With further investigation, it looks like I am having the same problem
as this guy [1] and will follow Robert Watson's advice and upgrade to
6.1-RC1.
Dan
[1] http://lists.freebsd.org/pipermail/freebsd-stable/2006-December/031405.html
On Thu, Dec 14, 2006 at 10:35:47AM -0600, Dan Rue wrote:> Cheers,
>
> Finally got a good error message and crash dump for a problem i'm
experiencing
> in 6.1-RELEASE. Let me know if there's more info I can provide.
>
> from /var/log/messages:
> Dec 13 01:17:23 leopard kernel: twa0: ERROR: (0x03: 0x0100): SGL entry
contains zero data: address=0x0, length=0x0, cmd=W
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): WRITE(16). CDB: 8a 0 0 0
0 1 45 8f 77 c0 0 0 0 20 0 0
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): CAM Status: SCSI Status
Error
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): SCSI Status: Check
Condition
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): ILLEGAL REQUEST asc:26,0
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): Invalid field in
parameter list
> Dec 13 01:17:23 leopard kernel: (da0:twa0:0:0:0): Unretryable error
> Dec 13 01:17:23 leopard kernel:
g_vfs_done():da0[WRITE(offset=2796542722048, length=16384)]error = 22
>
>
> kgdb:
> #0 doadump () at pcpu.h:165
> 165 __asm __volatile("movl %%fs:0,%0" :
"=r" (td));
> (kgdb) backtrace
> #0 doadump () at pcpu.h:165
> #1 0xc064dee1 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:402
> #2 0xc064e178 in panic (fmt=0xc08b8f9a
"initiate_write_inodeblock_ufs2: already started") at
/usr/src/sys/kern/kern_shutdown.c:558
> #3 0xc079ad62 in initiate_write_inodeblock_ufs2 (inodedep=0xca2c2780,
bp=0x0) at /usr/src/sys/ufs/ffs/ffs_softdep.c:4013
> #4 0xc079a52f in softdep_disk_io_initiation (bp=0xd8caed20) at
/usr/src/sys/ufs/ffs/ffs_softdep.c:3748
> #5 0xc07a2ae1 in ffs_geom_strategy (bo=0xc4e55940, bp=0xd8caed20) at
buf.h:422
> #6 0xc0692998 in bufwrite (bp=0xd8caed20) at buf.h:415
> #7 0xc07a29ba in ffs_bufwrite (bp=0xd8caed20)
> at /usr/src/sys/ufs/ffs/ffs_vfsops.c:1710
> #8 0xc06943c7 in vfs_bio_awrite (bp=0xd8caed20) at buf.h:399
> #9 0xc069b3f8 in vop_stdfsync (ap=0xe501ccc0) at
/usr/src/sys/kern/vfs_default.c:412
> #10 0xc06029ab in devfs_fsync (ap=0xe501ccc0) at
/usr/src/sys/fs/devfs/devfs_vnops.c:307
> #11 0xc0852ef8 in VOP_FSYNC_APV (vop=0x0, a=0x0) at vnode_if.c:1020
> #12 0xc06a3cd8 in sync_vnode (bo=0xc4e55940, td=0xc4ba3a80) at
vnode_if.h:537
> #13 0xc06a3ff1 in sched_sync () at /usr/src/sys/kern/vfs_subr.c:1679
> #14 0xc0638524 in fork_exit (callout=0xc06a3d9c <sched_sync>,
arg=0x0, frame=0xe501cd38) at /usr/src/sys/kern/kern_fork.c:805
> #15 0xc0830cfc in fork_trampoline () at
/usr/src/sys/i386/i386/exception.s:208
>
>
> uname:
> FreeBSD leopard.xxx.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Tue May 9
11:47:55 CDT 2006 drue@leopard.xxx.com:/usr/obj/usr/src/sys/GENERIC i386
>
>
> full dmesg:
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-RELEASE #0: Tue May 9 11:47:55 CDT 2006
> drue@leopard.xxx.com:/usr/obj/usr/src/sys/GENERIC
> ACPI APIC Table: <A M I OEMAPIC >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
> Logical CPUs per core: 2
> real memory = 1073676288 (1023 MB)
> avail memory = 1041735680 (993 MB)
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> kbd1 at kbdmux0
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xac00-0xac1f mem 0xfc4e0000-0xfc4fffff irq 18 at device 1.0 on pci1
> em0: Ethernet address: 00:04:23:b0:ea:8c
> pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> 3ware device driver for 9000 series storage controllers, version:
3.60.02.012
> twa0: <3ware 9000 series Storage Controller> port 0xb800-0xb8ff mem
0xfc5ffc00-0xfc5ffcff,0xfb800000-0xfbffffff irq 25 at device 3.0 on pci2
> twa0: [GIANT-LOCKED]
> twa0: INFO: (0x15: 0x1300): Controller details:: Model 9500S-12, 12 ports,
Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051
> uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 16 at
device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 19 at
device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <base peripheral> at device 29.4 (no driver attached)
> ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff
irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb2: EHCI version 1.0
> usb2: companion controllers, 2 ports each: usb0 usb1
> usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <display, VGA> at device 0.0 (no driver attached)
> fxp0: <Intel 82551 Pro/100 Ethernet> port 0xcc00-0xcc3f mem
0xfe6fe000-0xfe6fefff,0xfe6a0000-0xfe6bffff irq 17 at device 1.0 on pci3
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:04:23:b0:ea:8d
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 6300ESB UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <Intel 6300ESB SATA150 controller> port
0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd40f irq 18 at
device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
> sio0: type 16550A, console
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xca7ff,0xca800-0xcbfff,0xe0000-0xe3fff
on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> Timecounter "TSC" frequency 2992515817 Hz quality 800
> Timecounters tick every 1.000 msec
> acd0: CDROM <SR244W/T01A> at ata1-master UDMA33
> ad4: 76319MB <Seagate ST380817AS 3.42> at ata2-master SATA150
> da0 at twa0 bus 0 target 0 lun 0
> da0: <AMCC 9500S-12 DISK 2.06> Fixed Direct Access SCSI-3 device
> da0: 100.000MB/s transfers
> da0: 2860920MB (5859164160 512 byte sectors: 255H 63S/T 364716C)
> Trying to mount root from ufs:/dev/ad4s1a
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"