When I try running wpa_supplicant I get the following output:
# wpa_supplicant -iipw0 -c/etc/wpa_supplicant.conf
Associated with 00:12:bf:77:b6:1c
Authentication with 00:12:bf:77:b6:1c timed out.
After a couple of minutes the output repeats. The authentication model is
WPA-PSK, setting it in the configuration doesn't change anything though.
This is my wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
network={
ssid="gateway.norad"
#psk="the key"
psk=generated by wpa_passphrase
}
For 2 or 3 seconds ifconfig shows status:associated (between the associated and
the timed out message). However even in this short time frame, no traffic gets
through the device.
Ere I forget, does someone have a suggestion to solve this?
The following is the verbose output until I press CTRL-C:
# wpa_supplicant -dK -iipw0 -c/etc/wpa_supplicant.conf
Initializing interface 'ipw0' conf '/etc/wpa_supplicant.conf'
driver 'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' ->
'/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0 (from group name 'wheel')
Priority group 0
id=0 ssid='gateway.norad'
Initializing interface (2) 'ipw0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:04:23:79:66:68
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface ipw0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:12:bf:77:b6:1c ssid='gateway.norad' wpa_ie_len=28 rsn_ie_len=0
caps=0x31
selected based on WPA IE
Trying to associate with 00:12:bf:77:b6:1c (SSID='gateway.norad'
freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'gateway.norad' wpa ie len 24 pairwise 3
group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
State: ASSOCIATING -> ASSOCIATED
Associated to a new BSS: BSSID=00:40:05:ae:df:6f
No keys have been configured - skip key clearing
Associated with 00:40:05:ae:df:6f
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
Authentication with 00:40:05:ae:df:6f timed out.
Added BSSID 00:40:05:ae:df:6f into blacklist
State: ASSOCIATED -> DISCONNECTED
wpa_driver_bsd_disassociate
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
EAPOL: startWhen --> 0