Hi, This is on 6.2-STABLE, updated last week. I've added a new ~250 GB disc to my netra X1. It's working OK but somehow sunlabel is unwilling to install the bootstrap code on the disc because of some sizing issue with the c partition (whole disk). Even though sysinstall let me partition the disc just fine for some reason it has made the c partition way too small, causing the sunlabel -B command to error out. Any tips? ad1: 238475MB <WDC WD2500JB-00REA0 20.00K20> at ata3-master UDMA66 # sunlabel -nB ad1 sunlabel: partition f extends past end of disk sunlabel: invalid label # # sunlabel ad1 # /dev/ad1: text: FreeBSD233G cyl 25767 alt 2 hd 16 sec 63 bytes/sector: 512 sectors/cylinder: 1008 sectors/unit: 25973136 8 partitions: # # Size is in sectors. # Offset is in cylinders. # size offset # ---------- ---------- a: 1049328 0 b: 4195296 1041 c: 25973136 0 d: 4195296 5203 e: 1049328 9365 f: 16778160 10406 g: 461127744 27051 cheers, Ruben