Pavel Gubin
2006-Mar-05 21:42 UTC
"page fault" panices after upgrading 5.4-RELEASE to 6.0-RELEASE/6.1-PRERELEASE
Hello,
I've got some machine which is almost idle and works now almost only as
dialup
server. The problem was that this machine was very stable under 5.4-RELEASE,
but after upgrading (via buildworld/installworld) to 6.0-RELEASE-p4 and then
to 6.1-PRERELEASE (4 days ago) the machine panices (uptime from an hour to
a day or two).
I have some doubt that this due to hardware problem - because 5.4 is quite
stable on this machine.
Below I'm attaching the kernel config, dmesg.boot, backtrace from
6.0-RELEASE-p4 and backtrace from 6.1-PRERELEASE.
Thanx in advance,
--
Pavel Gubin
TUSC&R / Industrial Electronics dept / System Administrator
2:5005/14@fidonet / Phone +7-3822-423067 / ICQ 28835566
-------------- next part --------------
machine i386
cpu I686_CPU
ident Fet
makeoptions DEBUG=-g
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
device apic # I/O APIC
options INCLUDE_CONFIG_FILE
options AUTO_EOI_1
options IPFIREWALL
options IPFIREWALL_FORWARD
options IPFIREWALL_FORWARD_EXTENDED
options IPDIVERT
options DUMMYNET
options LIBALIAS
device isa
device pci
device fdc
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc
device agp # support several AGP chipsets
device npx
device pmtimer
device sio # 8250, 16[45]50 based serial ports
device puc
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device re # RealTek 8139C+/8169/8169S/8110S
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device vge # VIA VT612x gigabit ethernet
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device pty # Pseudo-ttys (telnet etc)
device pf
device pflog
device pfsync
device bpf # Berkeley packet filter
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Thu Mar 2 16:28:07 TSK 2006
pg@lynx.ie.tusur.ru:/var/data/obj/var/data/6s/src/sys/Fet
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (1000.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268349440 (255 MB)
avail memory = 257306624 (245 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSL2-C> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem
0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xd800-0xd8ff mem
0xf3800000-0xf38000ff irq 6 at device 11.0 on pci2
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re0: Ethernet address: 00:40:f4:a9:ca:1e
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port
0xd400-0xd41f,0xd000-0xd01f mem 0xf3000000-0xf3000fff,0xf2800000-0xf2800fff irq
5 at device 13.0 on pci2
sio4: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
sio6: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio6: type 16550A
sio6: unable to activate interrupt in fast mode - using normal mode
sio7: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio7: type 16550A
sio7: unable to activate interrupt in fast mode - using normal mode
puc1: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0xb800-0xb81f,0xb400-0xb41f mem 0xf2000000-0xf2000fff,0xf1800000-0xf1800fff irq
5 at device 13.1 on pci2
sio8: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> on puc1
sio8: type 16550A
sio8: unable to activate interrupt in fast mode - using normal mode
sio9: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> on puc1
sio9: type 16550A
sio9: unable to activate interrupt in fast mode - using normal mode
sio10: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> on puc1
sio10: type 16550A
sio10: unable to activate interrupt in fast mode - using normal mode
sio11: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> on puc1
sio11: type 16550A
sio11: unable to activate interrupt in fast mode - using normal mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
fdc0: No FDOUT register!
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1000312210 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled,
default to deny, logging disabled
ad0: 38166MB <Seagate ST340014A 8.01> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/data was not properly dismounted
re0: link state changed to UP
vlan4: link state changed to UP
vlan3: link state changed to UP
vlan2: link state changed to UP
vlan1: link state changed to UP
vlan0: link state changed to UP
-------------- next part --------------
Dump header from device /dev/ad0s1b
Architecture: i386
Architecture Version: 2
Dump Length: 267956224B (255 MB)
Blocksize: 512
Dumptime: Fri Feb 17 20:58:20 2006
Hostname: fet.fet-x.tusur.ru
Magic: FreeBSD Kernel Dump
Version String: FreeBSD 6.0-RELEASE-p4 #2: Wed Feb 8 13:26:11 TSK 2006
pg@lynx.ie.tusur.ru:/var/data/obj/var/data/6/src/sys/Fet
Panic String: page fault
Dump Parity: 2169387071
Bounds: 9
Dump Status: good
-------------- next part --------------
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for
details.
This GDB was configured as "i386-marcel-freebsd".
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc060457a
stack pointer = 0x28:0xcc7f2ae4
frame pointer = 0x28:0xcc7f2b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 27 (swi1: net)
trap number = 12
panic: page fault
Uptime: 1d13h33m23s
Dumping 255 MB (2 chunks)
chunk 0: 1MB (159 pages) ... ok
chunk 1: 255MB (65259 pages) 239 223 207 191 175 159 143 127 111 95 79 63 47
31 15
#0 doadump () at pcpu.h:165
in pcpu.h
(kgdb) bt full
#0 doadump () at pcpu.h:165
No locals.
#1 0xc04e5a3e in boot (howto=260)
at /var/data/6/src/sys/kern/kern_shutdown.c:399
first_buf_printf = 1
#2 0xc04e5cd4 in panic (fmt=0xc063062d "%s")
at /var/data/6/src/sys/kern/kern_shutdown.c:555
td = (struct thread *) 0xc113e480
bootopt = 260
newpanic = 0
ap = 0xc113e480 "0?\023???\020?"
buf = "page fault", '\0' <repeats 245 times>
#3 0xc06064a8 in trap_fatal (frame=0xcc7f2aa4, eva=0)
at /var/data/6/src/sys/i386/i386/trap.c:831
code = 40
type = 12
ss = 40
esp = 0
softseg = {ssd_base = 0, ssd_limit = 1048575, ssd_type = 27,
ssd_dpl = 0, ssd_p = 1, ssd_xx = 8, ssd_xx1 = 1, ssd_def32 = 1, ssd_gran = 1}
#4 0xc0606213 in trap_pfault (frame=0xcc7f2aa4, usermode=0, eva=0)
at /var/data/6/src/sys/i386/i386/trap.c:742
va = 0
vm = (struct vmspace *) 0x0
map = 0xc0687a80
rv = 1
ftype = 1 '\001'
td = (struct thread *) 0xc113e480
p = (struct proc *) 0xc113d830
#5 0xc0605e71 in trap (frame {tf_fs = -1066926072, tf_es = 40, tf_ds =
-1055719384, tf_edi = -1054599636, tf_esi = 0, tf_ebp = -864081136, tf_isp =
-864081200, tf_ebx = 128, tf_edx = 128, tf_ecx = 32, tf_eax = -1054599636,
tf_trapno = 12, tf_err = 0, tf_eip = -1067432582, tf_cs = 32, tf_eflags =
590338, tf_esp = 0, tf_ss = -1054599112})
at /var/data/6/src/sys/i386/i386/trap.c:432
td = (struct thread *) 0xc113e480
p = (struct proc *) 0xc113d830
sticks = 3239306368
i = 0
ucode = 0
type = 12
code = 0
eva = 0
#6 0xc05f5f5a in calltrap () at /var/data/6/src/sys/i386/i386/exception.s:139
No locals.
#7 0xc060457a in generic_bcopy ()
at /var/data/6/src/sys/i386/i386/support.s:489
No locals.
(kgdb) q
-------------- next part --------------
Dump header from device /dev/ad0s1b
Architecture: i386
Architecture Version: 2
Dump Length: 267956224B (255 MB)
Blocksize: 512
Dumptime: Mon Mar 6 10:08:21 2006
Hostname: fet.fet-x.tusur.ru
Magic: FreeBSD Kernel Dump
Version String: FreeBSD 6.1-PRERELEASE #0: Thu Mar 2 16:28:07 TSK 2006
pg@lynx.ie.tusur.ru:/var/data/obj/var/data/6s/src/sys/Fet
Panic String: page fault
Dump Parity: 3291601711
Bounds: 12
Dump Status: good
-------------- next part --------------
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for
details.
This GDB was configured as "i386-marcel-freebsd".
Unread portion of the kernel message buffer:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc060af7a
stack pointer = 0x28:0xcc7e2ae0
frame pointer = 0x28:0xcc7e2b0c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 27 (swi1: net)
trap number = 12
panic: page fault
Uptime: 50m48s
Dumping 255 MB (2 chunks)
chunk 0: 1MB (159 pages) ... ok
chunk 1: 255MB (65259 pages) 239 223 207 191 175 159 143 127 111 95 79 63 47
31 15
#0 doadump () at pcpu.h:165
165 __asm __volatile("movl %%fs:0,%0" : "=r" (td));
(kgdb) bt full
#0 doadump () at pcpu.h:165
No locals.
#1 0xc04ea306 in boot (howto=260)
at /var/data/6s/src/sys/kern/kern_shutdown.c:399
first_buf_printf = 1
#2 0xc04ea59c in panic (fmt=0xc0638a18 "%s")
at /var/data/6s/src/sys/kern/kern_shutdown.c:555
td = (struct thread *) 0xc1dd4480
bootopt = 260
newpanic = 0
ap = 0xc1dd4480 "08???\005??"
buf = "page fault", '\0' <repeats 245 times>
#3 0xc060ceac in trap_fatal (frame=0xcc7e2aa0, eva=0)
at /var/data/6s/src/sys/i386/i386/trap.c:836
code = 40
type = 12
ss = 40
esp = 0
softseg = {ssd_base = 0, ssd_limit = 1048575, ssd_type = 27,
ssd_dpl = 0, ssd_p = 1, ssd_xx = 8, ssd_xx1 = 3, ssd_def32 = 1, ssd_gran = 1}
msg = 0x0
#4 0xc060cc13 in trap_pfault (frame=0xcc7e2aa0, usermode=0, eva=0)
at /var/data/6s/src/sys/i386/i386/trap.c:744
va = 0
vm = (struct vmspace *) 0x0
map = 0xc0691f80
rv = 1
ftype = 1 '\001'
td = (struct thread *) 0xc1dd4480
p = (struct proc *) 0xc1dd3830
#5 0xc060c871 in trap (frame {tf_fs = -1066926072, tf_es = 40, tf_ds =
-1042481112, tf_edi = -1041406420, tf_esi = 0, tf_ebp = -864146676, tf_isp =
-864146740, tf_ebx = 128, tf_edx = 128, tf_ecx = 32, tf_eax = -1041406420,
tf_trapno = 12, tf_err = 0, tf_eip = -1067405446, tf_cs = 32, tf_eflags =
590338, tf_esp = 0, tf_ss = -1041405896})
at /var/data/6s/src/sys/i386/i386/trap.c:434
td = (struct thread *) 0xc1dd4480
p = (struct proc *) 0xc1dd3830
sticks = 3252503680
i = 0
ucode = 0
type = 12
code = 0
eva = 0
#6 0xc05fc6ca in calltrap () at /var/data/6s/src/sys/i386/i386/exception.s:139
No locals.
#7 0xc060af7a in generic_bcopy ()
at /var/data/6s/src/sys/i386/i386/support.s:489
No locals.
(kgdb) q
Kris Kennaway
2006-Mar-05 21:48 UTC
"page fault" panices after upgrading 5.4-RELEASE to 6.0-RELEASE/6.1-PRERELEASE
On Mon, Mar 06, 2006 at 11:42:05AM +0600, Pavel Gubin wrote:> Hello, > > I've got some machine which is almost idle and works now almost only as dialup > server. The problem was that this machine was very stable under 5.4-RELEASE, > but after upgrading (via buildworld/installworld) to 6.0-RELEASE-p4 and then > to 6.1-PRERELEASE (4 days ago) the machine panices (uptime from an hour to > a day or two).Are you using stale modules? Those panic traces don't make much sense to me. Kris -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060306/a7edc1a5/attachment.bin
Dmitry Pryanishnikov
2006-Mar-06 01:27 UTC
"page fault" panices after upgrading 5.4-RELEASE to 6.0-RELEASE/6.1-PRERELEASE
Hello! On Mon, 6 Mar 2006, Pavel Gubin wrote:> I've got some machine which is almost idle and works now almost only as dialup > server. The problem was that this machine was very stable under 5.4-RELEASE, > but after upgrading (via buildworld/installworld) to 6.0-RELEASE-p4 and then > to 6.1-PRERELEASE (4 days ago) the machine panices (uptime from an hour to > a day or two).I have one idea about this. You've said that machine acts as a dialup server. What kind of ppp do you use: kernel (devices ppp + process pppd) or user (devices tun + process ppp)? It seems to me that kernel ppp is seriously broken in RELENG_6, but I've never succeeded in getting a crashdump (my otherwise stable home machine just reboots from time to time when I use kernel ppp), so for now I've just switched to user ppp. Sincerely, Dmitry -- Atlantis ISP, System Administrator e-mail: dmitry@atlantis.dp.ua nic-hdl: LYNX-RIPE