Hi, I have a Motorola V3x phone with 1GB T-Flash memory card. It can mount as a removal drive on Windows XP and Ubuntu, but on FreeBSD (6.2 stable) will cause these message (see below) and failed to mount. Does any one know how to fix it? BTW, If I switch V3x USB as UMTS modem, FreeBSD still cannot use it as modem device. /Eric ---------- umass0: Motorola Inc. Motorola Phone (RAZRV3x), rev 1.10/0.01, addr 2 umass0: Get Max Lun not supported (SHORT_XFER) xptioctl: pass driver is not in the kernel xptioctl: put "device pass0" in your kernel config file da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Motorola Motorola Phone 2.31> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 952MB (1950721 512 byte sectors: 64H 32S/T 952C) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retries Exhausted ---------- -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070216/edc8b6b4/attachment.pgp
>>> xptioctl: pass driver is not in the kernel <<<< >>> xptioctl: put "device pass0" in your kernel config <<<<On Friday 16 February 2007 05:33, Eric L. Chen wrote:> Hi, > I have a Motorola V3x phone with 1GB T-Flash memory card. > It can mount as a removal drive on Windows XP and Ubuntu, but on FreeBSD > (6.2 stable) will cause these message (see below) and failed to mount. > Does any one know how to fix it? > BTW, If I switch V3x USB as UMTS modem, FreeBSD still cannot use it as > modem device. > > /Eric > > ---------- > umass0: Motorola Inc. Motorola Phone (RAZRV3x), rev 1.10/0.01, addr 2 > umass0: Get Max Lun not supported (SHORT_XFER) > xptioctl: pass driver is not in the kernel > xptioctl: put "device pass0" in your kernel config filexptioctl: put "devicepass0" in your kernel config file> da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Motorola Motorola Phone 2.31> Removable Direct Access SCSI-2 > device > da0: 1.000MB/s transfers > da0: 952MB (1950721 512 byte sectors: 64H 32S/T 952C) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retries Exhausted > ------------ Sergey Yaroshevsky, astraserg@proc.ru
Hi Sergey, Thanks! Other umass devices like USB stick flash will no problem to mount. So, I think my pass is already fine. And I cvsuped today then it can mount V3x umass device! Even I did not change my kernel config file. /Eric On Fri, 2007-02-16 at 10:24 +0300, AstraSerg wrote:> >>> xptioctl: pass driver is not in the kernel <<<< > >>> xptioctl: put "device pass0" in your kernel config <<<< > > > On Friday 16 February 2007 05:33, Eric L. Chen wrote: > > Hi, > > I have a Motorola V3x phone with 1GB T-Flash memory card. > > It can mount as a removal drive on Windows XP and Ubuntu, but on FreeBSD > > (6.2 stable) will cause these message (see below) and failed to mount. > > Does any one know how to fix it? > > BTW, If I switch V3x USB as UMTS modem, FreeBSD still cannot use it as > > modem device. > > > > /Eric > > > > ---------- > > umass0: Motorola Inc. Motorola Phone (RAZRV3x), rev 1.10/0.01, addr 2 > > umass0: Get Max Lun not supported (SHORT_XFER) > > xptioctl: pass driver is not in the kernel > > xptioctl: put "device pass0" in your kernel config filexptioctl: put "device > pass0" in your kernel config file > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: <Motorola Motorola Phone 2.31> Removable Direct Access SCSI-2 > > device > > da0: 1.000MB/s transfers > > da0: 952MB (1950721 512 byte sectors: 64H 32S/T 952C) > > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > > (da0:umass-sim0:0:0:0): No additional sense information > > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > > (da0:umass-sim0:0:0:0): No additional sense information > > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > > (da0:umass-sim0:0:0:0): No additional sense information > > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > > (da0:umass-sim0:0:0:0): No additional sense information > > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > > (da0:umass-sim0:0:0:0): No additional sense information > > (da0:umass-sim0:0:0:0): Retries Exhausted > > ---------- >-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070216/7be49b35/attachment.pgp
Hi All, I am sorry for that I forgot I modified /usr/src/sys/dev/usb/usbdevs to make V3x umass device work. If anyone need mount V3x umass device please use this patch. /Eric --- /usr/src/sys/dev/usb/usbdevs Thu Feb 15 03:57:15 2007 +++ /usr/src/sys/dev/usb/usbdevs Sat Feb 17 00:46:48 2007 @@ -1297,6 +1297,7 @@ product MOTOROLA SB4100 0x4100 SB4100 USB Cable Modem product MOTOROLA2 A41XV32X 0x2a22 A41x/V32x Mobile Phones product MOTOROLA2 E398 0x4810 E398 Mobile Phone +product MOTOROLA2 RAZRV3X 0x3010 Razr V3x Mobile Phone /* MultiTech products */ product MULTITECH ATLAS 0xf101 MT5634ZBA-USB modem On Sat, 2007-02-17 at 00:38 +0800, Eric L. Chen wrote:> Hi Sergey, > Thanks! > Other umass devices like USB stick flash will no problem to mount. > So, I think my pass is already fine. > And I cvsuped today then it can mount V3x umass device! > Even I did not change my kernel config file. > > /Eric > > On Fri, 2007-02-16 at 10:24 +0300, AstraSerg wrote: > > >>> xptioctl: pass driver is not in the kernel <<<< > > >>> xptioctl: put "device pass0" in your kernel config <<<<-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070216/c8afa297/attachment.pgp