I have installed FreeBSD 6.2-RELEASE on a server with a Promise FastTrak
SX4300, currently installed in a 32-bit PCI slot. I'm booting off a
drive which is connected to the onboard ICH7 SATA300 controller.
I have made the minimal changes to dev/ata/ata-chipset.c and
dev/ata/ata-pci.h to identify the card based on what I could decipher
of the verbose dmesg. It now identifies the card but has problems and
won't use it.
I've tried a few different combinations of settings in ata-chipset.
Changing the fourth column seemed to always give me the same errors in
dmesg. Changing the third column to PRTX seemed to make progress. It
changed my boot drive from ad7s1a to ad11s1a.
Changing the third column to PRNEW caused a panic. :-)
Does anybody have any suggestions?
--- ata-pci.h.6.2 Fri Jan 26 22:21:21 2007
+++ ata-pci.h Fri Jan 26 22:23:18 2007
@@ -248,6 +248,7 @@
#define ATA_PDC40719 0x3515105a
#define ATA_PDC40775 0x3d73105a
#define ATA_PDC40779 0x3577105a
+#define ATA_PDC41721 0x6302105a
#define ATA_PDC20617 0x6617105a
#define ATA_PDC20618 0x6626105a
#define ATA_PDC20619 0x6629105a
--- ata-chipset.c.6.2 Fri Jan 26 22:21:03 2007
+++ ata-chipset.c.PRTX.PRSATA2 Fri Jan 26 23:52:56 2007
@@ -3058,6 +3058,7 @@
{ ATA_PDC40718, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40718" },
{ ATA_PDC40719, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40719" },
{ ATA_PDC40779, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40779" },
+ { ATA_PDC41721, 0, PRTX, PRSATA2, ATA_SA300, "PDC41721" },
{ 0, 0, 0, 0, 0, 0}};
char buffer[64];
uintptr_t devid = 0;
--- ata-chipset.c.6.2 Fri Jan 26 22:21:03 2007
+++ ata-chipset.c.PRNEW.PRSATA2 Sat Jan 27 00:33:26 2007
@@ -3058,6 +3058,7 @@
{ ATA_PDC40718, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40718" },
{ ATA_PDC40719, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40719" },
{ ATA_PDC40779, 0, PRMIO, PRSATA2, ATA_SA300, "PDC40779" },
+ { ATA_PDC41721, 0, PRNEW, PRSATA2, ATA_SA300, "PDC41721" },
{ 0, 0, 0, 0, 0, 0}};
char buffer[64];
uintptr_t devid = 0;
The relevant parts of the dmesg of a verbose boot are:
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x1000-0x1fff
pcib4: memory decode 0x28400000-0x284fffff
pcib4: prefetched decode 0x20000000-0x283fffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x105a, dev=0x6302, revid=0x00
bus=4, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
MSI supports 16 messages, 64 bit
map[10]: type 4, range 32, base 00001140, size 5, enabled
pcib4: (null) requested I/O range 0x1140-0x115f: in range
map[18]: type 1, range 64, base 28440000, size 16, enabled
pcib4: (null) requested memory range 0x28440000-0x2844ffff: good
map[20]: type 3, range 64, base 28000000, size 22, enabled
pcib4: (null) requested memory range 0x28000000-0x283fffff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
....
With PRMIO:
atapci0: <Promise PDC41721 SATA300 controller> port 0x1140-0x115f mem
0x28440000-0x2844ffff,0x28000000-0x283fffff irq 22 at device 1.0 on pci4
pci4: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an
memio
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
atapci0: [MPSAFE]
atapci0: Reserved 0x400000 bytes for rid 0x20 type 3 at 0x28000000
pci4: child atapci0 requested type 3 for rid 0x1c, but the BAR says it is an
ioport
device_attach: atapci0 attach returned 6
With PRTX:
atapci0: <Promise PDC41721 SATA300 controller> port 0x1140-0x115f mem
0x28440000
-0x2844ffff,0x28000000-0x283fffff irq 22 at device 1.0 on pci4
pci4: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an
memio
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x1140
device_attach: ata2 attach returned 6
ata3: <ATA channel 1> on atapci0
pci4: child atapci0 requested type 4 for rid 0x18, but the BAR says it is an
memio
device_attach: ata3 attach returned 6
--
Scott Lambert KC5MLE Unix SysAdmin
lambert@lambertfam.org
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 26 09:15:25 CST 2007
root@kimsbox.lambertfam.org:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b63000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b63174.
Calibrating clock(s) ... i8254 clock: 1190812 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2998501350 Hz
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2998.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf62 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 535162880 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000001f521fff, 512729088 bytes (125178 pages)
avail memory = 514093056 (490 MB)
MP Configuration Table version 1.4 found at 0xc00fec70
Table 'FACP' at 0x1fefcf10
Table 'APIC' at 0x1fefce10
MADT: Found table at 0x1fefce10
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <INTEL 04DT044 >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
pnpbios: Found PnP BIOS data at 0xc00fe0e0
pnpbios: Entry = f0000:a507 Rev = 1.0
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 5, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 5
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic1: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 26 2007 09:15:11)
npx0: INT 16 interface
acpi0: <INTEL 04DT044> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa18
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27788086)
pcibios: No call entry point
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcd6b3000 pa 0x9b000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2778, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27d0, revid=0x01
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x27e0, revid=0x01
bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x27e2, revid=0x01
bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
found-> vendor=0x8086, dev=0x27c8, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 00003080, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00003060, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00003040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00003020, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 28600400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xe1
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x01 (250 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 000030b0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27c0, revid=0x01
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000030c8, size 3, enabled
map[14]: type 4, range 32, base 000030e4, size 2, enabled
map[18]: type 4, range 32, base 000030c0, size 3, enabled
map[1c]: type 4, range 32, base 000030e0, size 2, enabled
map[20]: type 4, range 32, base 000030a0, size 4, enabled
map[24]: type 1, range 32, base 28600000, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27da, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0141, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00003000, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x2000-0x2fff
pcib3: memory decode 0x28500000-0x285fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x108b, revid=0x03
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base 28500000, size 17, enabled
pcib3: (null) requested memory range 0x28500000-0x2851ffff: good
map[18]: type 4, range 32, base 00002000, size 5, enabled
pcib3: (null) requested I/O range 0x2000-0x201f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2000-0x201f mem 0x28500000-0x2851ffff irq 17 at device 0.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x28500000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x2000
em0: bpf attached
em0: Ethernet address: 00:19:d1:29:87:40
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
em0: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at device
29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3080
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3060-0x307f irq 19 at device
29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device
29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3020-0x303f irq 16 at device
29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0x28600400-0x286007ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x28600400
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x1000-0x1fff
pcib4: memory decode 0x28400000-0x284fffff
pcib4: prefetched decode 0x20000000-0x283fffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x105a, dev=0x6302, revid=0x00
bus=4, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
MSI supports 16 messages, 64 bit
map[10]: type 4, range 32, base 00001140, size 5, enabled
pcib4: (null) requested I/O range 0x1140-0x115f: in range
map[18]: type 1, range 64, base 28440000, size 16, enabled
pcib4: (null) requested memory range 0x28440000-0x2844ffff: good
map[20]: type 3, range 64, base 28000000, size 22, enabled
pcib4: (null) requested memory range 0x28000000-0x283fffff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=4, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base 20000000, size 27, enabled
pcib4: (null) requested memory range 0x20000000-0x27ffffff: good
map[14]: type 4, range 32, base 00001000, size 8, enabled
pcib4: (null) requested I/O range 0x1000-0x10ff: in range
map[18]: type 1, range 32, base 28450000, size 16, enabled
pcib4: (null) requested memory range 0x28450000-0x2845ffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1076, revid=0x05
bus=4, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 28420000, size 17, enabled
pcib4: (null) requested memory range 0x28420000-0x2843ffff: good
map[14]: type 1, range 32, base 28400000, size 17, enabled
pcib4: (null) requested memory range 0x28400000-0x2841ffff: good
map[18]: type 4, range 32, base 00001100, size 6, enabled
pcib4: (null) requested I/O range 0x1100-0x113f: in range
pcib4: matched entry for 4.5.INTA
pcib4: slot 5 INTA hardwired to IRQ 17
atapci0: <Promise PDC41721 SATA300 controller> port 0x1140-0x115f mem
0x28440000-0x2844ffff,0x28000000-0x283fffff irq 22 at device 1.0 on pci4
pci4: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an
memio
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
atapci0: [MPSAFE]
atapci0: Reserved 0x400000 bytes for rid 0x20 type 3 at 0x28000000
pci4: child atapci0 requested type 3 for rid 0x1c, but the BAR says it is an
ioport
device_attach: atapci0 attach returned 6
pci4: <display, VGA> at device 4.0 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x1100-0x113f mem 0x28420000-0x2843ffff,0x28400000-0x2841ffff irq 17 at device
5.0 on pci4
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x28420000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0x1100
em1: bpf attached
em1: Ethernet address: 00:19:d1:29:87:41
em1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf irq 18 at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
atapci2: <Intel ICH7 SATA300 controller> port
0x30c8-0x30cf,0x30e4-0x30e7,0x30c0-0x30c7,0x30e0-0x30e3,0x30a0-0x30af mem
0x28600000-0x286003ff irq 19 at device 31.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30a0
atapci2: [MPSAFE]
ata2: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c8
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30e4
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30c0
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30e0
ata3: reset tp1 mask=03 ostat0=7f ostat1=50
ata3: stat0=0x7f err=0x00 lsb=0xff msb=0xff
ata3: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=7f stat1=50 devices=0x2<ATA_SLAVE>
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
sio0: irq maps: 0x4c01 0x4c11 0x4c01 0x4c01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4c01 0x4c01 0x4c01 0x4c01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750294 hz
Timecounter "TSC" frequency 2998501350 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA33 on ICH7 chip
acd0: <COMBO 52X32X52X/RTJ1> CDRW drive at ata0 as master
acd0: 1536KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata3-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad7: 76319MB <WDC WD800JD-22LSA0 06.01D06> at ata3-slave SATA150
ad7: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad7
ad7: Intel check1 failed
ad7: Adaptec check1 failed
ad7: LSI (v3) check1 failed
ad7: LSI (v2) check1 failed
ad7: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 0
INTR: Assigning IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 1
INTR: Assigning IRQ 15 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
INTR: Assigning IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 1
INTR: Assigning IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad7s1a
start_init: trying /sbin/init
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #4: Fri Jan 26 23:58:57 CST 2007
root@kimsbox.lambertfam.org:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b61000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b61174.
Calibrating clock(s) ... i8254 clock: 439 Hz
439 Hz differs from default of 1193182 Hz by more than 1%
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2995507395 Hz
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2995.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf62 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 535162880 (510 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000001f521fff, 512729088 bytes (125178 pages)
avail memory = 514093056 (490 MB)
MP Configuration Table version 1.4 found at 0xc00fec70
Table 'FACP' at 0x1fefcf10
Table 'APIC' at 0x1fefce10
MADT: Found table at 0x1fefce10
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <INTEL 04DT044 >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
pnpbios: Found PnP BIOS data at 0xc00fe0e0
pnpbios: Entry = f0000:a507 Rev = 1.0
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 5, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 5
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic1: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 26 2007 23:57:46)
npx0: INT 16 interface
acpi0: <INTEL 04DT044> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa18
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27788086)
pcibios: No call entry point
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcd6b3000 pa 0x9b000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2778, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27d0, revid=0x01
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x27e0, revid=0x01
bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x27e2, revid=0x01
bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
found-> vendor=0x8086, dev=0x27c8, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 00003080, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00003060, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00003040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00003020, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 28600400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xe1
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x01 (250 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 000030b0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27c0, revid=0x01
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000030c8, size 3, enabled
map[14]: type 4, range 32, base 000030e4, size 2, enabled
map[18]: type 4, range 32, base 000030c0, size 3, enabled
map[1c]: type 4, range 32, base 000030e0, size 2, enabled
map[20]: type 4, range 32, base 000030a0, size 4, enabled
map[24]: type 1, range 32, base 28600000, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27da, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0141, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00003000, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x2000-0x2fff
pcib3: memory decode 0x28500000-0x285fffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x108b, revid=0x03
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base 28500000, size 17, enabled
pcib3: (null) requested memory range 0x28500000-0x2851ffff: good
map[18]: type 4, range 32, base 00002000, size 5, enabled
pcib3: (null) requested I/O range 0x2000-0x201f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2000-0x201f mem 0x28500000-0x2851ffff irq 17 at device 0.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x28500000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x2000
em0: bpf attached
em0: Ethernet address: 00:19:d1:29:87:40
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
em0: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at device
29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3080
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3060-0x307f irq 19 at device
29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device
29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3020-0x303f irq 16 at device
29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0x28600400-0x286007ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0x28600400
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x1000-0x1fff
pcib4: memory decode 0x28400000-0x284fffff
pcib4: prefetched decode 0x20000000-0x283fffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x105a, dev=0x6302, revid=0x00
bus=4, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
MSI supports 16 messages, 64 bit
map[10]: type 4, range 32, base 00001140, size 5, enabled
pcib4: (null) requested I/O range 0x1140-0x115f: in range
map[18]: type 1, range 64, base 28440000, size 16, enabled
pcib4: (null) requested memory range 0x28440000-0x2844ffff: good
map[20]: type 3, range 64, base 28000000, size 22, enabled
pcib4: (null) requested memory range 0x28000000-0x283fffff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=4, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base 20000000, size 27, enabled
pcib4: (null) requested memory range 0x20000000-0x27ffffff: good
map[14]: type 4, range 32, base 00001000, size 8, enabled
pcib4: (null) requested I/O range 0x1000-0x10ff: in range
map[18]: type 1, range 32, base 28450000, size 16, enabled
pcib4: (null) requested memory range 0x28450000-0x2845ffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1076, revid=0x05
bus=4, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base 28420000, size 17, enabled
pcib4: (null) requested memory range 0x28420000-0x2843ffff: good
map[14]: type 1, range 32, base 28400000, size 17, enabled
pcib4: (null) requested memory range 0x28400000-0x2841ffff: good
map[18]: type 4, range 32, base 00001100, size 6, enabled
pcib4: (null) requested I/O range 0x1100-0x113f: in range
pcib4: matched entry for 4.5.INTA
pcib4: slot 5 INTA hardwired to IRQ 17
atapci0: <Promise PDC41721 SATA300 controller> port 0x1140-0x115f mem
0x28440000-0x2844ffff,0x28000000-0x283fffff irq 22 at device 1.0 on pci4
pci4: child atapci0 requested type 4 for rid 0x20, but the BAR says it is an
memio
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x1140
device_attach: ata2 attach returned 6
ata3: <ATA channel 1> on atapci0
pci4: child atapci0 requested type 4 for rid 0x18, but the BAR says it is an
memio
device_attach: ata3 attach returned 6
pci4: <display, VGA> at device 4.0 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x1100-0x113f mem 0x28420000-0x2843ffff,0x28400000-0x2841ffff irq 17 at device
5.0 on pci4
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x28420000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0x1100
em1: bpf attached
em1: Ethernet address: 00:19:d1:29:87:41
em1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf irq 18 at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
atapci2: <Intel ICH7 SATA300 controller> port
0x30c8-0x30cf,0x30e4-0x30e7,0x30c0-0x30c7,0x30e0-0x30e3,0x30a0-0x30af mem
0x28600000-0x286003ff irq 19 at device 31.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30a0
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c8
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30e4
ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=ff devices=0x0
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30c0
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30e0
ata5: reset tp1 mask=03 ostat0=7f ostat1=50
ata5: stat0=0x7f err=0x00 lsb=0xff msb=0xff
ata5: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=7f stat1=50 devices=0x2<ATA_SLAVE>
ata5: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
sio0: irq maps: 0x4c01 0x4c11 0x4c01 0x4c01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4c01 0x4c01 0x4c01 0x4c01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750198 hz
Timecounter "TSC" frequency 2995507395 Hz quality -100
Timecounters tick every 1.000 msec
lo0: em1: Link is up 100 Mbps Full Duplex
bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA33 on ICH7 chip
acd0: <COMBO 52X32X52X/RTJ1> CDRW drive at ata0 as master
acd0: 1536KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad11: 76319MB <WDC WD800JD-22LSA0 06.01D06> at ata5-slave SATA150
ad11: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad11
ad11: Intel check1 failed
ad11: Adaptec check1 failed
ad11: LSI (v3) check1 failed
ad11: LSI (v2) check1 failed
ad11: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 0
INTR: Assigning IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 1
INTR: Assigning IRQ 15 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
INTR: Assigning IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 1
INTR: Assigning IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad7s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem
<fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad11s1a\^H \^H\^H \^H\^H \^H\^H \^H\^H \^H\^H \^H\^H \^H\^H
\^H\^H \^H\^H \^H\^H \^H?
List of GEOM managed disk devices:
ad11s1d ad11s1c ad11s1b ad11s1a ad11s1 ad11 acd0
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem
<fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:ad11s1a
Trying to mount root from ufs:ad11s1a
start_init: trying /sbin/init
em1: Link is Down
em1: Link is up 100 Mbps Full Duplex