attachment.pgp
Jason Chang
2007-May-01 09:59 UTC
bge watchdog timeout -- resetting problem on recent update
Dear All, After further testing, we concluded that 1. sysctl hw.pci.enable_msi hw.pci.enable_msix does not change the result. bge still timeout. 2. using latest(2007/04) 7-current source does not have this problem. 3. we are very sure the problem results from if_bge.c 1.91.2.21 if_bgereg.h 1.36.2.10 brgphy.c 1.34.2.13 which are all commited at 2007/03/21 22:53 Please help to check the source code and find out why it affects bge (BCM 5704 and 5714) network nics. Thanks very much. Sincerely, Jason Chang ?? <f0504h$b9q$1@FreeBSD.csie.nctu.edu.tw> ?????:> > Dear All, > > After recent cvsup and make world, my server suffered from the > bge watchdog timeout -- resetting problem. Manually revert the > bge related source to older version and compiled a new kernel > may solve the problem. So I guess the recent committed source > does not go well with bge nics onboard of IBM e326m servers. > > 1. server model > IBM e326m server with dual AMD opteron cpus > http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-61692 > bge chipset is Broadcom BCM5714 B3, ASIC rev. 0x8003 > > 2. senario > large network i/o results in error: > bge0: watchdog timeout -- resetting > bge0: link DOWN > bge0: link state changed to DOWN > bge0: link UP > bge0: link state changed to UP > > 3. how to reproduce > just ftp a file larger then 20mb, and the bge will have trouble in 30sec. > > 4. source version verified to work abnormally. > if_bge.c 1.91.2.22 > if_bgereg.h 1.36.2.10 > brgphy.c 1.34.2.13 > > 5. source version verified to work normally. > if_bge.c 1.91.2.19 > if_bgereg.h 1.36.2.9 > brgphy.c 1.34.2.12 > > 6. system dmesg: > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-STABLE #13: Sat Apr 14 10:57:10 CST 2007 > root@ccsun52.cc.ntu.edu.tw:/usr/src/sys/amd64/compile/CCSUN52 > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8061a000. > INTR: Adding local APIC 0 as a target > ACPI APIC Table: <AMD BLAST > > Calibrating clock(s) ... i8254 clock: 1193293 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2793019707 Hz > CPU: AMD Opteron(tm) Processor 254 (2793.02-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1 > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM > OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > Features2=0x1<SSE3> > AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> > AMD Features2=0x1<LAHF> > L1 2MB data TLB: 8 entries, fully associative > L1 2MB instruction TLB: 8 entries, fully associative > L1 4KB data TLB: 32 entries, fully associative > L1 4KB instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 2MB unified TLB: 0 entries, disabled/not present > L2 4KB data TLB: 512 entries, 4-way associative > L2 4KB instruction TLB: 512 entries, 4-way associative > L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative > real memory = 2146828288 (2047 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages) > 0x0000000000717000 - 0x000000007c2fcfff, 2076073984 bytes (506854 pages) > avail memory = 2066284544 (1970 MB) > INTR: Adding local APIC 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Found IO APIC ID 5, Interrupt 16 at 0xfec01000 > MADT: Found IO APIC ID 6, Interrupt 32 at 0xfec02000 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0: intpin 9 polarity: low > ioapic0: intpin 9 trigger: level > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > mem: <memory> > ichwd module loaded > io: <I/O> > acpi0: <AMD XSDT> on motherboard > ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 > acpi0: [MPSAFE] > acpi0: Power Button (fixed) > pci_open(1): mode 1 addr port (0x0cf8) is 0x80016844 > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 1 [class=060400] [hdr=01] is there (id=00361166) > AcpiOsDerivePciId: bus 0 dev 24 func 1 > unknown: I/O range not supported > ACPI timer: 0/4 0/5 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/4 -> 0 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 10 11 > Validation 0 10 N 0 10 11 > After Disable 0 255 N 0 10 11 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 10 11 > Validation 0 255 N 0 10 11 > After Disable 0 255 N 0 10 11 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 10 11 > Validation 0 255 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 5 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 9 11 > Validation 0 255 N 0 9 11 > After Disable 0 255 N 0 9 11 > pci_link8: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 9 11 > Validation 0 255 N 0 9 11 > After Disable 0 255 N 0 9 11 > pci_link9: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link10: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link11: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link12: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link13: Index IRQ Rtd Ref IRQs > Initial Probe 0 7 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 7 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link14: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link15: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link16: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link17: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link18: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link19: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link20: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link21: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link22: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link23: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link24: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link25: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link26: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link27: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link28: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link29: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link30: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link31: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link32: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link33: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link34: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > cpu0: <ACPI CPU> on acpi0 > cpu0: switching to generic Cx mode > powernow0: <Cool`n'Quiet K8> on cpu0 > powernow0: STATUS: 0x4060604141414 > powernow0: STATUS: maxfid: 0x14 > powernow0: STATUS: maxvid: 0x04 > device_attach: powernow0 attach returned 6 > cpu1: <ACPI CPU> on acpi0 > powernow1: <Cool`n'Quiet K8> on cpu1 > powernow1: STATUS: 0x4060604141414 > powernow1: STATUS: maxfid: 0x14 > powernow1: STATUS: maxvid: 0x04 > device_attach: powernow1 attach returned 6 > pcib0: <ACPI Host-PCI bridge> on acpi0 > ACPI: Found matching pin for 0.3.INTA at func 0: 10 > pci0: <ACPI PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x1166, dev=0x0036, revid=0x00 > bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0205, revid=0x00 > bus=0, slot=2, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0214, revid=0x00 > bus=0, slot=2, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=1 > cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > powerspec 2 supports D0 D3 current D0 > map[20]: type 4, range 32, base 00002000, size 4, enabled > found-> vendor=0x1166, dev=0x0234, revid=0x00 > bus=0, slot=2, func=2 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0223, revid=0x01 > bus=0, slot=3, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base e8011000, size 12, enabled > map[14]: type 4, range 32, base 00001000, size 8, enabled > pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) > ioapic0: Changing trigger for pin 10 to level > ioapic0: Changing polarity for pin 10 to low > pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU > found-> vendor=0x1166, dev=0x0223, revid=0x01 > bus=0, slot=3, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type 1, range 32, base e8012000, size 12, enabled > map[14]: type 4, range 32, base 00001400, size 8, enabled > pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) > pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU > found-> vendor=0x1166, dev=0x0223, revid=0x01 > bus=0, slot=3, func=2 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base e8013000, size 12, enabled > map[14]: type 4, range 32, base 00001800, size 8, enabled > pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0) > pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU > found-> vendor=0x1002, dev=0x515e, revid=0x01 > bus=0, slot=4, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0183, statreg=0x0290, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 3, range 32, base f0000000, size 27, enabled > map[14]: type 4, range 32, base 00001c00, size 8, enabled > map[18]: type 1, range 32, base e8000000, size 16, enabled > pcib0: matched entry for 0.4.INTA > pcib0: slot 4 INTA hardwired to IRQ 17 > found-> vendor=0x1166, dev=0x0130, revid=0xa3 > bus=0, slot=6, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) > found-> vendor=0x1166, dev=0x0130, revid=0xa3 > bus=0, slot=7, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0132, revid=0xa3 > bus=0, slot=8, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0132, revid=0xa3 > bus=0, slot=9, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0132, revid=0xa3 > bus=0, slot=10, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1166, dev=0x0132, revid=0xa3 > bus=0, slot=11, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > bus=0, slot=25, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > bus=0, slot=25, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > bus=0, slot=25, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > bus=0, slot=25, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: secondary bus 1 > pcib1: subordinate bus 2 > pcib1: I/O decode 0x3000-0x3fff > pcib1: memory decode 0xe8100000-0xe81fffff > pcib1: prefetched decode 0xfff00000-0xfffff > pci1: <ACPI PCI bus> on pcib1 > pci1: physical bus=1 > found-> vendor=0x1166, dev=0x0104, revid=0xb2 > bus=1, slot=13, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns) > pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0x3000-0x3fff > pcib2: memory decode 0xe8100000-0xe81fffff > pcib2: prefetched decode 0xfff00000-0xfffff > pci2: <ACPI PCI bus> on pcib2 > pci2: physical bus=2 > found-> vendor=0x1000, dev=0x0030, revid=0x08 > bus=2, slot=3, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type 4, range 32, base 00003000, size 8, enabled > pcib2: requested I/O range 0x3000-0x30ff: in range > pcib1: requested I/O range 0x3000-0x30ff: in range > map[14]: type 1, range 64, base e8120000, size 17, enabled > pcib2: requested memory range 0xe8120000-0xe813ffff: good > pcib1: requested memory range 0xe8120000-0xe813ffff: good > map[1c]: type 1, range 64, base e8100000, size 17, enabled > pcib2: requested memory range 0xe8100000-0xe811ffff: good > pcib1: requested memory range 0xe8100000-0xe811ffff: good > pcib2: matched entry for 2.3.INTA > pcib2: slot 3 INTA hardwired to IRQ 18 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem 0xe8120000-0xe813fff > f,0xe8100000-0xe811ffff irq 18 at device 3.0 on pci2 > mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000 > mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xe8120000 > ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.2.12.0 > mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE ) > mpt0: 0 Active Volumes (1 Max) > mpt0: 0 Hidden Drive Members (6 Max) > atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x > 177,0x376,0x2000-0x200f at device 2.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000 > ata0: <ATA channel 0> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=03 ostat0=50 ostat1=00 > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 > ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 > ata0: [MPSAFE] > ata1: <ATA channel 1> on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff > ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 > ata1: [MPSAFE] > isab0: <PCI-ISA bridge> at device 2.2 on pci0 > isa0: <ISA bus> on isab0 > ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xe8011000-0xe8011 > fff irq 10 at device 3.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8011000 > ohci0: (New OHCI DeviceId=0x02231166) > ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xe8012000-0xe8012 > fff irq 10 at device 3.1 on pci0 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8012000 > ohci1: (New OHCI DeviceId=0x02231166) > ohci1: [GIANT-LOCKED] > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: <OHCI (generic) USB controller> on ohci1 > usb1: USB revision 1.0 > uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xe8013000-0xe > 8013fff irq 10 at device 3.2 on pci0 > ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8013000 > ehci0: (New EHCI DeviceId=0x02231166) > ehci0: [GIANT-LOCKED] > usb2: EHCI version 1.0 > usb2: companion controllers, 2 ports each: usb0 usb1 > usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > usb2: USB revision 2.0 > uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub2: 4 ports with 4 removable, self powered > pci0: <display, VGA> at device 4.0 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0xf000-0xfff > pcib3: memory decode 0xfff00000-0xfffff > pcib3: prefetched decode 0xfff00000-0xfffff > pci3: <ACPI PCI bus> on pcib3 > pci3: physical bus=3 > pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 > pcib4: secondary bus 4 > pcib4: subordinate bus 4 > pcib4: I/O decode 0xf000-0xfff > pcib4: memory decode 0xe8200000-0xe82fffff > pcib4: prefetched decode 0xfff00000-0xfffff > pci4: <ACPI PCI bus> on pcib4 > pci4: physical bus=4 > found-> vendor=0x14e4, dev=0x166a, revid=0x03 > bus=4, slot=4, func=0 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=7 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type 1, range 64, base e8210000, size 16, enabled > pcib4: requested memory range 0xe8210000-0xe821ffff: good > map[18]: type 1, range 64, base e8200000, size 16, enabled > pcib4: requested memory range 0xe8200000-0xe820ffff: good > pcib4: matched entry for 4.4.INTA > pcib4: slot 4 INTA hardwired to IRQ 26 > found-> vendor=0x14e4, dev=0x166a, revid=0x03 > bus=4, slot=4, func=1 > class=02-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type 1, range 64, base e8230000, size 16, enabled > pcib4: requested memory range 0xe8230000-0xe823ffff: good > map[18]: type 1, range 64, base e8220000, size 16, enabled > pcib4: requested memory range 0xe8220000-0xe822ffff: good > pcib4: matched entry for 4.4.INTB > pcib4: slot 4 INTB hardwired to IRQ 27 > bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8210000-0xe821ffff,0xe82000 > 00-0xe820ffff irq 26 at device 4.0 on pci4 > bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8210000 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5780 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX > -FDX, auto > bge0: bpf attached > bge0: Ethernet address: 00:11:25:c4:1d:62 > ioapic1: routing intpin 10 (PCI IRQ 26) to vector 53 > bge0: [MPSAFE] > bge1: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8230000-0xe823ffff,0xe82200 > 00-0xe822ffff irq 27 at device 4.1 on pci4 > bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8230000 > miibus1: <MII bus> on bge1 > brgphy1: <BCM5780 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX > -FDX, auto > bge1: bpf attached > bge1: Ethernet address: 00:11:25:c4:1d:63 > ioapic1: routing intpin 11 (PCI IRQ 27) to vector 54 > bge1: [MPSAFE] > pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0 > pcib5: secondary bus 5 > pcib5: subordinate bus 5 > pcib5: I/O decode 0xf000-0xfff > pcib5: memory decode 0xfff00000-0xfffff > pcib5: prefetched decode 0xfff00000-0xfffff > pci5: <ACPI PCI bus> on pcib5 > pci5: physical bus=5 > pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0 > pcib6: secondary bus 6 > pcib6: subordinate bus 6 > pcib6: I/O decode 0xf000-0xfff > pcib6: memory decode 0xfff00000-0xfffff > pcib6: prefetched decode 0xfff00000-0xfffff > pci6: <ACPI PCI bus> on pcib6 > pci6: physical bus=6 > pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0 > pcib7: secondary bus 7 > pcib7: subordinate bus 7 > pcib7: I/O decode 0xf000-0xfff > pcib7: memory decode 0xfff00000-0xfffff > pcib7: prefetched decode 0xfff00000-0xfffff > pci7: <ACPI PCI bus> on pcib7 > pci7: physical bus=7 > pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pcib8: secondary bus 8 > pcib8: subordinate bus 8 > pcib8: I/O decode 0xf000-0xfff > pcib8: memory decode 0xfff00000-0xfffff > pcib8: prefetched decode 0xfff00000-0xfffff > pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.EXB4 - AE_NOT_F > OUND > pci8: <ACPI PCI bus> on pcib8 > pci8: physical bus=8 > pcib9: <ACPI Host-PCI bridge> on acpi0 > pcib9: reading config registers from 0:25:0 > pcib9: couldn't read bus number from cfg space > pcib9: trying bus number 9 > pcib9: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND > pci9: <ACPI PCI bus> on pcib9 > pci9: physical bus=9 > acpi_button0: <Power Button> on acpi0 > speaker0: <PC speaker> port 0x61 on acpi0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: irq maps: 0 0 0 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 > sio: sio0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > ipmi0: <IPMI System Interface> on isa0 > ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0xffffffff (1) > atkbd: failed to reset the keyboard. > kbd0 at atkbd0 > kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 > atkbd0: [GIANT-LOCKED] > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > ppc0 failed to probe at irq 7 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: irq maps: 0 0 0 0 > sio1: probe failed test(s): 0 1 2 4 6 7 9 > sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > isa_probe_children: probing PnP devices > ukbd0: ATEN UC-10KM V1.3.121, rev 1.10/1.00, addr 2, iclass 3/1 > kbd: new array size 4 > kbd1 at ukbd0 > kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 > Device configuration finished. > Reducing kern.maxvnodes 130867 -> 100000 > lapic: Divisor 2, Frequency 99750465 hz > Timecounter "TSC" frequency 2793019707 Hz quality -100 > Timecounters tick every 1.000 msec > ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to d > eny, logging limited to 100 packets/entry by default > lo0: bpf attached > Waiting 3 seconds for SCSI devices to settle > (xpt0:mpt0:0:-1:-1): reset bus > ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire > ipmi0: IPMI device rev. 1, firmware rev. 1.81, version 1.5 > ipmi0: Number of channels 3 > ipmi0: Attached watchdog > (probe1:mpt0:1:0:0): error 22 > (probe1:mpt0:1:0:0): Unretryable Error > (probe1:mpt0:1:1:0): error 22 > (probe1:mpt0:1:1:0): Unretryable Error > (probe1:mpt0:1:2:0): error 22 > (probe1:mpt0:1:2:0): Unretryable Error > (probe1:mpt0:1:3:0): error 22 > (probe1:mpt0:1:3:0): Unretryable Error > (probe1:mpt0:1:4:0): error 22 > (probe1:mpt0:1:4:0): Unretryable Error > (probe1:mpt0:1:5:0): error 22 > (probe1:mpt0:1:5:0): Unretryable Error > (probe0:mpt0:0:0:0): Retrying Command > (probe0:mpt0:0:1:0): Retrying Command > ses0 at mpt0 bus 0 target 8 lun 0 > ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device > ses0: Serial Number 1 > ses0: 3.300MB/s transfers > ses0: SAF-TE Compliant Device > pass0 at mpt0 bus 0 target 0 lun 0 > pass0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device > pass0: Serial Number 3KT4A4RN00007640LBTT > pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena > bled > pass1 at mpt0 bus 0 target 1 lun 0 > pass1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device > pass1: Serial Number 3KT4DDM700007640LDQE > pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena > bled > pass2 at mpt0 bus 0 target 8 lun 0 > pass2: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device > pass2: Serial Number 1 > pass2: 3.300MB/s transfers > pt0 at mpt0 bus 0 target 8 lun 0 > pt0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device > pt0: Serial Number 1 > pt0: 3.300MB/s transfers > GEOM: new disk da0 > GEOM: new disk da1 > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 > ioapic0: Assigning ISA IRQ 1 to local APIC 0 > ioapic0: Assigning ISA IRQ 4 to local APIC 1 > ioapic0: Assigning ISA IRQ 9 to local APIC 0 > ioapic0: Assigning ISA IRQ 10 to local APIC 1 > ioapic0: Assigning ISA IRQ 14 to local APIC 0 > ioapic0: Assigning ISA IRQ 15 to local APIC 1 > ioapic1: Assigning PCI IRQ 18 to local APIC 0 > ioapic1: Assigning PCI IRQ 26 to local APIC 1 > ioapic1: Assigning PCI IRQ 27 to local APIC 0 > da0 at mpt0 bus 0 target 0 lun 0 > da0: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device > da0: Serial Number 3KT4A4RN00007640LBTT > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl > ed > da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) > da1 at mpt0 bus 0 target 1 lun 0 > da1: <IBM-ESXS ST373207LC FN B26C> Fixed Direct Access SCSI-4 device > da1: Serial Number 3KT4DDM700007640LDQE > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl > ed > da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) > > Thanks for your time. > > Sincerely, > Jason Chang > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Jason Chang
2007-May-02 01:42 UTC
bge watchdog timeout -- resetting problem on recent update
Dear Kim,>> 2. using latest(2007/04) 7-current source does not have this >> problem. > > That's weird. The only difference between -CURRENT and -STABLE is > this: > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bge.c.diff?r1=1.91.2.21;r2=1.186 > > Are you sure it is okay with -CURRENT?The 7-current system was installed via 7.0-CURRENT-200704-amd64-disc1.iso which is from the snapshots/200704 directory. #uname -a FreeBSD ccsun50.cc.ntu.edu.tw 7.0-CURRENT-200704 FreeBSD 7.0-CURRENT-200704 #0: Sun Apr 1 12:57:43 UTC 2007 root@stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 #sysctl -a | grep bge hw.bge.allow_asf: 1 hw.bge.fake_autoneg: 0 dev.bge.0.%desc: Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x8003 dev.bge.0.%driver: bge dev.bge.0.%location: slot=4 function=0 dev.bge.0.%pnpinfo: vendor=0x14e4 device=0x166a subvendor=0x1014 subdevice=0x0329 class=0x020000 dev.bge.0.%parent: pci4 dev.bge.0.stats.FramesDroppedDueToFilters: 0 dev.bge.0.stats.DmaWriteQueueFull: 0 dev.bge.0.stats.DmaWriteHighPriQueueFull: 0 dev.bge.0.stats.NoMoreRxBDs: 0 dev.bge.0.stats.InputDiscards: 0 dev.bge.0.stats.InputErrors: 0 dev.bge.0.stats.RecvThresholdHit: 0 dev.bge.0.stats.DmaReadQueueFull: 0 dev.bge.0.stats.DmaReadHighPriQueueFull: 0 dev.bge.0.stats.SendDataCompQueueFull: 0 dev.bge.0.stats.RingSetSendProdIndex: 0 dev.bge.0.stats.RingStatusUpdate: 0 dev.bge.0.stats.Interrupts: 0 dev.bge.0.stats.AvoidedInterrupts: 0 dev.bge.0.stats.SendThresholdHit: 0 dev.bge.0.stats.rx.Octets: 0 dev.bge.0.stats.rx.Fragments: 0 dev.bge.0.stats.rx.UcastPkts: 0 dev.bge.0.stats.rx.MulticastPkts: 0 dev.bge.0.stats.rx.FCSErrors: 0 dev.bge.0.stats.rx.AlignmentErrors: 0 dev.bge.0.stats.rx.xonPauseFramesReceived: 0 dev.bge.0.stats.rx.xoffPauseFramesReceived: 0 dev.bge.0.stats.rx.ControlFramesReceived: 0 dev.bge.0.stats.rx.xoffStateEntered: 0 dev.bge.0.stats.rx.FramesTooLong: 0 dev.bge.0.stats.rx.Jabbers: 0 dev.bge.0.stats.rx.UndersizePkts: 0 dev.bge.0.stats.rx.inRangeLengthError: 0 dev.bge.0.stats.rx.outRangeLengthError: 0 dev.bge.0.stats.tx.Octets: 0 dev.bge.0.stats.tx.Collisions: 0 dev.bge.0.stats.tx.XonSent: 0 dev.bge.0.stats.tx.XoffSent: 0 dev.bge.0.stats.tx.flowControlDone: 0 dev.bge.0.stats.tx.InternalMacTransmitErrors: 0 dev.bge.0.stats.tx.SingleCollisionFrames: 0 dev.bge.0.stats.tx.MultipleCollisionFrames: 0 dev.bge.0.stats.tx.DeferredTransmissions: 0 dev.bge.0.stats.tx.ExcessiveCollisions: 0 dev.bge.0.stats.tx.LateCollisions: 0 dev.bge.0.stats.tx.UcastPkts: 0 dev.bge.0.stats.tx.MulticastPkts: 0 dev.bge.0.stats.tx.BroadcastPkts: 0 dev.bge.0.stats.tx.CarrierSenseErrors: 0 dev.bge.0.stats.tx.Discards: 0 dev.bge.0.stats.tx.Errors: 0> Ah, I see that you have IPMI module. Can you add the following line > in /boot/loader.conf: > > hw.bge.allow_asf="1" > > and reboot?The result is the same: bge0: watchdog timeout -- resetting bge0: link state changed to DOWN bge0: link state changed to UP The only difference is that ssh connection will break when using hw.bge.allow_asf="0", and after turning to "1", ssh connection will not break. Sincerely, Jason Chang
CQ CQ de Jason
2007-May-02 01:51 UTC
bge watchdog timeout -- resetting problem on recent update
Dear Kim,>> 2. using latest(2007/04) 7-current source does not have this >> problem. > > That's weird. The only difference between -CURRENT and -STABLE is > this: > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/bge/if_bge.c.diff?r1=1.91.2.21;r2=1.186 > > Are you sure it is okay with -CURRENT?There is something strange here. The server model is IBM e326m AMD Opteron. But 6.2 & 7 get the different bge chipset model number. 6.2-STABLE uname -a FreeBSD ccsun51.cc.ntu.edu.tw 6.2-STABLE-200704 FreeBSD 6.2-STABLE-200704 #0: Sun Apr 1 08:57:24 UTC 2007 root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP amd64 bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8210000-0xe821ffff,0xe82000 00-0xe820ffff irq 26 at device 4.0 on pci4 7.0-CURRENT uname -a FreeBSD ccsun50.cc.ntu.edu.tw 7.0-CURRENT-200704 FreeBSD 7.0-CURRENT-200704 #0: Sun Apr 1 12:57:43 UTC 2007 root@stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x8003> mem 0xe 8210000-0xe821ffff,0xe8200000-0xe820ffff irq 26 at device 4.0 on pci4 miibus0: <MII bus> on bge0 brgphy0: <BCM5780 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX -FDX, auto Sincerely, Jason Chang