Todor Dragnev
2006-Nov-25 14:37 UTC
kernel panic(trap 18) on 5.5 and 6.2 with compact flash adapter
Hi,
I have problems with both FreeBSD 6.2 and FreeBSD 5.5 when attach CF
adapter(IDE) with 1GB flash card(kingston). Card is not recognized on FreeBSD
here is part of dmesg.
-- from dmesg (freebsd 5.5) --
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to
accept, logging limited to 100 packets/entry by default
ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR>
error=4<ABORTED>
ad0: 977MB <Hitachi XX.V.3.5.0.0/Rev 0.00> [1987/16/63] at ata0-master
PIO4
On the same position - exactly after IPFW output, both kernels GENERIC (6.1)
and custom build (6.2 prerelease) went into kernel panic (trap 18) (sorry I
can't provide dump output).
When I remove CF adapter all works fine. On the same machine I boot Ubuntu
and don't have these problems.
If someone can help I will try to give more information.
--
There are no answers, only cross references.
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.5-RELEASE-p8 #0: Sat Nov 25 19:02:53 UTC 2006
root@sunrise:/usr/obj/usr/src/sys/SUNRISE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3700+ (2210.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20f71 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 513318912 (489 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.APC3 has invalid initial irq 3, ignoring
ACPI link \\_SB_.PCI0.APC2 has invalid initial irq 5, ignoring
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 22 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
pci0: <serial bus, USB> at device 2.1 (no driver attached)
atapci0: <nVidia nForce4 UDMA133 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port
0xcc00-0xcc0f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 20 at device
7.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
atapci2: <GENERIC ATA controller> port
0xb800-0xb80f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 22 at device
8.0 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xac00-0xac1f irq 17 at device
7.0 on pci1
ed0: Ethernet address: 48:54:e8:2b:97:b9
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit)
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7
on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2210196102 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to
accept, logging limited to 100 packets/entry by default
ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR>
error=4<ABORTED>
ad0: FAILURE - SETFEATURES ENABLE WCACHE status=51<READY,DSC,ERROR>
error=4<ABORTED>
ad0: 977MB <Hitachi XX.V.3.5.0.0/Rev 0.00> [1987/16/63] at ata0-master
PIO4
ad0: FAILURE - READ status=51<READY,DSC,ERROR>
error=10<NID_NOT_FOUND> LBA=252166657
ad0: FAILURE - READ status=51<READY,DSC,ERROR>
error=10<NID_NOT_FOUND> LBA=1
ad0: FAILURE - READ status=51<READY,DSC,ERROR>
error=10<NID_NOT_FOUND> LBA=2
ad0: FAILURE - READ status=51<READY,DSC,ERROR>
error=10<NID_NOT_FOUND> LBA=1
ad0: FAILURE - READ status=51<READY,DSC,ERROR>
error=10<NID_NOT_FOUND> LBA=1
ad8: 78533MB <Hitachi HDS721680PLA380/P21OA70A> [159560/16/63] at
ata4-master PIO4
Mounting root from ufs:/dev/ad8s1a
-------------- next part --------------
none0@pci0:0:0: class=0x058000 card=0x71251462 chip=0x005e10de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 Memory Controller'
class = memory
isab0@pci0:1:0: class=0x060100 card=0x71251462 chip=0x005010de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
none1@pci0:1:1: class=0x0c0500 card=0x71251462 chip=0x005210de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 SMBus'
class = serial bus
subclass = SMBus
ohci0@pci0:2:0: class=0x0c0310 card=0x71251462 chip=0x005a10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 USB Controller'
class = serial bus
subclass = USB
none2@pci0:2:1: class=0x0c0320 card=0x71251462 chip=0x005b10de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 USB 2.0 Controller'
class = serial bus
subclass = USB
atapci0@pci0:6:0: class=0x01018a card=0x71251462 chip=0x005310de rev=0xf2
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 Parallel ATA Controller'
class = mass storage
subclass = ATA
atapci1@pci0:7:0: class=0x010185 card=0x71251462 chip=0x005410de rev=0xf3
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 Serial ATA Controller'
class = mass storage
subclass = ATA
atapci2@pci0:8:0: class=0x010185 card=0x71251462 chip=0x005510de rev=0xf3
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 Serial ATA Controller'
class = mass storage
subclass = ATA
pcib1@pci0:9:0: class=0x060401 card=0x00000000 chip=0x005c10de rev=0xa2 hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI Bridge'
class = bridge
subclass = PCI-PCI
none3@pci0:10:0: class=0x068000 card=0x71251462 chip=0x005710de rev=0xa3
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce4 Ethernet Controller'
class = bridge
pcib2@pci0:11:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3
hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:12:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3
hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib4@pci0:13:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3
hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib5@pci0:14:0: class=0x060400 card=0x00000040 chip=0x005d10de rev=0xa3
hdr=0x01
vendor = 'NVIDIA Corporation'
device = 'nForce4 PCI Express Bridge'
class = bridge
subclass = PCI-PCI
hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport Technology
Configuration'
class = bridge
subclass = HOST-PCI
hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
ed0@pci1:7:0: class=0x020000 card=0x00000000 chip=0x09401050 rev=0x00 hdr=0x00
vendor = 'Winbond Electronics Corp.'
device = 'W89C940 NE2000-Compatible Ethernet Adapter'
class = network
subclass = ethernet
none4@pci5:0:0: class=0x030000 card=0x00000000 chip=0x016a10de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA