On Sun, Aug 13, 2006 at 04:30:31PM +0200, Zoran Kolic
wrote:> Hi all!
> I would like to add nfpm device
> into kernel, but cannot find it
> in source. Googling for awile,
> I've found a lot of posts on nfsmb,
> broken compilings...
> In this moment looks to me that the
> correct way should be to add smbus,
> smb and nfpm. Since nfsmb is taken
> from sensors, do I compile zombie
> device.
> Mobo is asus nforce3 k8n 250, 6.1
> and amd64.
>
> none0@pci0:1:1: class=0x0c0500 card=0x813f1043 chip=0x00e410de rev=0xa1
hdr=0x00
> vendor = 'NVIDIA Corporation'
> device = 'nForce PCI SMB Controller'
> class = serial bus
> subclass = SMBus
>
You motherboard is nForce3 based so you don't need
nfpm. nfpm is just an alias for amdpm, so this is
probably why you can't find its sources:
# grep nfpm sys/conf/files
pci/amdpm.c optional amdpm pci | nfpm pci
# amdpm AMD 756 Power Management Unit
# amdsmb AMD 8111 SMBus 2.0 Controller
# nfpm NVIDIA nForce Power Management Unit
# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
I've written amdsmb for Asus SK8N, only to find out
that there are no sensors attached to it. :-)
Cheers,
--
Ruslan Ermilov
ru@FreeBSD.org
FreeBSD committer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060813/dedaa583/attachment.pgp