Mike Jakubik
2006-May-03 19:36 UTC
Repetitive device (hpt37x) naming during bootup on 6.1-RC
This is an odd cosmetic bug, this is what i see when the system boots:
atapci1: <HighPoint HighPoint HighPoint HighPoint Hi UDMA133 controller>
port
0xb800-0xb807,0xbc00-0xbc03,0xc000-0xc007,0xc400-0xc403,0xc800-0xc8ff
irq 10 at device 19.0 on pci0
The system works fine otherwise, I have attached a verbose dmesg.
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Mon May 1 14:45:45 EDT 2006
root@desktop.home.local:/usr/obj/usr/src/sys/XP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bf2000.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0bf2188.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bf2234.
Calibrating clock(s) ... i8254 clock: 1193317 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2105796941 Hz
CPU: AMD Athlon(tm) XP 2600+ (2105.80-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003edb7fff, 1041838080 bytes (254355 pages)
avail memory = 1041760256 (993 MB)
mptable_probe: MP Config Table has bad signature: \^H\M^?\M^?\^A
Table 'FACP' at 0x3fff3040
MADT: No MADT table found
APIC: Could not find any APICs.
bios32: Found BIOS32 Service Directory header at 0xc00fb030
bios32: Entry = 0xfb4a0 (c00fb4a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4d0
pnpbios: Found PnP BIOS data at 0xc00fbfa0
pnpbios: Entry = f0000:bfd0 Rev = 1.0
Other BIOS signatures found:
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdef0
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 16 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 15 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 9 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 A 0x04 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 0 8 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 19 D 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0
ACPI: Found matching pin for 0.15.INTA at func 0: 5
ACPI: Found matching pin for 0.13.INTA at func 0: 5
ACPI: Found matching pin for 0.11.INTA at func 0: 11
ACPI: Found matching pin for 0.9.INTA at func 0: 10
ACPI: Found matching pin for 0.9.INTB at func 2: 11
ACPI: Found matching pin for 0.19.INTA at func 0: 10
ACPI: Found matching pin for 0.17.INTA at func 1: 255
ACPI: Found matching pin for 0.17.INTD at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3099, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base c0000000, size 28, enabled
found-> vendor=0x1106, dev=0xb099, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1102, dev=0x0004, revid=0x04
bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00009000, size 6, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 9 INTA routed to irq 10 via \\_SB_.PCI0.LNKC
found-> vendor=0x1102, dev=0x7003, revid=0x04
bus=0, slot=9, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00009400, size 3, enabled
found-> vendor=0x1102, dev=0x4001, revid=0x04
bus=0, slot=9, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4044000, size 11, enabled
map[14]: type 1, range 32, base e4040000, size 14, enabled
pcib0: matched entry for 0.9.INTB (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 9 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x11c1, dev=0x048c, revid=0x03
bus=0, slot=11, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base e4045000, size 8, enabled
map[14]: type 4, range 32, base 00009800, size 3, enabled
map[18]: type 4, range 32, base 00009c00, size 8, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=0, slot=13, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 7, enabled
map[14]: type 1, range 32, base e4046000, size 7, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 5 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base e4000000, size 17, enabled
map[14]: type 1, range 32, base e4020000, size 17, enabled
map[18]: type 4, range 32, base 0000a400, size 6, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 15 INTA routed to irq 5 via \\_SB_.PCI0.LNKB
found-> vendor=0x1106, dev=0x3074, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a800, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000ac00, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 17 INTD routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 17 INTD routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b400, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 17 INTD routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1103, dev=0x0004, revid=0x05
bus=0, slot=19, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000b800, size 3, enabled
map[14]: type 4, range 32, base 0000bc00, size 2, enabled
map[18]: type 4, range 32, base 0000c000, size 3, enabled
map[1c]: type 4, range 32, base 0000c400, size 2, enabled
map[20]: type 4, range 32, base 0000c800, size 8, enabled
pcib0: matched entry for 0.19.INTA (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 19 INTA routed to irq 10 via \\_SB_.PCI0.LNKC
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe0000000-0xe2ffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x00f1, revid=0xa2
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e0000000, size 24, enabled
pcib1: (null) requested memory range 0xe0000000-0xe0ffffff: good
map[14]: type 3, range 32, base d0000000, size 28, enabled
pcib1: (null) requested memory range 0xd0000000-0xdfffffff: good
map[18]: type 1, range 32, base e1000000, size 24, enabled
pcib1: (null) requested memory range 0xe1000000-0xe1ffffff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce 6600 GT> mem
0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff,0xe1000000-0xe1ffffff irq 11 at
device 0.0 on pci1
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xe0000000
nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000
nvidia0: Reserved 0x1000000 bytes for rid 0x18 type 3 at 0xe1000000
nvidia0: [GIANT-LOCKED]
pcm0: <Creative Audigy 2 (EMU10K2)> port 0x9000-0x903f irq 10 at device
9.0 on pci0
pcm0: Reserved 0x40 bytes for rid 0x10 type 4 at 0x9000
emu: setmap (3ea2b000, 800), nseg=1, error=0
emu: setmap (3ea2a000, 1000), nseg=1, error=0
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D
Enhancement
pcm0: Primary codec extended features AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: [MPSAFE]
emu: setmap (231000, 1000), nseg=1, error=0
emu: setmap (1e1000, 1000), nseg=1, error=0
emu: setmap (25f000, 1000), nseg=1, error=0
emu: setmap (23d000, 1000), nseg=1, error=0
emu: setmap (21b000, 1000), nseg=1, error=0
emu: setmap (3e9d9000, 1000), nseg=1, error=0
emu: setmap (1eb000, 1000), nseg=1, error=0
emu: setmap (209000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 207000, 1000; 0xc4bd3000 -> 207000
pcm0: sndbuf_setmap 205000, 1000; 0xc4bd1000 -> 205000
pci0: <serial bus, FireWire> at device 9.2 (no driver attached)
pci0: <simple comms> at device 11.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem
0xe4046000-0xe404607f irq 5 at device 13.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xe4046000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:04:75:c3:78:4b
xl0: [MPSAFE]
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xa400-0xa43f mem 0xe4000000-0xe401ffff,0xe4020000-0xe403ffff irq 5 at device
15.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe4000000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa400
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:4d:11:8e
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xac00-0xac1f irq 11 at device
17.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xac00
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device
17.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device
17.4 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
atapci1: <HighPoint HighPoint HighPoint HighPoint Hi UDMA133 controller>
port 0xb800-0xb807,0xbc00-0xbc03,0xc000-0xc007,0xc400-0xc403,0xc800-0xc8ff irq
10 at device 19.0 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0xc800
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb800
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc400
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0x401 0x409 0x401 0x401
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd4000-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: Canon CanoScan, rev 2.00/3.05, addr 2
Device configuration finished.
Timecounter "TSC" frequency 2105796941 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
acd0: setting PIO4 on 8233 chip
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: setting UDMA33 on 8233 chip
acd0: <SONY DVD RW DRU-800A/KY06> DVDR drive at ata1 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad4: setting PIO4 on HighPoint chip
ad4: setting UDMA133 on HighPoint chip
ad4: 57259MB <MAXTOR 6L060L3 A93.0500> at ata2-master UDMA133
ad4: 117266688 sectors [116336C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0x40860886
magic_1 0x00000000
order 0x00000004
array_width 2
stripe_shift 7
type RAID0
disk_number 0
total_sectors 234533120
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0>
dummy_2 0x00
name_2 <>
================================================ata3-master: pio=PIO4 wdma=WDMA2
udma=UDMA133 cable=80 wire
ad6: setting PIO4 on HighPoint chip
ad6: setting UDMA133 on HighPoint chip
ad6: 57259MB <MAXTOR 6L060L3 A93.0500> at ata3-master UDMA133
ad6: 117266688 sectors [116336C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: HighPoint (v3) check1 failed
****** ATA Highpoint V2 RocketRAID Metadata *****
magic 0x5a7816f0
magic_0 0x40860886
magic_1 0x00000000
order 0x00000004
array_width 2
stripe_shift 7
type RAID0
disk_number 1
total_sectors 234533120
disk_mode 0x00000000
boot_mode 0x12345678
boot_disk 0x80
boot_protect 0x00
log_entries 0x00
log_index 0x00
rebuild_lba 0x7fffffff
dummy_1 0x00
name_1 <RAID_0>
dummy_2 0x00
name_2 <>
================================================ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
================================================format HighPoint v2
RocketRAID
type RAID0
flags 0x00 0
magic_0 0x0000000040860886
magic_1 0x0000000000000000
generation 0
total_sectors 234533120
offset_sectors 10
heads 255
sectors 63
cylinders 14599
width 2
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 117266560
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 117266560
================================================ar0: 114518MB <HighPoint v2
RocketRAID RAID0 (stripe 64 KB)> status: READY
ar0: 234533120 sectors [14599C/255H/63S] <RAID_0> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY DVD RW DRU-800A KY06> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-800A KY06> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ar0
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ar0s2a
start_init: trying /sbin/init
em0: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex