thr3ads.net - freebsd stable - PCI Radeon 7000/VE (RV100) on AMD64 [Mar 2006]

If this information is useful, please help other people find it:
Share via:

Alastair G. Hogge

2006-Mar-27 08:01 UTC

PCI Radeon 7000/VE (RV100) on AMD64

G'day

Having some problem with Xorg-6.9.0 and the radeon or ati driver on mad64 
system. X seems to look up at a black screen after setting the resolution and 
then resets the computer. I have drm and radeon defined in my kernel config 
and I've also added the appropriate lines to xorg.conf

uname -a returns:
FreeBSD madcat 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #9: Sun Mar 26 20:05:57 
EST 2006     agh@madcat:/usr/obj/usr/src/sys/MADCAT  amd64

dmesg and pciconf are attached

-Al
-------------- next part --------------

   Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980,
   1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the
   University of California. All rights reserved. FreeBSD 6.1-PRERELEASE
   #9: Sun Mar 26 20:05:57 EST 2006
   agh@madcat:/usr/obj/usr/src/sys/MADCAT Timecounter "i8254"
frequency
   1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 FX-60 Dual Core Processor
   (2611.90-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f32
   Stepping = 2 Features=0x178bfbff Features2=0x1 AMD
   Features=0xe2500800,LM,3DNow+,3DNow> real memory = 1073414144 (1023
   MB) avail memory = 1027252224 (979 MB) ACPI APIC Table: FreeBSD/SMP:
   Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1
   (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard rr2320: RocketRAID
   2320 controller driver v1.01 (Jan 17 2006 17:35:15) acpi0: on
   motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast"
   frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at
   3.579545MHz> port 0x508-0x50b on acpi0 cpu0: on acpi0 acpi_throttle0:
   on cpu0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0
   pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no
   driver attached) pci0: at device 0.2 (no driver attached) pci0: at
   device 0.3 (no driver attached) pci0: at device 0.4 (no driver
   attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6
   (no driver attached) pci0: at device 0.7 (no driver attached) pcib1:
   at device 2.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver
   attached) pcib2: at device 3.0 on pci0 pci2: on pcib2 pcib3: at device
   4.0 on pci0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci5: on pcib4
   pcib5: at device 0.2 on pci3 pci4: on pcib5 rr23200: port
   0x8800-0x88ff mem 0xfe800000-0xfe8fffff irq 17 at device 4.0 on pci4
   rr2320: adapter at PCI 4:4:0, IRQ 17 pci0: at device 9.0 (no driver
   attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device
   10.1 (no driver attached) ohci0: mem 0xfebfe000-0xfebfefff irq 21 at
   device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0,
   legacy support usb0: SMM does not respond, resetting usb0: on ohci0
   usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev
   1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered
   ehci0: mem 0xfebffc00-0xfebffcff irq 22 at device 11.1 on pci0 ehci0:
   [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4
   ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: nVidia
   EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with
   10 removable, self powered pcm0: port 0xe400-0xe4ff,0xe000-0xe0ff mem
   0xfebfd000-0xfebfdfff irq 23 at device 13.0 on pci0 pcm0: atapci0:
   port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0
   on pci0 ata0: on atapci0 ata1: on atapci0 atapci1: port
   0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
   mem 0xfebfc000-0xfebfcfff irq 20 at device 16.0 on pci0 ata2: on
   atapci1 ata3: on atapci1 atapci2: port
   0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f
   mem 0xfebfb000-0xfebfbfff irq 21 at device 17.0 on pci0 ata4: on
   atapci2 ata5: on atapci2 pcib6: at device 18.0 on pci0 pci6: on pcib6
   drm0: port 0xb000-0xb0ff mem
   0xd0000000-0xd7ffffff,0xfeaf0000-0xfeafffff irq 17 at device 6.0 on
   pci6 info: [drm] Initialized radeon 1.19.0 20050911 em0: port
   0xbc00-0xbc3f mem 0xfeaa0000-0xfeabffff,0xfea40000-0xfea7ffff irq 16
   at device 7.0 on pci6 em0: Ethernet address: 00:04:23:ac:ac:ea
   fwohci0: mem 0xfeaef800-0xfeaeffff,0xfeae8000-0xfeaebfff irq 17 at
   device 11.0 on pci6 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of
   Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:8a:89:e6
   fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400,
   max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0:
   Fake Ethernet address: 02:11:d8:8a:89:e6 fwe0: Ethernet address:
   02:11:d8:8a:89:e6 fwe0: if_start running deferred for Giant sbp0: SCSI
   over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0:
   node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop
   <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcib7: at
   device 22.0 on pci0 pci7: on pcib7 pcib8: at device 23.0 on pci0 pci8:
   on pcib8 acpi_button0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq
   2 on acpi0 fdc0: [FAST] ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3
   on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE
   mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 ppi0: on
   ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1
   on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: configured irq
   4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0:
   <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
   acpi0 sio0: type 16550A orm0: at iomem 0xc0000-0xcbfff on isa0 sc0: at
   flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1:
   configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be
   enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0:
   KYE Genius USB Wheel Mouse, rev 1.00/2.42, addr 2, iclass 3/1 ums0: 5
   buttons and Z dir. Timecounters tick every 1.000 msec rr2320: start
   channel [0,2] rr2320: start channel [0,3] rr2320: start channel [0,4]
   rr2320: start channel [0,5] rr2320: channel [0,2] started successfully
   rr2320: channel [0,3] started successfully rr2320: channel [0,4]
   started successfully rr2320: channel [0,5] started successfully
   rr23200: [GIANT-LOCKED] da0 at rr23200 bus 0 target 0 lun 0 da0: Fixed
   Direct Access SCSI-0 device da0: 572160MB (1171783680 512 byte
   sectors: 255H 63S/T 72940C) SMP: AP CPU #1 Launched! Trying to mount
   root from ufs:/dev/da0s1a em0: link state changed to UP

Peter Jeremy

2006-Mar-27 18:08 UTC

head link

PCI Radeon 7000/VE (RV100) on AMD64

On Mon, 2006-Mar-27 17:58:32 +1000, Alastair G. Hogge
wrote:>Having some problem with Xorg-6.9.0 and the radeon or ati driver on mad64 
>system. X seems to look up at a black screen after setting the resolution
and
>then resets the computer. I have drm and radeon defined in my kernel config 
>and I've also added the appropriate lines to xorg.conf
How did you build xorg.conf?
>dmesg and pciconf are attached
They have been text filled, making them unintelligible.

Can you please post dmesg and /var/log/Xorg.0.log without text-filling them.

-- 
Peter Jeremy

Nikolas Britton

2006-May-02 20:46 UTC

head link

PCI Radeon 7000/VE (RV100) on AMD64

On 3/27/06, Alastair G. Hogge <agh@tpg.com.au>
wrote:> G'day
>
> Having some problem with Xorg-6.9.0 and the radeon or ati driver on mad64
> system. X seems to look up at a black screen after setting the resolution
and
> then resets the computer. I have drm and radeon defined in my kernel config
> and I've also added the appropriate lines to xorg.conf
>
This may or may not be relavent... but I have a triple-head setup
using three Radeon cards; 1 agp based 8500LE and 2 pci based
7000/VE's.

I've never had DRI / X working... The problem(s) you're having sounds
like the problems I was having... Comment out 'Load  "dri"' in
xorg.conf and try it again.


--
BSD Podcasts @:
http://bsdtalk.blogspot.com/
http://freebsdforall.blogspot.com/

Wilde, Donald

2006-May-03 12:43 UTC

head link

PCI Radeon 7000/VE (RV100) on AMD64

-----Original Message-----
From: owner-freebsd-stable@freebsd.org
[mailto:owner-freebsd-stable@freebsd.org] On Behalf Of Nikolas Britton
Sent: Tuesday, May 02, 2006 2:46 PM
To: Alastair G. Hogge
Cc: freebsd-stable@freebsd.org
Subject: Re: PCI Radeon 7000/VE (RV100) on AMD64

On 3/27/06, Alastair G. Hogge <agh@tpg.com.au>
wrote:> G'day
>
> Having some problem with Xorg-6.9.0 and the radeon or ati driver on 
> mad64 system. X seems to look up at a black screen after setting the 
> resolution and then resets the computer. I have drm and radeon defined
> in my kernel config and I've also added the appropriate lines to 
> xorg.conf
>
This may or may not be relavent... but I have a triple-head setup using
three Radeon cards; 1 agp based 8500LE and 2 pci based 7000/VE's.

I've never had DRI / X working... The problem(s) you're having sounds
like the problems I was having... Comment out 'Load  "dri"' in
xorg.conf
and try it again.

Nikolas, Alistair -

There is still active work going on in the DRI/DRM section of X.org for
ATI/Radeon. There were some partial fixes posted to FreeDesktop.org's
bugzilla, but they require X 6.9.0-CURRENT. Nikolas' suggestion
(commenting Load "DRI") does work, but I was able to get the DRI to
function (with 3D OpenGL) using CURRENT X (as of two months ago; it may
be even better now.)
--
Don Wilde    Org 01737    505-844-1126
If it's there, and you can see it, it's real.
If it's not there, and you can see it, it's virtual.
If it's there, and you can't see it, it's transparent.
If it's not there, and you can't see it, you erased it. -- Vlad Galu

freebsd stable - Mar 2006 - PCI Radeon 7000/VE (RV100) on AMD64

PCI Radeon 7000/VE (RV100) on AMD64

PCI Radeon 7000/VE (RV100) on AMD64

PCI Radeon 7000/VE (RV100) on AMD64

PCI Radeon 7000/VE (RV100) on AMD64