I have a FreeBSD 6.2 (RELENG_6_2) box with a RocketRaid 2320 card (8 port SATA-2, PCI-E 4x). Attached to the 2320 card are two 500GB drives (Samsung) in a RAID-0 array. The system runs off of a 320GB drive hooked up to the motherboard. When stressing the RAID-0 array (multiple processes doing read/write) I get messages like this in the system log: rr232x: start channel [0,0] rr232x: channel [0,0] started successfully When this happens it looks like any read in progress is either terminated early or returns bad data. (I'm using security/cksfv to verify files, and it only reports the file(s) as corrupt so I cannot tell if the read was short or returned bad data.) Any hints? /Daniel Eriksson