Hi,
When I try to boot the FreeBSD 6.2-RC kernel as of today on an ASUS
Vintage AH-3 system (Athlon XP 3000+), I get a similar error message to
that described in this thread:
http://www.mail-archive.com/freebsd-questions@freebsd.org/msg150224.html
... i.e. "atapci2: AHCI controller reset failure". I do not see this
problem with 6.1-RELEASE. As the root disk for this machine is SATA,
this means I cannot boot 6.2.
The onboard controller is an AcerLabs M5287. A JMicron card is in the
machine's single PCI-e slot which is why the onboard SATA is numbered
atapci2. ATA_STATIC_ID is enabled in my kernel configuration. There is
nothing connected to the JMicron card; it is detected successfully under
both 6.1 and 6.2.
I've attached the kernel config and a dmesg of a successful 6.1 boot.
For some reason I can't get loader-time serial console to work on this
machine, so regrettably can't provide a full 6.2-RC1 dmesg.
Thanks for any help you can provide.
Regards,
BMS
-------------- next part --------------
#
# $Id$
#
# Configuration for ASUS Vintage amd64
#
machine amd64
cpu HAMMER
ident ANGLEPOISE
maxusers 0
makeoptions KERNEL=kernel
# Disable non-optimal GCC builtin functions
makeoptions CONF_CFLAGS=-fno-builtin
# Additional roll-ins
makeoptions FDC_PCCARD=0 #do not build pcmcia floppy support
# Kernel Debugging options
makeoptions DEBUG=-g #Build kernel with full symbols
options INCLUDE_CONFIG_FILE #Include this file in kernel
options ADAPTIVE_GIANT
options KDB
options KDB_TRACE #backtrace on ddb entry
options GDB
options DDB #Enable the kernel debugger
options KTRACE #ktrace(1) support
#
# Only build the following modules
#
makeoptions MODULES_OVERRIDE="nmdm nfsclient nfsserver an speaker bridge
if_gre if_disc if_faith if_gif if_tun if_sl if_ppp if_stf if_tap if_vlan ubsa
ucom uvisor udbp udf uhid ukbd ulpt uscanner ums umass umodem uplcom uvscom
uftdi sound/driver/ich sound/sound procfs linprocfs md vpo plip ppi lpt
splash/bmp splash/pcx dummynet crypto cryptodev rndtest aio libiconv cbb cardbus
exca pccard libmchain ntfs syscons/blank syscons/daemon syscons/logo fdc wlan
rc4 ugen firewire firewire/sbp firewire/fwe firewire/fwip firewire/sbp_targ usb
msdosfs drm/drm drm/i915 fxp ath ath_rate_amrr ath_hal
netgraph/bluetooth/bluetooth netgraph/bluetooth/hci netgraph/bluetooth/l2cap
netgraph/bluetooth/socket netgraph/bluetooth/h4 netgraph/bluetooth/ubt
netgraph/bluetooth/ubtbcmfw smbfs"
# Process Scheduler
options SCHED_4BSD #Use the non-experimental scheduler
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
# system personalities
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options COMPAT_FREEBSD5 #Compatible with FreeBSD5
options COMPAT_IA32
options COMPAT_LINUX32
# SYSV extensions
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
# IP networking
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options ZERO_COPY_SOCKETS #enable zero copy socket code
# Disk geometry (GEOM) subsystem
options GEOM_MBR #i386 MBRs
options GEOM_BSD #BSD disklabels
options GEOM_VOL #get volume names from FFS superblock
options GEOM_BDE #GEOM disk encryption
#options GEOM_GPT # this panics kernel don't know why
# FFS options
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
# Are these actually needed, for UFS2?
options UFS_ACL #Support for access control lists
options UFS_EXTATTR
options UFS_EXTATTR_AUTOSTART
# Other FS options
options MD_ROOT #MD is a potential root device
options CD9660 #ISO 9660 Filesystem
options PSEUDOFS #Pseudo-filesystem framework
options PROCFS #Process filesystem (requires PSEUDOFS)
device io
device mem
# Commodity buses
device isa
device pci
device agp
device acpi
device atpic
# CAM API (SCSI high-level layer)
device scbus
device ch
device da
device sa
device cd
device ses
device pt
device targ
device targbh
device pass
options SCSI_DELAY=1000 #1s delay on probe/reset
options CAMDEBUG #Include SCSI debug code
device ata #ATA/ATAPI bus support
device ataraid #ATA raid support
device atadisk #ATA disk drives
device atapicd #ATAPI CDROM drives
options ATA_STATIC_ID #Static ATA device numbering
# XXX: This causes weird boot panics
#device atapicam #ATAPI -> SCSI (requires CAM)
# SCSI options
options SCSI_DELAY=2000 #Delay (in ms) before probing SCSI
# Keyboard and mouse
device atkbdc #AT keyboard controller
device atkbd #AT keyboard
device kbdmux
device psm #PS/2 mouse (requires atkbdc)
options PSM_HOOKRESUME #hook the system resume event, useful
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
options KBD_INSTALL_CDEV #create /dev/kbdN
# Basic video card support
device vga #VGA video card driver
#options VESA # VESA BIOS support (as module)
options FB_INSTALL_CDEV #create /dev/fbN
# System console
device sc #SCO-style console driver
device splash #Splash screen support
options MAXCONS=16 #number of virtual consoles
options SC_ALT_MOUSE_IMAGE #simplified mouse cursor in text mode
options SC_PIXEL_MODE #add support for the raster text mode
options SC_DISABLE_KDBKEY #disable `debug' key
options SC_DISABLE_REBOOT #disable reboot key sequence
device puc # PCI comms
device uart # Serial comms
device ppc # parallel port
device ppbus # Parallel port bus (required)
device miibus # MII bus support
# Pseudo devices
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device pty # Pseudo-ttys (telnet etc)
device bpf # Berkeley packet filter
# PF
device pf #PF OpenBSD packet-filter firewall
device pflog #logging support interface for PF
device pfsync #synchronization interface for PF
# ALTQ bandwidth shaping
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options ALTQ_NOPCC # required for SMP
options ALTQ_CDNR # traffic conditioner
options ALTQ_DEBUG
# IPSEC
#options FAST_IPSEC #new IPsec (cannot define w/ IPSEC)
#options IPSEC_DEBUG #debug for IP security
device crypto
device cryptodev
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p8 #0: Sun Nov 19 19:46:49 GMT 2006
root@anglepoise.lon.incunabulum.net:/usr/src/sys/amd64/compile/ANGLEPOISE
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1800.07-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 1039859712 (991 MB)
avail memory = 995389440 (949 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port
0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem
0xfe5fe000-0xfe5fffff irq 19 at device 0.0 on pci3
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
pcib4: <ACPI PCI-PCI bridge> at device 25.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <network, ethernet> at device 16.0 (no driver attached)
pci4: <serial bus, FireWire> at device 18.0 (no driver attached)
pci0: <serial bus, USB> at device 28.0 (no driver attached)
pci0: <serial bus, USB> at device 28.1 (no driver attached)
pci0: <serial bus, USB> at device 28.2 (no driver attached)
pci0: <serial bus, USB> at device 28.3 (no driver attached)
pci0: <multimedia> at device 29.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 30.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 30.1 (no driver attached)
atapci1: <AcerLabs M5229 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 31.0 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <AcerLabs M5287 SATA150 controller> port
0xec00-0xec0f,0xe880-0xe887,0xe800-0xe80f,0xe480-0xe487,0xe400-0xe41f mem
0xfebff800-0xfebffbff irq 21 at device 31.1 on pci0
ata5: <ATA channel 0> on atapci2
ata6: <ATA channel 1> on atapci2
ata7: <ATA channel 2> on atapci2
ata8: <ATA channel 3> on atapci2
acpi_button0: <Power Button> on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xccfff,0xcd000-0xcdfff,0xce000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounter "TSC" frequency 1800071742 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDROM <SONY DVD-ROM DDU1615/FYS3> at ata1-master UDMA33
ad10: 157066MB <WDC WD1600YD-01NVB1 10.02E01> at ata5-master SATA150
Trying to mount root from ufs:/dev/ad10s2a
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfebfc000-0xfebfcfff irq 17 at device 28.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfebfd000-0xfebfdfff irq 18 at device 28.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfebfe000-0xfebfefff irq 19 at device 28.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0: <ALi M5239 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 23 at
device 28.3 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 3 ports each: usb0 usb1 usb2
usb3: <ALi M5239 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem
0xfeaff000-0xfeafffff,0xfe900000-0xfe9fffff irq 17 at device 16.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:59:40:2c
fxp0: link state changed to DOWN
fxp0: link state changed to UP