Mikhail Manuylov
2006-Dec-17 09:30 UTC
copying data from ata disk to sata disk makes my box panic
Hello folks,
My dmesg can be seen below after text.
It's Pentium MMX with 128MB
Promise SATA controller with 250GB SATA disk -> ad4
and 40GB IDE disk -> ad0 (with freebsd installed)
Here's long time problem that I discontinued to solve, but now i can
go further, cause I really want my strorage.
Here's brief problem description:
I've recently cvsuped sources to 6_RELENG, rebuild world and kernel.
Base system lives on ad0. And when I don't touch ad4 everything is
fine, uptime is long and life is a peachy. I can fdisk ad4, I can
bsdlabel and newfs it. I can dd /dev/zero to it. I can even copy file
one by one from ad0. But if I starting copying or dding something
heavy (#dd if=/dev/ad0 of=/dev/ad4 bs=8m or #cp -R /usr/ports
/mnt/ad4_mount) I got 2 ways of behaviour:
1) Restart
2) db> prompt
At this moment I do not have a serial cable near debugged box, so I'm
retyping trace from screen:
[thread pid 10 tid 100006]
Stopped at cpu_idle_default+0x5: popl %ebp
db> trace
Tracing pid 10 tid 100006 td 0xc1538600
cpu_idle_default (c1537c90, c7b4fd24, c0476218, 0, c7b4fd38, ....) at
cpu_idle_default + 0x5
idle_proc (0, c7b4fd38, 0, c047640d, 0, ....) at idle_proc + 0x11
fork_exit (c047640d, 0, c7b4fd38) at fork_exit + 0x6a
fork_trampoline () at fork_trampoline + 0x8
--- trap 0x1, eip=0. esp=0x7b4fd6c, ebp=0 ---
Dump is not working: sytem hangs deadly, but IS configured via dumpdev
variable and /etc/rc.d/dumpon start.
db> panic
HANG
Hope this helps problem debugged, I can reproduce it and support
additional info from db>.
Maybe next week i'll figure out how to o
I have a custom kernel:
#
# Kernel config file for Print Server and Default Gateway
#
machine i386
cpu I586_CPU
cpu I686_CPU
ident FOORY
# To statically compile in device wiring instead of /boot/device.hints
#hints "FOORY.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options KDB
options DDB
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MD_ROOT # MD is a potential root device
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
#options PROCFS # Process filesystem (requires PSEUDOFS)
#options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
#options KTRACE # ktrace(1) support
#options SYSVSHM # SYSV-style shared memory
#options SYSVMSG # SYSV-style message queues
#options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
#options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptivei.
# Security
#options IPSEC
#options IPSEC_ESP
options TCP_DROP_SYNFIN #Drop TCP packets with SYN+FIN enabled
# ipfw2
#Firewall and NAT support
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=10 #limit verbosity
options IPFIREWALL_FORWARD #enable transparent proxy support
#options IPFIREWALL_FORWARD_EXTENDED # see /usr/src/UPDATING
options IPDIVERT #divert sockets
options IPSTEALTH #support for stealth forwarding
#options DUMMYNET # traffic shaper, see ipfw(8)
options HZ=1000 # for dummynet
# The real QoS
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
#options ALTQ_CDNR
options ALTQ_PRIQ
#options ALTQ_NOPCC
#options ALTQ_DEBUG
#options NO_LKM
#options NO_KLD #http://people.freebsd.org/~cjc/kld_stable.patch
#
#device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
#device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
device vga # VGA video card driver
# To include support for VESA video modes
#options VESA
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
options SC_DISABLE_REBOOT #Don't restart when Ctrl+Alt+Del pressed
options SC_NO_SYSMOUSE # moused(8) will suck
options SC_DISABLE_KDBKEY
options SC_PIXEL_MODE
options SC_DFLT_FONT
#makeoptions SC_DFLT_FONT=koi8-r
makeoptions SC_DFLT_FONT=cp866
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
options SC_KERNEL_CONS_ATTR=(FG_LIGHTRED|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
options SC_HISTORY_SIZE=2000
#options SC_NO_HISTORY # I'm secure or just paranoid ?
# see src/sys/i386/include/pc/display.h for more colors
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
#device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
#device miibus # MII bus support
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
options DEVICE_POLLING # Don't forget to enable kern.polling.enable
# Pseudo devices - the number indicates how many units to allocate.
#device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
# PPP software compression
#options PPP_BSDCOMP #PPP BSD-compress support
#options PPP_DEFLATE #PPP zlib/deflate/gzip support
#options PPP_FILTER #enable PPP filtering via bpf (needs bpf)
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
#options NETSMB #SMB/CIFS requester
#options NETSMBCRYPTO #encrypted password support for SMB
#options SMBFS #SMB/CIFS filesystem
#options LIBMCHAIN #mbuf management library
#options LIBICONV
#end 4SMB
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
#options UCONSOLE #Allow users to grab the console
# System Management Bus support
#device smbus # Bus support, required for smb below.
#device intpm # Intel PIIX4 (82371AB, 82443MX) Power Management Unit
options ENABLE_ALART # control alarm
#device smb # standard io through
## I2C Bus Support
#device iicbus # Bus support, required for ic/iic/iicsmb below.
#device iicbb # generic bit-banging master-only driver
# for lpbb (parallel port specific bit-banging interface)
# and bktr (Brooktree848 video chipset, hardware and software
# master-only interface)
#device ic # network IP interface
#device iic # general i/o operation
#device iicsmb # smb over i2c bridge
#device pcf # Philips PCF8584 master/slave interface
dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #1: Sun Dec 17 02:26:38 MSK 2006
root@XXXX.XXXXX.XXX:/usr/obj/usr/src/sys/FOORY
WARNING: MPSAFE network stack disabled, expect reduced performance.
link_elf: symbol iicbus_intr undefined
KLD file pcf.ko - could not finalize loading
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (233.87-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (128 MB)
avail memory = 125751296 (119 MB)
Intel Pentium detected, installing workaround for F00F bug
cpu0 on motherboard
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xf000-0xf00f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6000-0x601f irq 11
at de
vice 1.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x5c00-0x5c0f irq
9 at
device 1.3 on pci0
intpm0: I/O mapped 5c00
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus1: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus1
intpm0: PM I/O mapped 5800
pci0: <display, VGA> at device 9.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x6800-0x683f mem
0xe1221000-0xe1221ff
f,0xe1000000-0xe10fffff irq 12 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:04:ac:13:ae:e6
fxp0: [GIANT-LOCKED]
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x6c00-0x6c1f mem
0xe1220000-0xe1220ff
f,0xe1100000-0xe11fffff irq 9 at device 11.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:04:ac:25:54:a4
fxp1: [GIANT-LOCKED]
atapci1: <Promise PDC40718 SATA300 controller> port
0x7000-0x707f,0x7400-0x74ff
mem 0xe1222000-0xe1222fff,0xe1200000-0xe121ffff irq 10 at device 12.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcdfff
on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
speaker0: <PC speaker> at port 0x61 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
speaker1: <PC speaker> at port 0x61 on isa0
speaker1: Already attached!
device_attach: speaker1 attach returned 6
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ugen0: American Power Conversion Smart-UPS 750 FW:651.12.I USB FW:4.2, rev 1.10/
0.06, addr 2
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, defau
lt to deny, logging limited to 10 packets/entry by default
ad0: 32253MB <SAMSUNG SP0411N TW100-08> at ata0-master UDMA33
ad4: 238475MB <SAMSUNG SP2504C VT100-33> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/log was not properly dismounted
WARNING: /data was not properly dismounted
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 0
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 0
--
Truly yours, Mikhail Manuilov