Any suggestions on this? The card in question one supplied by
Toshiba in their laptops.
ath0: <Atheros 5424> irq 17 at device 0.0 on pci3
ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
ath0: cannot map register space
device_attach: ath0 attach returned 6
From lsci -v
03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown
device 001c (rev 01) Subsystem: Askey Computer Corp. Unknown device
7096 Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at <unassigned> (64-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Vulpes Velox wrote:> Any suggestions on this? The card in question one supplied by > Toshiba in their laptops. > > ath0: <Atheros 5424> irq 17 at device 0.0 on pci3 > ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). > ath0: cannot map register space > device_attach: ath0 attach returned 6 > > > From lsci -v > > 03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown > device 001c (rev 01) Subsystem: Askey Computer Corp. Unknown device > 7096 Flags: bus master, fast devsel, latency 0, IRQ 17 > Memory at <unassigned> (64-bit, non-prefetchable) > Capabilities: [40] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: 64bit- > Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint IRQ 0 > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1This is likely an ACPI/ASL issue. I saw this on an hp nx6125 laptop when trying to use the express card slot. The BIOS did not identify how to map the resources associated with the bridge. Sam
On Fri, 29 Sep 2006 23:05:14 -0700 Sam Leffler <sam@errno.com> wrote:> Vulpes Velox wrote: > > Any suggestions on this? The card in question one supplied by > > Toshiba in their laptops. > > > > ath0: <Atheros 5424> irq 17 at device 0.0 on pci3 > > ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). > > ath0: cannot map register space > > device_attach: ath0 attach returned 6 > > > > > > From lsci -v > > > > 03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown > > device 001c (rev 01) Subsystem: Askey Computer Corp. Unknown > > device 7096 Flags: bus master, fast devsel, latency 0, IRQ 17 > > Memory at <unassigned> (64-bit, non-prefetchable) > > Capabilities: [40] Power Management version 2 > > Capabilities: [50] Message Signalled Interrupts: 64bit- > > Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint IRQ 0 > > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > > This is likely an ACPI/ASL issue. I saw this on an hp nx6125 laptop > when trying to use the express card slot. The BIOS did not > identify how to map the resources associated with the bridge.Very possibly given some of the funny stuff that shows up in dmesg if I when I poll the processor frequency and temp. Going to check into the ACPI list, iirc there is one, when I get home tomorrow then. Any suggestions on other places to check as well or the like?
-----Original Message----- From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd-stable@freebsd.org] On Behalf Of Vulpes Velox Sent: Saturday, September 30, 2006 9:04 AM To: Sam Leffler Cc: freebsd-stable@freebsd.org Subject: Re: ath0 attach problems On Fri, 29 Sep 2006 23:05:14 -0700 Sam Leffler <sam@errno.com> wrote:> Vulpes Velox wrote: > > Any suggestions on this? The card in question one supplied by > > Toshiba in their laptops. > > > > ath0: <Atheros 5424> irq 17 at device 0.0 on pci3 > > ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). > > ath0: cannot map register space > > device_attach: ath0 attach returned 6 > > > > > > From lsci -v > > > > 03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown > > device 001c (rev 01) Subsystem: Askey Computer Corp. Unknown > > device 7096 Flags: bus master, fast devsel, latency 0, IRQ 17 > > Memory at <unassigned> (64-bit, non-prefetchable) > > Capabilities: [40] Power Management version 2 > > Capabilities: [50] Message Signalled Interrupts: 64bit- > > Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint IRQ 0 > > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > > This is likely an ACPI/ASL issue. I saw this on an hp nx6125 laptop > when trying to use the express card slot. The BIOS did not > identify how to map the resources associated with the bridge.Very possibly given some of the funny stuff that shows up in dmesg if I when I poll the processor frequency and temp. Going to check into the ACPI list, iirc there is one, when I get home tomorrow then. Any suggestions on other places to check as well or the like? [Dustin Coates] Also try freebsd-mobile, as they may have encountered this problem before. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"