woodstock@index.hu
2007-Feb-11 20:06 UTC
FreeBSd 6.1 to 6.2 upgrade kernel errors: unknown: I/O range not supported
Hi list, Last Friday I upgraded my 6.1 to 6.2. This box is Compaq DL320G1 with the all latest firmwares running only cvsup-mirror service for other servers. No customization, any extra setting, default setup whatsoever. The upgrade went fine, no problems I encountered. It was not binary upgrade and I must admit that it was my FIRST upgrade on FreeBSD so followed basically the handbook step by step. After the upgrade at reboot I get weird errors (I/O range not supported) I don't quite like hence not dare to proceed with other production servers. The box behaves normal but these messages just make me concerned not to mention that at a certain stage (finding HW RAID array) the box hangs for a minute (didn't do before, HDD goes nuts) then mounts partitions and proceeds the boot process. Here it is my verbose dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Feb 9 08:52:41 NZDT 2007 root@host.domain.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b55000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b550cc. Table 'FACP' at 0xe80d0 Table 'APIC' at 0xe8144 MADT: Found table at 0xe8144 MP Configuration Table version 1.4 found at 0xc00f0b30 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193168 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1258216274 Hz CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1258.22-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff real memory = 268435456 (256 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000000fb3dfff, 250712064 bytes (61209 pages) avail memory = 253149184 (241 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xeca00 (c00eca00) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xeca00+0x1036 pnpbios: Found PnP BIOS data at 0xc00f7b10 pnpbios: Entry = f0000:6529 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) MADT: Found IO APIC ID 3, Interrupt 16 at 0xfec01000 ioapic1: intpin 0 -> PCI IRQ 16 (level, low) ioapic1: intpin 1 -> PCI IRQ 17 (level, low) ioapic1: intpin 2 -> PCI IRQ 18 (level, low) ioapic1: intpin 3 -> PCI IRQ 19 (level, low) ioapic1: intpin 4 -> PCI IRQ 20 (level, low) ioapic1: intpin 5 -> PCI IRQ 21 (level, low) ioapic1: intpin 6 -> PCI IRQ 22 (level, low) ioapic1: intpin 7 -> PCI IRQ 23 (level, low) ioapic1: intpin 8 -> PCI IRQ 24 (level, low) ioapic1: intpin 9 -> PCI IRQ 25 (level, low) ioapic1: intpin 10 -> PCI IRQ 26 (level, low) ioapic1: intpin 11 -> PCI IRQ 27 (level, low) ioapic1: intpin 12 -> PCI IRQ 28 (level, low) ioapic1: intpin 13 -> PCI IRQ 29 (level, low) ioapic1: intpin 14 -> PCI IRQ 30 (level, low) ioapic1: intpin 15 -> PCI IRQ 31 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic1 irqs 16-31 on motherboard ioapic0 irqs 0-15 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010000 wlan: ath_rate: version 1.2 null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Feb 9 2007 08:52:15) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: wakeup code va 0xc7224000 pa 0x9e000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00ede80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 15 A 0x01 3 4 5 7 10 11 14 15 embedded 0 15 B 0xff none embedded 0 15 C 0xff none embedded 0 15 D 0xff none embedded 0 2 A 0x18 3 4 5 7 10 11 14 15 embedded 0 2 B 0xff none embedded 0 2 C 0xff none embedded 0 2 D 0xff none embedded 0 3 A 0x19 3 4 5 7 10 11 14 15 embedded 0 3 B 0xff none embedded 0 3 C 0xff none embedded 0 3 D 0xff none embedded 1 3 A 0x15 3 4 5 7 10 11 14 15 embedded 1 3 B 0xff none embedded 1 3 C 0xff none embedded 1 3 D 0xff none embedded 1 4 A 0x16 3 4 5 7 10 11 14 15 embedded 1 4 B 0xff none embedded 1 4 C 0xff none embedded 1 4 D 0xff none embedded 1 2 A 0x14 3 4 5 7 10 11 14 15 embedded 1 2 B 0xff none embedded 1 2 C 0xff none embedded 1 2 D 0xff none embedded 1 5 A 0x14 3 4 5 7 10 11 14 15 embedded 1 5 B 0xff none embedded 1 5 C 0xff none embedded 1 5 D 0xff none slot 1 1 1 A 0x10 3 4 5 7 10 11 14 15 slot 1 1 1 B 0x11 3 4 5 7 10 11 14 15 slot 1 1 1 C 0x12 3 4 5 7 10 11 14 15 slot 1 1 1 D 0x13 3 4 5 7 10 11 14 15 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 1 unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported unknown: I/O range not supported ACPI timer: 0/3 0/3 0/4 0/5 0/4 0/4 0/4 0/3 0/4 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: port 0xf808-0xf80b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 7 10 11 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 7 10 11 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 7 10 11 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link8: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 14 15 pci_link8: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 7 10 11 14 15 pci_link8: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link9: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 7 10 11 14 15 pci_link9: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 7 10 11 14 15 pci_link9: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link10: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link10: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link10: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link11: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link11: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link11: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link12: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link12: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link12: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link13: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link13: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link13: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link14: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link14: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link14: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link15: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link15: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link15: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 pci_link16: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 14 15 pci_link16: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 7 10 11 14 15 pci_link16: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 7 10 11 14 15 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0xf810 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0000000, size 24, enabled map[14]: type 4, range 32, base 00001000, size 8, enabled map[18]: type 1, range 32, base b1000000, size 12, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 24 found-> vendor=0x0e11, dev=0xa0f0, revid=0x00 bus=0, slot=3, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[10]: type 4, range 32, base 00001400, size 8, enabled map[14]: type 1, range 32, base b1200000, size 8, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 25 found-> vendor=0x1166, dev=0x0200, revid=0x51 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 0000fc00, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=5 map[10]: type 1, range 32, base b1100000, size 12, enabled pcib0: matched entry for 0.15.INTA pcib0: slot 15 INTA hardwired to IRQ 23 pci0: at device 2.0 (no driver attached) pci0: at device 3.0 (no driver attached) isab0: port 0xfc00-0xfc0f at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50 ata1: [MPSAFE] ohci0: mem 0xb1100000-0xb1100fff irq 23 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1100000 ohci0: (New OHCI DeviceId=0x02201166) ioapic1: routing intpin 7 (PCI IRQ 23) to vector 51 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: on acpi0 pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x0e11, dev=0xb178, revid=0x01 bus=1, slot=1, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x47 (2130 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 1, range 64, base d0000000, size 18, enabled map[18]: type 4, range 32, base 0000b000, size 8, enabled map[1c]: type 3, range 64, base d0500000, size 14, enabled pcib1: matched entry for 1.1.INTA pcib1: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=1, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0300000, size 12, enabled map[14]: type 4, range 32, base 0000b400, size 6, enabled map[18]: type 1, range 32, base d0100000, size 20, enabled pcib1: matched entry for 1.3.INTA pcib1: slot 3 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=1, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0400000, size 12, enabled map[14]: type 4, range 32, base 0000b440, size 6, enabled map[18]: type 1, range 32, base d0200000, size 20, enabled pcib1: matched entry for 1.4.INTA pcib1: slot 4 INTA hardwired to IRQ 22 ciss0: port 0xb000-0xb0ff mem 0xd0000000-0xd003ffff,0xd0500000-0xd0503fff irq 16 at device 1.0 on pci1 ciss0: Reserved 0x40000 bytes for rid 0x10 type 3 at 0xd0000000 ioapic1: routing intpin 0 (PCI IRQ 16) to vector 52 ciss0: [GIANT-LOCKED] ciss0: using 256 of 1024 available commands ciss0: firmware 2.58 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0x6 ciss0: active I/O method 0x3 ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2 ciss0: server name '' ciss0: heartbeat 0x30000027 ciss0: 2 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 1, 34304MB online fxp0: port 0xb400-0xb43f mem 0xd0300000-0xd0300fff,0xd0100000-0xd01fffff irq 21 at device 3.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0300000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 0e11 b134 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:08:02:45:b3:db ioapic1: routing intpin 5 (PCI IRQ 21) to vector 53 fxp0: [MPSAFE] fxp1: port 0xb440-0xb47f mem 0xd0400000-0xd0400fff,0xd0200000-0xd02fffff irq 22 at device 4.0 on pci1 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0400000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 0e11 b134 0008 fxp1: Dynamic Standby mode is disabled miibus1: on fxp1 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:08:02:45:b2:85 ioapic1: routing intpin 6 (PCI IRQ 22) to vector 54 fxp1: [MPSAFE] acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ sio0: irq maps: 0x8201 0x8211 0x8201 0x8201 sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 fdc0: port 0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57 fdc0: [MPSAFE] fdc0: [FAST] fd0: on fdc0 drive 0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ahc_isa_probe 0: ioport 0xc00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xcffff,0xd0000-0xd3fff,0xe8000-0xeffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x8201 0x8201 0x8201 0x8201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66221787 hz Timecounter "TSC" frequency 1258216274 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ROSB4 chip acd0: CDROM drive at ata1 as master acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error ciss0: command status 0x1 (target status) scsi status 0x2 (probe0:ciss0:0:0:0): error 22 (probe0:ciss0:0:0:0): Unretryable Error pass0 at ciss0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-0 device pass0: 135.168MB/s transfers ATA PseudoRAID loaded da0 at ciss0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) GEOM: new disk da0 Trying to mount root from ufs:/dev/da0s1a start_init: trying /sbin/init Linux ELF exec handler installed I would appreciate if somebody could explain why it is or just explain this situation (if ignorable) Thanks, Adam --------------------------Hirdet?s----------------------------- S?utak - Ausztria, Olaszorsz?g, Franciaorsz?g, Sv?jc